Date: Fri, 22 Jun 2001 12:48:37 +0200 From: Darian Lanx <content@openprojects.net> To: "Andrey Nepomnyaschih" <nas@chartpilot.ru>, <bio@gmx.net> Cc: freebsd-questions@freebsd.org Subject: Re: IBM DTLA307030 (which is an UDMA100 device) only seen as UDMA33 ? Message-ID: <200106221247.52270@obscuro.org> In-Reply-To: <LNEEKBEPHJHNDLPKMLIAGEBHCKAA.nas@chartpilot.ru> References: <LNEEKBEPHJHNDLPKMLIAGEBHCKAA.nas@chartpilot.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
On Friday 22 June 2001 12:08, Andrey Nepomnyaschih wrote: > Hello Darian, > > Can you post your dmesg output? Of course, sorry, I forgot to add it in the first place,. I do nto which=20 parts are really relevant, but I shortened the full output a bit., ---- pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <Intel 82801BA/BAM (ICH2) PCI-PCI (AGP) bridge> at device 1.0 on p= ci0 pci1: <PCI bus> on pcib1 pci1: <NVidia GeForce2 GTS graphics accelerator> at 0.0 irq 11 pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci= 0 pci2: <PCI bus> on pcib2 tekram_trm0: <Tekram DC395U/UW/F DC315/U Fast20 Wide SCSI Adapter> port=20 0xd800-0xd8ff mem 0xed800000-0xed800fff irq 9 at device 10.0 on pci2 tekram_trm0: driver is using old-style compatibility shims pcm0: <Creative EMU10K1> port 0xd400-0xd41f irq 9 at device 12.0 on pci2 rl0: <RealTek 8139 10/100BaseTX> port 0xb800-0xb8ff mem 0xed000000-0xed00= 00ff=20 irq 9 at device 13.0 on pci2 rl0: Ethernet address: 00:50:bf:1a:2c:f8 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci= 0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 ATA100 controller> port 0xa800-0xa80f at device 31.1= on=20 pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xa400-0xa41f= irq=20 5 at device 31.2 on pci0 usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0xe800-0xe80f irq 1= 0 at=20 device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus general purpose I/O> on smbus0 uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xa000-0xa01f= irq=20 9 at device 31.4 on pci0 usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2 uhub2: 4 ports with 4 removable, self powered fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse Explorer, device ID 4 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppi0: <Parallel I/O> on ppbus0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ad0: 29311MB <Maxtor 53073U6> [59554/16/63] at ata0-master UDMA66 ad2: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata1-master UDMA33 Waiting 15 seconds for SCSI devices to settle Mounting root from ufs:/dev/ad0s3a cd0 at tekram_trm0 bus 0 target 1 lun 0 cd0: <TOSHIBA DVD-ROM SD-M1401 1007> Removable CD-ROM SCSI-2 device cd0: 20.000MB/s transfers (20.000MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present cd1 at tekram_trm0 bus 0 target 4 lun 0 cd1: <YAMAHA CRW8824S 1.00> Removable CD-ROM SCSI-2 device cd1: 20.000MB/s transfers (20.000MHz, offset 15) cd1: Attempt to query device size failed: NOT READY, Medium not present -= =20 tray closed --- Thanks again To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200106221247.52270>