Date: Sun, 19 Oct 2003 20:08:13 +0200 From: Reinhard Speyerer <rspmn@arcor.de> To: "Zhang Weiwu" <weiwuzhang@hotmail.com> Cc: freebsd-mobile@freebsd.org Subject: Re: talk to Motorola 6288 phone and go GPRS with infrared Message-ID: <200310191808.UAA00940.niftpqrx@arcor.de> In-Reply-To: <F895Csmr77jy3BWUhUt00021d7f@hotmail.com> (weiwuzhang@hotmail.com)
next in thread | previous in thread | raw e-mail | index | archive | help
>>> On Sat, 18 Oct 2003 15:39:41 +0800, "ZW" == "Zhang Weiwu" <weiwuzhang@hotmail.com> wrote: ZW> Do I actually need birda when all what I want is to dial-up to ZW> the Internet with the phone? Yes, you need ircomm(1) from the birda package and an unused PTY, e.g. ttypf: ircomm -d /dev/cuaa0 -m 115200 -y /dev/ptypf & After starting ircomm this way you should be able to use the ppp(8) configuration example for GPRS given on Randy Bush's homepage (http://www.psg.com/~randy) (replace /dev/cuaa0 with /dev/ttypf in the "set device ..." line and the APN with the correct APN for your network operator in AT+CDGCONT=...). To make sure that IR communication to the phone works you might want to start ircomm with -v 3 first: ircomm -d /dev/cuaa0 -m 115200 -y /dev/ptypf -v 3& and check with cu or kermit that sending of AT commands works: cu -l ttypf -s 115200 Connected. AT+CGMM Motorola 6288 OK ~. Regards, Reinhard
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200310191808.UAA00940.niftpqrx>