Date: Wed, 1 Dec 2010 12:02:31 +0800 From: Adrian Chadd <adrian@freebsd.org> To: Monthadar Al Jaberi <monthadar@gmail.com> Cc: freebsd-net@freebsd.org Subject: Re: Bridging mesh with wired not working? Message-ID: <AANLkTikBv%2BBSQbr0MfzkqhADC-twHsc=WNKTCLOU8x2=@mail.gmail.com> In-Reply-To: <AANLkTimvjuvYJLbXgMsX%2BsRjGiNeXVFL%2BZZwf3W30oOn@mail.gmail.com> References: <AANLkTimvjuvYJLbXgMsX%2BsRjGiNeXVFL%2BZZwf3W30oOn@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I believe that's supposed to work. :-) adrian On 30 November 2010 15:38, Monthadar Al Jaberi <monthadar@gmail.com> wrote: > Hi, > > Can anyone confirm that bridging a mesh with a wired interface is not > working? I want to make sure that it is not a problem from my side. > > When I ping from outside the mesh I get: "!valid or proxy" and "frame > not fwd'd, no path" from the debug information. > > My setup is simple > > STA --- MPP )) -- (( MP > > STA: Ubuntu PC > MPP: RSPRO mesh portal bridging wired and mesh > MP: RSPRO mesh point > > ifconfig for MPP: > arge0: flags=3D8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> > metric 0 mtu 1500 > =A0 =A0 =A0 =A0options=3D80000<LINKSTATE> > =A0 =A0 =A0 =A0ether XX:XX:XX:XX:XX:XX > =A0 =A0 =A0 =A0media: Ethernet autoselect (100baseTX <full-duplex>) > =A0 =A0 =A0 =A0status: active > wlan0: flags=3D8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> > metric 0 mtu 1500 > =A0 =A0 =A0 =A0ether YY:YY:YY:YY:YY:YY > =A0 =A0 =A0 =A0inet 192.168.1.91 netmask 0xffffff00 broadcast 192.168.1.2= 55 > =A0 =A0 =A0 =A0media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <= mesh> > =A0 =A0 =A0 =A0status: running > =A0 =A0 =A0 =A0meshid monty channel 1 (2412 MHz 11g) bssid 00:15:6d:67:21= :8d > =A0 =A0 =A0 =A0country US ecm authmode OPEN privacy OFF txpower 20 scanva= lid 60 > =A0 =A0 =A0 =A0protmode CTS wme burst meshttl 31 meshpeering meshforward > =A0 =A0 =A0 =A0meshmetric AIRTIME meshpath HWMP hwmprootmode DISABLED hwm= pmaxhops 31 > bridge0: flags=3D28943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST,PPR= OMISC> > metric 0 mtu 1500 > =A0 =A0 =A0 =A0ether ZZ:ZZ:ZZ:ZZ:ZZ:ZZ > =A0 =A0 =A0 =A0id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 1= 5 > =A0 =A0 =A0 =A0maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200 > =A0 =A0 =A0 =A0root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0 > =A0 =A0 =A0 =A0member: arge0 flags=3D143<LEARNING,DISCOVER,AUTOEDGE,AUTOP= TP> > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0ifmaxaddr 0 port 4 priority 128 path cost = 200000 > =A0 =A0 =A0 =A0member: wlan0 flags=3D143<LEARNING,DISCOVER,AUTOEDGE,AUTOP= TP> > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0ifmaxaddr 0 port 7 priority 128 path cost = 370370 > > br, > -- > //Monthadar Al Jaberi > _______________________________________________ > freebsd-net@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-net > To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AANLkTikBv%2BBSQbr0MfzkqhADC-twHsc=WNKTCLOU8x2=>