Date: Mon, 05 Apr 2004 23:23:29 +0500 From: Vahan Yerkanian <vahan@arminco.com> To: freebsd-scsi@freebsd.org Subject: current state of ahd driver Message-ID: <4071A421.4020507@arminco.com>
next in thread | raw e-mail | index | archive | help
Hi all, After thoroughly searching the archives and still loosing hair at fast speed with trying to make aic7902 work on a supermicro dual p4 motherboard with scsi320 hard drives I decided to ask for help here. What is official status of ahd driver at the moment? 4.9 and 5.2.1 still have the same dump messages on bootup for me. Are there any workarounds? any custom drivers? regards, Vahan ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x4800-0x48ff,0x4c00-0x4cff mem 0xfc402000-0xfc40 3fff irq 11 at device 2.1 on pci6 aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs [snip] ahd1: PCI error Interrupt >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< ahd1: Dumping Card State at program address 0x94 Mode 0x22 Card was paused HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0] DFFSTAT[0x30]:(CURRFIFO_0|FIFO0FREE|FIFO1FREE) SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x10]:(FASTMODE) SEQINTCTL[0x80]:(INTVEC1DSL) SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0 qinstart = 0 qinfifonext = 0 QINFIFO: WAITING_TID_QUEUES: Pending list: Total 0 Kernel Free SCB list: 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) ahd1: FIFO1 Free, LONGJMP == 0x8072, SCB 0x0 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x42 ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 SIMODE0[0x6c]:(ENOVERRUN|ENIOERR|ENSELDI|ENSELDO) CCSCBCTL[0x0] ahd1: REG0 == 0x39, SINDEX = 0x33, DINDEX = 0x0 ahd1: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0 CDB 0 0 0 0 0 0 STACK: 0x1 0x8 0x7 0x6 0x5 0x4 0x3 0x29 >>>>>>>>>>>>>>>>> ahd1: Signaled Target Abort
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4071A421.4020507>