Date: Tue, 01 Mar 2011 21:32:58 -0500 From: Mike Tancsa <mike@sentex.net> To: Jeremy Chadwick <freebsd@jdc.parodius.com> Cc: FreeBSD-STABLE Mailing List <freebsd-stable@freebsd.org> Subject: Re: CPU0: local APIC error 0x40 CPU1: local APIC error 0x40 Message-ID: <4D6DAC5A.6080904@sentex.net> In-Reply-To: <20110302020412.GA50962@icarus.home.lan> References: <4D6DA259.4050307@sentex.net> <20110302020412.GA50962@icarus.home.lan>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------000907060408030108000302 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit On 3/1/2011 9:04 PM, Jeremy Chadwick wrote: > On Tue, Mar 01, 2011 at 08:50:17PM -0500, Mike Tancsa wrote: >> I had a machine deadlock just now and the only thing on the serial >> console was >> >> CPU0: local APIC error 0x40 >> CPU1: local APIC error 0x40 > > The error in question I'm not familiar with, but the code in > src/sys/x86/x86/local_apic.c indicates that 0x40 is the contents of the > LAPIC ESR (error status register). > > Please provide full output from a verbose boot. Attached as a .txt file -- ------------------- Mike Tancsa, tel +1 519 651 3400 Sentex Communications, mike@sentex.net Providing Internet services since 1994 www.sentex.net Cambridge, Ontario Canada http://www.tancsa.com/ --------------000907060408030108000302 Content-Type: text/plain; name="dmesg.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg.txt" Preloaded elf kernel "/boot/kernel/kernel" at 0xc0af0000. Preloaded elf module "/boot/kernel/if_disc.ko" at 0xc0af01b0. Preloaded elf module "/boot/kernel/coretemp.ko" at 0xc0af025c. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2128015344 Hz CPU: Intel(R) Xeon(R) CPU 3050 @ 2.13GHz (2128.02-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6f6 Family = 6 Model = f Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100000<NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries 2nd-level cache: 2-MB, 8-way set associative, 64-byte line size 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size L2 cache: 2048 kbytes, 8-way associative, 64 bytes/line real memory = 4294967296 (4096 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c26000 - 0x00000000dbf7ffff, 3677724672 bytes (897882 pages) avail memory = 3676545024 (3506 MB) Table 'FACP' at 0xdfee8e51 Table 'MCFG' at 0xdfee8ec5 Table 'APIC' at 0xdfee8f01 APIC: Found table at 0xdfee8f01 MP Configuration Table version 1.4 found at 0xc009d5a1 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 1: enabled SMP: Added CPU 1 (AP) ACPI APIC Table: <PTLTD APIC > INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00f5e90 bios32: Entry = 0xfd470 (c00fd470) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd470+0x29e pnpbios: Found PnP BIOS data at 0xc00f5ee0 pnpbios: Entry = f0000:b19b Rev = 1.0 Other BIOS signatures found: x86bios: IVT 0x000000-0x0004ff at 0xc0000000 x86bios: SSEG 0x010000-0x01ffff at 0xc6988000 x86bios: EBDA 0x09d000-0x09ffff at 0xc009d000 x86bios: ROM 0x0a0000-0x0effff at 0xc00a0000 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xf5e40 00014 (v00 PTLTD ) ACPI: RSDT 0xdfee25c4 0003C (v01 PTLTD RSDT 06040000 LTP 00000000) ACPI: FACP 0xdfee8e51 00074 (v01 INTEL 06040000 PTL 00000003) ACPI: DSDT 0xdfee39ec 05465 (v01 INTEL GLENWOOD 06040000 MSFT 0100000E) ACPI: FACS 0xdfee9fc0 00040 ACPI: MCFG 0xdfee8ec5 0003C (v01 PTLTD MCFG 06040000 LTP 00000000) ACPI: APIC 0xdfee8f01 00074 (v01 PTLTD ? APIC 06040000 LTP 00000000) ACPI: BOOT 0xdfee8f75 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) ACPI: ASF! 0xdfee8f9d 00063 (v32 CETP CETP 06040000 PTL 00000001) ACPI: SSDT 0xdfee2600 013EC (v01 PmRef CpuPm 00003000 INTL 20050228) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Found IO APIC ID 3, Interrupt 24 at 0xfec10000 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00000200 err: 0x000000f0 pmc: 0x00010400 nfslock: pseudo-device null: <null device, zero device> random: <entropy source, Software, Yarrow> io: <I/O> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled acpi0: <PTLTD RSDT> on motherboard PCIe: Memory Mapped configuration base @ 0xf0000000 pcibios: BIOS version 2.10 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xc6982000 pa 0x1000 ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode cpu1: <ACPI CPU> on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 10 11 14 15 Validation 0 11 N 0 3 10 11 14 15 After Disable 0 255 N 0 3 10 11 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 10 11 14 15 Validation 0 11 N 0 3 10 11 14 15 After Disable 0 255 N 0 3 10 11 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 10 11 14 15 Validation 0 255 N 0 3 10 11 14 15 After Disable 0 255 N 0 3 10 11 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 10 11 14 15 Validation 0 11 N 0 3 10 11 14 15 After Disable 0 255 N 0 3 10 11 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 10 11 14 15 Validation 0 255 N 0 3 10 11 14 15 After Disable 0 255 N 0 3 10 11 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 10 11 14 15 Validation 0 255 N 0 3 10 11 14 15 After Disable 0 255 N 0 3 10 11 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 10 11 14 15 Validation 0 255 N 0 3 10 11 14 15 After Disable 0 255 N 0 3 10 11 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 10 11 14 15 Validation 0 10 N 0 3 10 11 14 15 After Disable 0 255 N 0 3 10 11 14 15 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x2778, revid=0xc0 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2779, revid=0xc0 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x45 (17250 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x27d0, revid=0x01 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x27e0, revid=0x01 domain=0, bus=0, slot=28, func=4 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x27e2, revid=0x01 domain=0, bus=0, slot=28, func=5 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 16 found-> vendor=0x8086, dev=0x27c8, revid=0x01 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type I/O Port, range 32, base 0x3000, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3000 found-> vendor=0x8086, dev=0x27c9, revid=0x01 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type I/O Port, range 32, base 0x3020, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3020 found-> vendor=0x8086, dev=0x27ca, revid=0x01 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 map[20]: type I/O Port, range 32, base 0x3040, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3040 found-> vendor=0x8086, dev=0x27cb, revid=0x01 domain=0, bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[20]: type I/O Port, range 32, base 0x3060, size 5, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 16 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3060 found-> vendor=0x8086, dev=0x27cc, revid=0x01 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xe0000000, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xe0000000 found-> vendor=0x8086, dev=0x244e, revid=0xe1 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27b8, revid=0x01 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27c0, revid=0x01 domain=0, bus=0, slot=31, func=2 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 powerspec 2 supports D0 D3 current D0 map[20]: type I/O Port, range 32, base 0x30b0, size 4, enabled found-> vendor=0x8086, dev=0x27da, revid=0x01 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0101, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type I/O Port, range 32, base 0x1100, size 5, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: no prefetched decode pci1: <ACPI PCI bus> on pcib1 pci1: domain=0, physical bus=1 pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pcib2: domain 0 pcib2: secondary bus 9 pcib2: subordinate bus 10 pcib2: I/O decode 0x4000-0x4fff pcib2: memory decode 0xe0100000-0xe02fffff pcib2: no prefetched decode pci9: <ACPI PCI bus> on pcib2 pci9: domain=0, physical bus=9 found-> vendor=0x8086, dev=0x032c, revid=0x09 domain=0, bus=9, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit found-> vendor=0x8086, dev=0x0326, revid=0x09 domain=0, bus=9, slot=0, func=1 class=08-00-20, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xe0100000, size 12, enabled pcib2: requested memory range 0xe0100000-0xe0100fff: good pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci9 pcib3: domain 0 pcib3: secondary bus 10 pcib3: subordinate bus 10 pcib3: I/O decode 0x4000-0x4fff pcib3: memory decode 0xe0200000-0xe02fffff pcib3: no prefetched decode pci10: <ACPI PCI bus> on pcib3 pci10: domain=0, physical bus=10 found-> vendor=0x8086, dev=0x1079, revid=0x03 domain=0, bus=10, slot=1, func=0 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x34 (1560 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xe0240000, size 17, enabled pcib3: requested memory range 0xe0240000-0xe025ffff: good pcib2: requested memory range 0xe0240000-0xe025ffff: good map[18]: type Memory, range 64, base 0xe0200000, size 18, enabled pcib3: requested memory range 0xe0200000-0xe023ffff: good pcib2: requested memory range 0xe0200000-0xe023ffff: good map[20]: type I/O Port, range 32, base 0x4000, size 6, enabled pcib3: requested I/O range 0x4000-0x403f: in range pcib2: requested I/O range 0x4000-0x403f: in range pcib3: matched entry for 10.1.INTA pcib3: slot 1 INTA hardwired to IRQ 24 found-> vendor=0x8086, dev=0x1079, revid=0x03 domain=0, bus=10, slot=1, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x34 (1560 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xe0260000, size 17, enabled pcib3: requested memory range 0xe0260000-0xe027ffff: good pcib2: requested memory range 0xe0260000-0xe027ffff: good map[18]: type Memory, range 64, base 0xe0280000, size 18, enabled pcib3: requested memory range 0xe0280000-0xe02bffff: good pcib2: requested memory range 0xe0280000-0xe02bffff: good map[20]: type I/O Port, range 32, base 0x4040, size 6, enabled pcib3: requested I/O range 0x4040-0x407f: in range pcib2: requested I/O range 0x4040-0x407f: in range pcib3: matched entry for 10.1.INTB pcib3: slot 1 INTB hardwired to IRQ 25 em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.3> port 0x4000-0x403f mem 0xe0240000-0xe025ffff,0xe0200000-0xe023ffff irq 24 at device 1.0 on pci10 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xe0240000 em0: Reserved 0x40 bytes for rid 0x20 type 4 at 0x4000 ioapic1: routing intpin 0 (PCI IRQ 24) to lapic 0 vector 49 em0: [FILTER] em0: bpf attached em0: Ethernet address: 00:1b:21:08:32:a8 em1: <Intel(R) PRO/1000 Legacy Network Connection 1.0.3> port 0x4040-0x407f mem 0xe0260000-0xe027ffff,0xe0280000-0xe02bffff irq 25 at device 1.1 on pci10 em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xe0260000 em1: Reserved 0x40 bytes for rid 0x20 type 4 at 0x4040 ioapic1: routing intpin 1 (PCI IRQ 25) to lapic 0 vector 50 em1: [FILTER] em1: bpf attached em1: Ethernet address: 00:1b:21:08:32:a9 pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 pcib4: domain 0 pcib4: secondary bus 13 pcib4: subordinate bus 13 pcib4: I/O decode 0x5000-0x5fff pcib4: memory decode 0xe0300000-0xe03fffff pcib4: no prefetched decode pci13: <ACPI PCI bus> on pcib4 pci13: domain=0, physical bus=13 found-> vendor=0x8086, dev=0x108c, revid=0x03 domain=0, bus=13, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xe0300000, size 17, enabled pcib4: requested memory range 0xe0300000-0xe031ffff: good map[18]: type I/O Port, range 32, base 0x5000, size 5, enabled pcib4: requested I/O range 0x5000-0x501f: in range pcib4: matched entry for 13.0.INTA pcib4: slot 0 INTA hardwired to IRQ 16 em2: <Intel(R) PRO/1000 Network Connection 7.1.9> port 0x5000-0x501f mem 0xe0300000-0xe031ffff irq 16 at device 0.0 on pci13 em2: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xe0300000 em2: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 51 em2: using IRQ 256 for MSI em2: Using an MSI interrupt em2: [FILTER] em2: bpf attached em2: Ethernet address: 00:30:48:8d:ba:50 pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 pcib5: domain 0 pcib5: secondary bus 14 pcib5: subordinate bus 14 pcib5: I/O decode 0x6000-0x6fff pcib5: memory decode 0xe0400000-0xe04fffff pcib5: no prefetched decode pci14: <ACPI PCI bus> on pcib5 pci14: domain=0, physical bus=14 found-> vendor=0x8086, dev=0x109a, revid=0x00 domain=0, bus=14, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xe0400000, size 17, enabled pcib5: requested memory range 0xe0400000-0xe041ffff: good map[18]: type I/O Port, range 32, base 0x6000, size 5, enabled pcib5: requested I/O range 0x6000-0x601f: in range pcib5: matched entry for 14.0.INTA pcib5: slot 0 INTA hardwired to IRQ 17 em3: <Intel(R) PRO/1000 Network Connection 7.1.9> port 0x6000-0x601f mem 0xe0400000-0xe041ffff irq 17 at device 0.0 on pci14 em3: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xe0400000 em3: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 257 to local APIC 0 vector 52 em3: using IRQ 257 for MSI em3: Using an MSI interrupt em3: [FILTER] em3: bpf attached em3: Ethernet address: 00:30:48:8d:ba:51 uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x3000-0x301f irq 23 at device 29.0 on pci0 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 53 uhci0: [MPSAFE] uhci0: [ITHREAD] usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0 uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x3020-0x303f irq 19 at device 29.1 on pci0 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 54 uhci1: [MPSAFE] uhci1: [ITHREAD] usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1 uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x3040-0x305f irq 18 at device 29.2 on pci0 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 55 uhci2: [MPSAFE] uhci2: [ITHREAD] usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2 uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x3060-0x307f irq 16 at device 29.3 on pci0 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 56 uhci3: [MPSAFE] uhci3: [ITHREAD] usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3 ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xe0000000-0xe00003ff irq 23 at device 29.7 on pci0 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus4: EHCI version 1.0 usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib6: domain 0 pcib6: secondary bus 15 pcib6: subordinate bus 15 pcib6: I/O decode 0x7000-0x7fff pcib6: memory decode 0xe0500000-0xe05fffff pcib6: prefetched decode 0xe8000000-0xefffffff pcib6: Subtractively decoded bridge. pci15: <ACPI PCI bus> on pcib6 pci15: domain=0, physical bus=15 found-> vendor=0x1002, dev=0x515e, revid=0x02 domain=0, bus=15, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0387, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xe8000000, size 27, enabled pcib6: requested memory range 0xe8000000-0xefffffff: good map[14]: type I/O Port, range 32, base 0x7000, size 8, enabled pcib6: requested I/O range 0x7000-0x70ff: in range map[18]: type Memory, range 32, base 0xe0500000, size 16, enabled pcib6: requested memory range 0xe0500000-0xe050ffff: good pcib6: matched entry for 15.0.INTA pcib6: slot 0 INTA hardwired to IRQ 16 vgapci0: <VGA-compatible display> port 0x7000-0x70ff mem 0xe8000000-0xefffffff,0xe0500000-0xe050ffff irq 16 at device 0.0 on pci15 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH7 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30b0-0x30bf at device 31.2 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x30b0 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 57 ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1: stat0=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x10000 ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 58 ata1: [MPSAFE] ata1: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Power Button> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 59 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0067 psm0: failed to reset the aux device. uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 60 uart0: [FILTER] uart0: fast interrupt uart0: console (115200,n,8,1) uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 61 uart1: [FILTER] uart1: fast interrupt fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 0 vector 62 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: using extended I/O port range ppc0: SPP ECP ECP+EPP ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 0 vector 63 ppc0: [MPSAFE] ppc0: [ITHREAD] ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: [MPSAFE] lpt0: [ITHREAD] lpt0: Interrupt-driven port pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete isa_probe_children: disabling PnP devices pmtimer0 on isa0 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart0 already exists; skipping it uart: uart1 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices coretemp0: <CPU On-Die Thermal Sensors> on cpu0 coretemp0: Setting TjMax=85 est0: enabling SpeedStep est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 828082806000828 device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 coretemp1: Setting TjMax=85 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 828082806000828 device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 Device configuration finished. procfs registered lapic: Divisor 2, Frequency 133000964 Hz Timecounter "TSC" frequency 2128015344 Hz quality -100 Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached ata0: Identifying devices: 00000001 ata0: New devices: 00000001 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad0: setting UDMA100 ad0: 239429MB <WDC WD2502ABYS-02B7A0 02.03B03> at ata0-master UDMA100 SATA ad0: 490350672 sectors [486459C/16H/63S] 16 sectors/interrupt 1 depth queue ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 ad0: Intel check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ata1: Identifying devices: 00010000 ata1: New devices: 00010000 ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: setting UDMA33 acd0: <CD-224E-N/1.AA> CDROM drive at ata1 as master acd0: read 4134KB/s (4134KB/s), 256KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 1 vector 48 ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 1 vector 49 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 50 ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 1 vector 51 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 1 vector 52 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 1 vector 53 ioapic1: routing intpin 1 (PCI IRQ 25) to lapic 1 vector 54 msi: Assigning MSI IRQ 257 to local APIC 1 vector 55 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered GEOM: new disk ad0 Root mount waiting for: usbus4 Root mount waiting for: usbus4 uhub4: 8 ports with 8 removable, self powered Trying to mount root from ufs:/dev/ad0s1a start_init: trying /sbin/init disc0: bpf attached em0: Link is up 1000 Mbps Full Duplex em1: Link is up 1000 Mbps Full Duplex ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging disabled ipfw0: bpf attached --------------000907060408030108000302--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4D6DAC5A.6080904>