Date: Mon, 16 Sep 2002 02:21:02 +0200 (CEST) From: Rasmus Skaarup <mfbsd@skaarup.org> To: Doug White <dwhite@gumbysoft.com> Cc: freebsd-hardware@freebsd.org Subject: Re: Intels new motherboard: SHG2 Message-ID: <20020916021448.V26391-100000@alfred.skaarup.org> In-Reply-To: <20020915145714.D4815-100000@carver.gumbysoft.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 15 Sep 2002, Doug White wrote:
> Rasmus,
>
> Can you post a dmesg for your system? I'm thinking you have a differnet
> board than a Hodges. Those chips show up on the Westville (SE7500WV2),
> and the dmesg will show a different chipset. The HG2 is ServerWorks while
> the WV2 is Intel.
No problem. There's quite a few <unknown card>'s but I don't think I'm
missing any functionality.. MYKERNEL is basically a GENERIC without all
the IPv6 stuff.
***
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-PRERELEASE #0: Mon Sep 16 02:46:40 CEST 2002
root@atmy.machine.dom:/usr/obj/usr/src/sys/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 2193538580 Hz
CPU: Pentium 4 (2193.54-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,
MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC>
real memory = 1073676288 (1048512K bytes)
avail memory = 1040109568 (1015732K bytes)
Preloaded elf kernel "kernel" at 0xc04c4000.
md0: Malloc disk
Using $PIR table, 19 entries at 0xc00f3070
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x8086, dev=0x2541) at 0.1
pcib1: <PCI to PCI bridge (vendor=8086 device=2545)> at device 3.0 on pci0
pci2: <PCI bus> on pcib1
pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0
pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on
pci2
pci5: <PCI bus> on pcib2
ahc_pci0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x3400-0x34ff mem
0xfeae0000-0xfeae0fff irq 9 at device 7.0 on pci5
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc_pci1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x3000-0x30ff mem
0xfeaf0000-0xfeaf0fff irq 9 at device 7.1 on pci5
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0
pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on
pci2
pci3: <PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> port
0x2040-0x207f mem 0xfe9a0000-0xfe9bffff irq 9 at device 7.0 on pci3
em0: Speed:100 Mbps Duplex:Full
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> port
0x2000-0x203f mem 0xfe9c0000-0xfe9dffff irq 9 at device 7.1 on pci3
em1: Speed:N/A Duplex:N/A
asr0: <Adaptec Caching SCSI RAID> mem 0xfa000000-0xfbffffff irq 9 at
device 8.0 on pci3
asr0: major=154
asr0: ADAPTEC 2110S FW Rev. 380E, 1 channel, 256 CCBs, Protocol I2O
pcib4: <PCI to PCI bridge (vendor=1044 device=a500)> at device 8.1 on pci3
pci4: <PCI bus> on pcib4
pci0: <unknown card> (vendor=0x8086, dev=0x2546) at 3.1
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x4020-0x403f
irq 9 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x4000-0x401f
irq 10 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcib5: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib5
pci1: <ATI Mach64-GR graphics accelerator> at 12.0 irq 11
isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at device 31.0 on
pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port
0x3a0-0x3af,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 0
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xcdfff,0xce000-0xcf7ff,0xcf800-0xd0fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port not found.
acd0: CDROM <SAMSUNG CD-ROM SN-124> at ata1-master PIO4
Waiting 15 seconds for SCSI devices to settle
pass1 at asr0 bus 0 target 6 lun 0
pass1: <ESG-SHV SCA HSBP M20 0.05> Fixed Processor SCSI-2 device
da0 at asr0 bus 0 target 0 lun 0
da0: <ADAPTEC RAID-1 380E> Fixed Direct Access SCSI-2 device
da0: Tagged Queueing Enabled
da0: 35074MB (71831552 512 byte sectors: 255H 63S/T 4471C)
***
Best regards,
Rasmus Skaarup
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020916021448.V26391-100000>