Date: Sun, 20 Jun 1999 07:55:06 +0500 (SAMST) From: "Vladimir A. Petrov" <V.Petrov@VAZ.RU> To: FreeBSD questions mail list <Freebsd-questions@FreeBSD.ORG> Subject: Problem with cdrecord and RICOH MP6200S at FreeBSD-3.2-RELEASE Message-ID: <Pine.BSF.3.96.990620072014.5105A-100000@halfwasp.ooasu.vaz.ru>
next in thread | raw e-mail | index | archive | help
Hello! I have a hard problem with using cdrecord-1.8a22 at FreeBSD-3.2-RELEASE. Any type of write session will always fail with a SCSI error. Any help will be appreciable. Hardware what I use: CD-RW: RICOH MP6200S (firmware version 2.40) SCSI : Tekram DC-390U (NCR 53c875 based) === cdrecord out begin === cdrecord: No such file or directory. WARNING: RR-scheduler not available, disabling. Cdrecord release 1.8a22 Copyright (C) 1995-1999 Jörg Schilling TOC Type: 0 = CD-DA scsidev: '0,1,0' scsibus: 0 target: 1 lun: 0 atapi: 0 Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : Vendor_info : 'RICOH ' Identifikation : 'MP6200S ' Revision : '2.40' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Drive buf size : 786432 = 768 KB FIFO size : 6291456 = 6144 KB cdrecord: Undefined error: 0. WARNING: RR-scheduler not available, disabling. Track 01: audio 26 MB (02:39.73) no preemp Track 02: audio 31 MB (03:09.22) no preemp Total size: 59 MB (05:50.96) = 26322 sectors Lout start: 59 MB (05:52/72) = 26322 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Reference speed: 2 Is not unrestricted Is erasable ATIP start of lead in: -11625 (97:27/00) ATIP start of lead out: 333750 (74:12/00) speed low: 2 speed high: 2 power mult factor: 5 6 recommended erase/write power: 3 Disk type: phase change Manuf. index: 81 Manufacturer: ILLEGAL: Old Ritek Co.??? Blocks total: 333750 Blocks current: 333750 Blocks remaining: 307428 RBlocks total: 336246 RBlocks current: 336246 RBlocks remaining: 309924 Starting to write CD/DVD at speed 2 in write mode for single session. Last chance to quit, starting real write in 9 seconds.8 seconds.7 seconds.6 seconds.5 seconds.4 seconds.3 seconds.2 seconds.1 seconds. Waiting for reader process to fill input-buffer ... input-buffer ready. Starting new track at sector: 0 Track 01: 0 of 26 MB written. Track 01: 1 of 26 MB written (fifo 100%).cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error status: 0x2 (CHECK CONDITION) CDB: 2A 00 00 00 01 CB 00 00 1B 00 Sense Bytes: F0 00 03 00 00 00 4A 0A 00 00 00 00 0C 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0 Sense flags: Blk 74 (valid) cmd finished after 0.188s timeout 40s cdrecord: Input/output error. flush cache: scsi sendcmd: retryable error status: 0x2 (CHECK CONDITION) write track data: error after 1079568 bytes Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 CDB: 35 00 00 00 00 00 00 00 00 00 Sense Bytes: 70 00 0B 00 00 00 00 0A 00 00 00 00 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0xB Aborted Command, Segment 0 Sense Code: 0x50 Qual 0x00 (write append error) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 13.065s timeout 120s Trouble flushing the cache Writing time: 27.767s Fixating... cdrecord: fifo had 113 puts and 18 gets. cdrecord: fifo was 0 times empty and 9 times full, min fill was 96%. Fixating time: 135.730s === cdrecord out end === === kernel configuration begin === machine "i386" ident "halfwasp-3.2-1.0.3" maxusers 32 config kernel root on da0 cpu "I586_CPU" options "CPU_FASTER_5X86_FPU" options "CPU_SUSP_HLT" options "NO_F00F_HACK" options SYSVSHM options SYSVSEM options SYSVMSG options UCONSOLE options INET pseudo-device ether pseudo-device loop pseudo-device bpfilter 4 pseudo-device tun 1 options IPFIREWALL options IPFIREWALL_VERBOSE options IPDIVERT options "ICMP_BANDLIM" options FFS options SUIDDIR controller scbus0 device da0 device cd0 device pass0 options SCSI_DELAY=3000 pseudo-device pty 16 pseudo-device gzip pseudo-device vn controller isa0 options "AUTO_EOI_1" options "AUTO_EOI_2" controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device vga0 at isa? port ? conflicts pseudo-device splash device sc0 at isa? tty flags 0x06 options MAXCONS=4 options SC_HISTORY_SIZE=200 device npx0 at isa? port IO_NPX iosiz 0x0 flags 0x0 irq 13 controller wdc0 at isa? port "IO_WD1" bio irq 14 flags 0x0000b0ff disk wd0 at wdc0 drive 0 controller wdc1 at isa? port "IO_WD2" bio irq 15 options ATAPI options ATAPI_STATIC options IDE_DELAY=10000 device acd0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 device sio0 at isa? port "IO_COM1" irq 4 device sio1 at isa? port "IO_COM2" irq 3 controller pci0 controller ncr0 device xl0 controller ppbus0 device lpt0 at ppbus? device ppc0 at isa? port? tty irq 7 === kernel configuration end === === kernel boot output begin === Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.2-RELEASE #1: Sun Jun 20 05:11:10 SAMST 1999 root@halfwasp.ooasu.vaz.ru:/usr/src/sys/compile/halfwasp-3.2-1.0.3 Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 132873187 Hz CPU: Pentium/P54C (132.87-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x526 Stepping=6 Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> real memory = 67108864 (65536K bytes) avail memory = 62869504 (61396K bytes) Preloaded elf kernel "kernel" at 0xc024a000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc024a09c. Probing for devices on PCI bus 0: chip0: <Intel 82437FX PCI cache memory controller> rev 0x02 on pci0.0.0 chip1: <Intel 82371FB PCI to ISA bridge> rev 0x02 on pci0.7.0 ide_pci0: <Intel PIIX Bus-master IDE controller> rev 0x02 on pci0.7.1 ncr0: <ncr 53c875 fast20 wide scsi> rev 0x01 int a irq 9 on pci0.17.0 vga0: <ATI Mach64-VT graphics accelerator> rev 0x08 int a irq 10 on pci0.18.0 xl0: <3Com 3c900-COMBO Etherlink XL> rev 0x00 int a irq 11 on pci0.20.0 xl0: Ethernet address: 00:10:4b:6d:b3:0b xl0: selecting BNC port, half duplex Probing for devices on the ISA bus: sc0 flags 0x6 on isa sc0: VGA color <4 virtual consoles, flags=0x6> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa ppc0 at 0x378 irq 7 on isa ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode lpt0: <generic printer> on ppbus 0 lpt0: Interrupt-driven port lpt0: <generic printer> on ppbus 0 lpt0: Interrupt-driven port wdc0 at 0x1f0-0x1f7 irq 14 flags 0xb0ff on isa wdc0: unit 0 (wd0): <WDC AC34300L>, LBA, 32-bit, multi-block-16 wd0: 4104MB (8406720 sectors), 523 cyls, 255 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (atapi): <655A/5.2D>, removable, iordy atapi1.0: unknown phase last message repeated 4 times fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fd0: 1.44MB 3.5in vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A IP packet filtering initialized, divert enabled, rule-based forwarding disabled, unlimited logging Waiting 3 seconds for SCSI devices to settle changing root deda0 at ncr0 bus 0 target 0 lun 0 da0: <SEAGATE ST51080N 0958> Fixed Direct Access SCSI-2 device da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da0: 1030MB (2109840 512 byte sectors: 255H 63S/T 131C) vice to da0s1a cd0 at ncr0 bus 0 target 1 lun 0 cd0: <RICOH MP6200S 2.40> Removable CD-ROM SCSI-2 device cd0: 3.300MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present === kernel boot output end === ______________________________________________________________________________ Vladimir A. Petrov | I had slept and seen a dream, I seen a Windows aka vap | of the future, and it was almost working. FidoNet: 2:5075/21.21 | Nothing in the world is perfect but so many perfected. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.990620072014.5105A-100000>