Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 22 Jan 2000 17:06:53 -0700 (MST)
From:      George Vagner <george@www.timandpatrick.com>
To:        Oleg Ogurok <oleg@ogurok.com>, questions@freebsd.org
Subject:   RE: SCSI errors and tape doesn't work
Message-ID:  <XFMail.000122170653.george@vagner.com>
In-Reply-To: <Pine.BSF.4.10.10001221533180.334-100000@ogurok.com>

next in thread | previous in thread | raw e-mail | index | archive | help
if your using an isa scsi card make sure that you have
the irq and dma assigned to legasy/isa in your bios
setup.

i get all sorts of timeout errors when i set mine
to PNP.


On 22-Jan-00 Oleg Ogurok wrote:
> 
> Does anyone know what these could mean?
> Also when I try to use my scsi tape drive, "dump" starts dumping, and then
> stops in couple of seconds, and I can't even "kill -9" that dump process.
> 
> 
> 
> Jan 22 15:31:03 mybox /kernel: (probe4:ahc0:0:4:0): SCB 0xa - timed out in
> datain phase,
>  SEQADDR == 0x110 
> Jan 22 15:31:03 mybox /kernel: (probe4:ahc0:0:4:0): BDR message in message
> buffer 
> Jan 22 15:31:03 mybox /kernel: (probe4:ahc0:0:4:0): data overrun detected
> in Data-In pha
> se.  Tag == 0xa. 
> Jan 22 15:31:03 mybox /kernel: (probe4:ahc0:0:4:0): Have seen Data Phase.
> Length = 255.
>   NumSGs = 1. 
> Jan 22 15:31:03 mybox /kernel: (probe4:ahc0:0:4:0): no longer in timeout,
> status = 352 
> Jan 22 15:31:03 mybox /kernel: (probe4:ahc0:0:4:0): SCB 0xa - timed out in
> datain phase,
>  SEQADDR == 0x110 
> Jan 22 15:31:03 mybox /kernel: (probe4:ahc0:0:4:0): BDR message in message
> buffer 
> Jan 22 15:31:03 mybox /kernel: (probe4:ahc0:0:4:0): data overrun detected
> in Data-In pha
> se.  Tag == 0xa. 
> Jan 22 15:31:03 mybox /kernel: (probe4:ahc0:0:4:0): Have seen Data Phase.
> Length = 255.
>   NumSGs = 1. 
> Jan 22 15:31:03 mybox /kernel: (probe4:ahc0:0:4:0): no longer in timeout,
> status = 352 
> Jan 22 15:31:03 mybox /kernel: sa0 at ahc0 bus 0 target 4 lun 0 
> Jan 22 15:31:03 mybox /kernel: sa0: <Seagate STT8000N 3.44> Removable
> Sequential Access 
> SCSI-2 device 
> Jan 22 15:31:03 mybox /kernel: sa0: 10.000MB/s transfers (10.000MHz,
> offset 15) 
>  
> 
> Oleg Ogurok
> oleg@ogurok.com
> http://www.ogurok.com
> For PGP Public Key go to http://www.ogurok.com/pgpkey.txt
> 
> 
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message

----------------------------------
E-Mail: George Vagner <george@vagner.com>
Date: 22-Jan-00
Time: 17:05:12

This message was sent by XFMail
----------------------------------


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?XFMail.000122170653.george>