Date: Sat, 28 Aug 2010 23:49:43 +1200 From: Matthew Luckie <mjl@luckie.org.nz> To: Hans Petter Selasky <hselasky@c2i.net> Cc: freebsd-usb@freebsd.org Subject: Re: ZTE USB 3g stick Message-ID: <4C78F7D7.7010507@luckie.org.nz> In-Reply-To: <201008280950.35903.hselasky@c2i.net> References: <4C789A4E.9030409@luckie.org.nz> <201008280950.35903.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On 08/28/10 19:50, Hans Petter Selasky wrote: > On Saturday 28 August 2010 07:10:38 Matthew Luckie wrote: >> Hi >> >> I've got a 3g usb stick that works fine with 8.0-STABLE from Jan 3rd >> 2010, but does not with 8.1-RELEASE. Its a Vodafone branded stick >> bought in New Zealand. >> >> With FreeBSD 8.0 it prints this when I insert the stick: >> >> usb_test_autoinstall: Eject CD command status: USB_ERR_PENDING_REQUESTS >> ugen6.2:<ZTE,Incorporated> at usbus6 >> ugen6.2:<ZTE,Incorporated> at usbus6 (disconnected) >> ugen6.2:<ZTE,Incorporated> at usbus6 >> u3g0:<ZTE,Incorporated ZTE CDMA Technologies MSM, class 0/0, rev >> 2.00/0.00, addr 2> on usbus6 >> u3g0: Found 5 ports. >> umass0:<ZTE,Incorporated ZTE CDMA Technologies MSM, class 0/0, rev >> 2.00/0.00, addr 2> on usbus6 >> umass0: SCSI over Bulk-Only; quirks = 0x0000 >> umass0:2:0:-1: Attached to scbus2 >> (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 >> (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error >> (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition >> (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0 >> (probe0:umass-sim0:0:0:0): Medium not present >> (probe0:umass-sim0:0:0:0): Unretryable error >> da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 >> da0:<ZTE MMC Storage 2.31> Removable Direct Access SCSI-2 device >> da0: 40.000MB/s transfers >> da0: Attempt to query device size failed: NOT READY, Medium not present >> >> [mjl@mylar mjl]$ sudo usbconfig -u 6 dump_info >> ugen6.1:<EHCI root HUB Intel> at usbus6, cfg=0 md=HOST spd=HIGH >> (480Mbps) pwr=ON >> >> ugen6.2:<ZTE CDMA Technologies MSM ZTE,Incorporated> at usbus6, cfg=0 >> md=HOST spd=HIGH (480Mbps) pwr=ON >> >> On FreeBSD 8.1 it prints this: >> >> ugen6.2:<ZTE,Incorporated> at usbus6 >> >> (and nothing else) >> >> [mjl@mylar mjl]$ sudo usbconfig -d 6.2 dump_device_desc >> ugen6.2:<ZTE CDMA Technologies MSM ZTE,Incorporated> at usbus6, cfg=255 >> md=HOST spd=HIGH (480Mbps) pwr=ON >> >> bLength = 0x0012 >> bDescriptorType = 0x0001 >> bcdUSB = 0x0200 >> bDeviceClass = 0x0000 >> bDeviceSubClass = 0x0000 >> bDeviceProtocol = 0x0000 >> bMaxPacketSize0 = 0x0040 >> idVendor = 0x19d2 >> idProduct = 0x2000 >> bcdDevice = 0x0000 >> iManufacturer = 0x0002<ZTE,Incorporated> >> iProduct = 0x0001<ZTE CDMA Technologies MSM> >> iSerialNumber = 0x0003<P673A2VDF_MS> >> bNumConfigurations = 0x0001 > > Have you loaded the u3g driver before plugging the device. Also try: Yes, I have. [mjl@mylar mjl]$ sudo kldload /boot/kernel/u3g.ko kldload: can't load /boot/kernel/u3g.ko: File exists module_register: module uhub/u3g already exists! Module uhub/u3g failed to register: 17 > usbconfig -d 6.2 set_config 0 ugen6.2: <ZTE,Incorporated> at usbus6 umass0: <ZTE,Incorporated ZTE CDMA Technologies MSM, class 0/0, rev 2.00/0.00, addr 2> on usbus6 cd1 at umass-sim0 bus 0 scbus2 target 0 lun 0 cd1: <ZTE USB SCSI CD-ROM 2.31> Removable CD-ROM SCSI-2 device cd1: 40.000MB/s transfers cd1: cd present [31484 x 2048 byte records] Sadly no /dev/cuaU* entries. After the set_config, I have new /dev entries for cd1, iso9660, pass1, and of course ugen6.2. [mjl@mylar ~]$ sudo usbconfig -d 6.2 dump_device_desc ugen6.2: <ZTE CDMA Technologies MSM ZTE,Incorporated> at usbus6, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x0000 bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0040 idVendor = 0x19d2 idProduct = 0x2000 bcdDevice = 0x0000 iManufacturer = 0x0002 <ZTE,Incorporated> iProduct = 0x0001 <ZTE CDMA Technologies MSM> iSerialNumber = 0x0003 <P673A2VDF_MS> bNumConfigurations = 0x0001
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4C78F7D7.7010507>