Date: Tue, 02 Nov 2010 10:32:08 +0100 From: Alexander Leidinger <Alexander@Leidinger.net> To: hselasky@FreeBSD.org Cc: usb@FreeBSD.org Subject: usbconfig reset ugen4.2 hanging since an hour Message-ID: <20101102103208.45064dxs60sp833w@webmail.leidinger.net>
next in thread | raw e-mail | index | archive | help
Hi, I have a memory stick which made problems (the stick is used as a ZFS cache and it moaned about 8xxM write problems) in 9-current r214509. I removed the device from the config, made a camcontrol reset all, camcontrol rescan all (-> device disappeared), and then tried an usbconfig reset ugen4.2 (relevant devlist part from before the call is below). The usbconfig reset does not return to the shell. I do not know if the problem with the USB memory stick is related to software or hardware. The stick survived just a weekend, I replaced it because the old one showed similar problems after surviving about 9 months... I updated -current just before the problems appeared (and then again after a week or two), but I do not remember from which revision of -current I was updating from. I will try to stress-test the memory sticks on a 8.1 system so see if it is some software problem. The big question I have for now is: shouldn't there be some kind of safety mechanism kicking in (timeout) with the usbconfig command (in this case the reset)? devlist: ---snip--- ugen4.1: <EHCI root HUB Intel> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen4.2: <Flash Disk USB 2.0> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ---snip--- dmesg | grep -i usb: ---snip--- uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xdc00-0xdc1f irq 16 at device 29.0 on pci0 usbus0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xe000-0xe01f irq 19 at device 29.1 on pci0 usbus1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xe400-0xe41f irq 18 at device 29.2 on pci0 usbus2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xe800-0xe81f irq 16 at device 29.3 on pci0 usbus3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xfe77fc00-0xfe77ffff irq 23 at device 29.7 on pci0 usbus4: EHCI version 1.0 usbus4: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 Root mount waiting for: usbus4 Root mount waiting for: usbus4 Root mount waiting for: usbus4 Root mount waiting for: usbus4 ugen4.2: <USB 2.0> at usbus4 umass0: <USB 2.0 Flash Disk, class 0/0, rev 2.00/1.00, addr 2> on usbus4 Root mount waiting for: usbus4 pass3: <USB 2.0 Flash Disk 5.00> Removable Direct Access SCSI-2 device da0: <USB 2.0 Flash Disk 5.00> Removable Direct Access SCSI-2 device Root mount waiting for: usbus4 ugen1.2: <vendor 0x1941> at usbus1 ugen1.3: <vendor 0x04f9> at usbus1 ulpt0: <vendor 0x04f9 product 0x0100, class 0/0, rev 1.00/1.00, addr 3> on usbus1 ugen2.2: <Logitech> at usbus2 uhub5: <Logitech Logitech BT Mini-Receiver, class 9/0, rev 2.00/49.00, addr 2> on usbus2 ugen2.3: <Logitech> at usbus2 ukbd0: <Logitech Logitech BT Mini-Receiver, class 0/0, rev 2.00/49.00, addr 3> on usbus2 ugen2.4: <Logitech> at usbus2 ums0: <Logitech Logitech BT Mini-Receiver, class 0/0, rev 2.00/49.00, addr 4> on usbus2 ---snip--- Bye, Alexander. -- The man who laughs has not yet been told the terrible news. -- Bertolt Brecht http://www.Leidinger.net Alexander @ Leidinger.net: PGP ID = B0063FE7 http://www.FreeBSD.org netchild @ FreeBSD.org : PGP ID = 72077137
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20101102103208.45064dxs60sp833w>