Date: Fri, 2 Feb 2001 18:19:08 -0800 (PST) From: Sean Eric Fagan <sef@kithrup.com> To: mobile@freebsd.org Subject: Re: HP OmniBook 4100 Message-ID: <200102030219.SAA15733@kithrup.com>
next in thread | raw e-mail | index | archive | help
>I'm trying another couple of things, and if those don't work, I'll have the >config file and my boot -v output. Well, they didn't work, so here they are. First the boot -v output: Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.2-RELEASE #0: Fri Feb 2 17:54:42 PST 2001 root@laptop:/usr/src/sys/compile/SEF Calibrating clock(s) ... TSC clock: 232091350 Hz, i8254 clock: 1193110 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium II/Pentium II Xeon/Celeron (232.11-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping = 2 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 100663296 (98304K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x00369000 - 0x040e7fff, 64483328 bytes (15743 pages) 0x04100000 - 0x05ff7fff, 32473088 bytes (7928 pages) avail memory = 94502912 (92288K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f6010 bios32: Entry = 0xfd7b0 (c00fd7b0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0x23b pnpbios: Found PnP BIOS data at 0xc00f6040 pnpbios: Entry = f0000:a8a6 Rev = 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: ACPI: 000f5fd0 Preloaded elf kernel "kernel" at 0xc0350000. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 pci_open(1): mode 1 addr port (0x0cf8) is 0x80003904 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086) apm0: <APM BIOS> on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086) pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard found-> vendor=0x8086, dev=0x7192, revid=0x02 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base 00000000, size 26 found-> vendor=0x10c8, dev=0x0004, revid=0x01 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=255 map[10]: type 1, range 32, base fd000000, size 24 map[14]: type 1, range 32, base fea00000, size 21 map[18]: type 1, range 32, base fed00000, size 20 found-> vendor=0x104c, dev=0xac16, revid=0x02 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=255 found-> vendor=0x104c, dev=0xac16, revid=0x02 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=0 secondarybus=0 intpin=b, irq=255 found-> vendor=0x8086, dev=0x7110, revid=0x02 class=06-80-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7111, revid=0x01 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000fcf0, size 4 found-> vendor=0x8086, dev=0x7112, revid=0x01 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=10 found-> vendor=0x8086, dev=0x7113, revid=0x02 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[90]: type 1, range 32, base 00002180, size 4 pci0: <PCI bus> on pcib0 pci0: <NeoMagic MagicGraph 128XD SVGA controller> (vendor=0x10c8, dev=0x0004) at 2.0 pcic-pci0: <TI PCI-1250 PCI-CardBus Bridge> at device 4.0 on pci0 pcic-pci0: TI12XX PCI Config Reg: [speaker enable][pwr save][FUNC pci int + CSC serial isa irq] pcic-pci0: Legacy address set to 0x3e0 PCI Config space: 00: ac16104c 02100007 06070002 00824008 10: 00000000 020000a0 20000000 00000000 20: 00000000 00000000 00000000 00000000 30: 00000000 00000000 00000000 03c001ff 40: 0002103c 000003e1 00000000 00000000 50: 00000000 00000000 00000000 00000000 60: 00000000 00000000 00000000 00000000 70: 00000000 00000000 00000000 00000000 80: 08449060 00000000 81010000 fecb2975 90: 616602c0 00000000 00000000 00000000 Cardbus Socket registers: 00: f000ff53: f000ff53: f000e2c3: f000ff53: 10: f000ff53: f000ff54: f00096be: f000ff53: ExCa registers: 00: eb 88 d5 43 30 d2 66 f7 f3 88 d7 5a 66 3d ff 03 10: 00 00 fb 77 44 86 c4 c0 c8 02 08 e8 40 91 88 fe 20: 28 e0 8a 66 02 38 e0 72 02 88 e0 bf 05 00 c4 5e 30: 04 50 b4 02 cd 13 5b 73 0a 4f 74 1c 30 e4 cd 13 pcic-pci1: <TI PCI-1250 PCI-CardBus Bridge> at device 4.1 on pci0 pcic-pci1: TI12XX PCI Config Reg: [speaker enable][pwr save][FUNC pci int + CSC serial isa irq] PCI Config space: 00: ac16104c 02100007 06070002 00824008 10: 00000000 020000a0 20000000 00000000 20: 00000000 00000000 00000000 00000000 30: 00000000 00000000 00000000 03c002ff 40: 0002103c 000003e1 00000000 00000000 50: 00000000 00000000 00000000 00000000 60: 00000000 00000000 00000000 00000000 70: 00000000 00000000 00000000 00000000 80: 08449060 00000000 81010000 fecb2975 90: 616602c0 00000000 00000000 00000000 Cardbus Socket registers: 00: f000ff53: f000ff53: f000e2c3: f000ff53: 10: f000ff53: f000ff54: f00096be: f000ff53: ExCa registers: 00: eb 88 d5 43 30 d2 66 f7 f3 88 d7 5a 66 3d ff 03 10: 00 00 fb 77 44 86 c4 c0 c8 02 08 e8 40 91 88 fe 20: 28 e0 8a 66 02 38 e0 72 02 88 e0 bf 05 00 c4 5e 30: 04 50 b4 02 cd 13 5b 73 0a 4f 74 1c 30 e4 cd 13 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xfcf0-0xfcff at device 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcf0 ata0: mask=03 status0=50 status1=00 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI probe a=00 b=00 ata0-slave: ATAPI probe a=00 b=00 ata0: mask=03 status0=50 status1=00 ata0-master: ATA probe a=01 b=a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfcf8 ata1: mask=03 status0=01 status1=01 ata1: mask=03 ostat0=2d ostat2=2d ata1-master: ATAPI probe a=2b b=2b ata1-slave: ATAPI probe a=28 b=28 ata1: mask=03 status0=2b status1=28 ata1-master: ATA probe a=0f b=0f ata1-slave: ATA probe a=0f b=0f ata1: devices=00 ata1: at 0x170 irq 15 on atapci0 pci0: <Intel 82371AB/EB (PIIX4) USB controller> (vendor=0x8086, dev=0x7112) at 7.2 irq 10 chip1: <Intel 82371AB Power management controller> port 0x2180-0x218f at device 7.3 on pci0 ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata2 failed to probe at port 0x1f0 irq 14 on isa0 ata3 failed to probe at port 0x170 irq 15 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00fc kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 irq 3 on isa0 pcic0: management irq 3 stat is 4c stat is 0 pccard0: <PC Card bus -- kludge version> on pcic0 pccard1: <PC Card bus -- kludge version> on pcic0 sio0: irq maps: 0x49 0x59 0x49 0x49 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/7 bytes threshold plip0: <PLIP network interface> on ppbus0 bpf: lp0 attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0 fe0 failed to probe at port 0x300-0x31f on isa0 isa_probe_children: probing PnP devices Slot 0 chg = 0x4 BIOS Geometries: 0:03df7f3f 0..991=992 cylinders, 0..127=128 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: faith0 attached bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: lo0 attached ata0-master: success setting UDMA2 on PIIX4 chip Creating DISK ad0 Creating DISK wd0 ad0: <IBM-DTCA-24090/TC6OAB4A> ATA-3 disk at ata0-master ad0: 3909MB (8007552 sectors), 7944 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=4 dmamode=2 udmamode=2 cblid=0 ad0: 3909MB <IBM-DTCA-24090> [7944/16/63] at ata0-master UDMA33 Mounting root from ufs:/dev/ad0s2a pccard: card inserted, slot 0 ad0s1: type 0xb, start 63, end = 3483647, size 3483585 : OK ad0s2: type 0xa5, start 3483648, end = 7660799, size 4177152 : OK ad0s4: type 0xa0, start 7660800, end = 7999487, size 338688 : OK start_init: trying /sbin/init Linux-ELF exec handler installed pcic: I/O win 0 flags 17 240-24f pcic: I/O win 0 flags 7 240-24f ep0: <3Com Etherlink III 3C589> at port 0x240-0x24f irq 10 slot 0 on pccard0 pcic: I/O win 0 flags 17 240-24f ep0: Ethernet address 00:a0:24:a9:f2:bf bpf: ep0 attached ------------ Now the config file: # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.20 2000/10/31 23:16:07 n_hibma Exp $ machine i386 cpu I686_CPU ident SEF maxusers 32 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options UCONSOLE #Allow users to grab the console options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O device isa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives options ATA_STATIC_ID #Static device numbering #options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver # pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) #device apm0 at nexus? disable flags 0x20 # Advanced Power Management device apm # PCCARD (PCMCIA) support device card device pcic0 at isa? irq 3 port 0x3e0 iomem 0xd0000 #device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 disable # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da device pcm # sound ? # ISA Ethernet NICs. device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 device ex device ep device fe0 at isa? port 0x300 # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attatement needed # and resources will always be dynamically assigned by the pccard code. device wi # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those paremeters here. device an # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support #pseudo-device sl 1 # Kernel SLIP #pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif 4 # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf 4 #Berkeley packet filter #device miibus # MII bus support # USB support #device uhci # UHCI PCI->USB interface #device ohci # OHCI PCI->USB interface #device usb # USB Bus (required) #device ugen # Generic #device uhid # "Human Interface Devices" #device ukbd # Keyboard #device ulpt # Printer #device umass # Disks/Mass storage - Requires scbus and da #device ums # Mouse #device uscanner # Scanners # USB Ethernet, requires mii #device aue # ADMtek USB ethernet #device cue # CATC USB ethernet #device kue # Kawasaki LSI USB ethernet To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200102030219.SAA15733>