Date: Fri, 21 Feb 2003 18:46:09 +0100 From: taxman <taxman@acd.net> To: Michael <soppscum@online.no>, freebsd-questions@FreeBSD.ORG Subject: Re: 5.0-RELEASE kernel boot problem on acer travelmate 210TEV (laptop) Message-ID: <200302211846.09122.taxman@acd.net> In-Reply-To: <20030221145033.2f5af08c.soppscum@online.no> References: <20030221145033.2f5af08c.soppscum@online.no>
next in thread | previous in thread | raw e-mail | index | archive | help
On Friday 21 February 2003 02:50 pm, Michael wrote: (snipped) > I've been using 4.X for some time with no problems(that I can remember = =3D) >=20 > So i'm booting the install 5-RELEASE mini cd : Ok this is getting out of hand. 5.0 is a testing release. See: http://www.freebsd.org/releases/5.0R/early-adopter.html so of course it is not going to work for everything. Development is=20 proceeding rapidly on 5.0, so the problem you're seeing may be fixed alre= ady.=20 Installing -current would be the only way to know. if you tried that and= got=20 the same error, then they would love to hear about it on the -current mai= ling=20 list so that it can be properly fixed. It's not likely it will ever be f= ixed=20 for 5.0 release, which is a static point on an again, rapidly moving,=20 development track. =09If 4.x works well then use that, or if you want to experiment try -cur= rent,=20 perhaps by installing a snapshot. =09As a side note, should we put something in the FAQ about this, pointin= g to=20 the early adopters guide perhaps? I'll write it up if someone will mark = it=20 up and commit it. Just my thoughts, =09Tim >=20 > Hit [Enter] to boot immediately, or any other key for command prompt. > Booting [/boot/kernel/kernel] in 8 seconds... >=20 > Type '?' for a list of commands, 'help' for more detailed help. > OK set hint.acpi.0.disabled=3D1 > OK boot kernel >=20 > ..... > ..... >=20 > Preloaded mfs_root "/boot/mfsroot" at 0xc0600a8. > Timercounter "i8254" frequency 1193182 Hz > Timercounter "TSC" frequency 697419320 Hz > CPU: Pentium III/Pentium III Xeon/Celeron (697.42-MHz 686-class CPU) > Origin =3D "GenuineIntel" id =3D 0x686 Stepping =3D 6 > =20 Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,= CMOV,PAT,PSE36,MMX,FXSR,SSE> > real memory =3D 125763584 (119 MB) > avail memory =3D 111136768 (105 MB) > Initializing GEOMetry subsystem > Pentium Pro MTRR support enabled > md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc062679c > npx0: <math processor> on motherboard > npx0: INT 16 interface > Using: $PIR table, 5 entries at 0xc00fb9d0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <PCI bus> on pcib0 > agp0: <Ali Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at dev= ice=20 0.0 on pci0 > panic: contigmalloc1: size must not be 0 > Uptime: 1s > Automatic reboot in 15 seconds - press a key on the console to abort To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200302211846.09122.taxman>