Date: Tue, 07 Nov 2006 13:48:36 -0500 From: Michael Butler <imb@protected-networks.net> To: Bruno Ducrot <ducrot@poupinou.org> Cc: freebsd-stable@freebsd.org, Ian Smith <smithi@nimnet.asn.au>, Michel Talon <talon@lpthe.jussieu.fr> Subject: Re: Problem with the installer sysinstall. Message-ID: <4550D504.3080300@protected-networks.net> In-Reply-To: <20061107180016.GG4945@poupinou.org> References: <20061102134938.GA64052@lpthe.jussieu.fr> <Pine.BSF.3.96.1061103012515.3812x-100000@gaia.nimnet.asn.au> <20061107180016.GG4945@poupinou.org>
next in thread | previous in thread | raw e-mail | index | archive | help
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Bruno Ducrot wrote:
>> > cpu0: <ACPI CPU> on acpi0
>> > acpi_perf0: <ACPI CPU Frequency Control> on cpu0
>> > acpi_throttle0: <ACPI CPU Throttling> on cpu0
>> > cpu1: <ACPI CPU> on acpi0
>> > acpi_throttle1: <ACPI CPU Throttling> on cpu1
>> > acpi_throttle1: failed to attach P_CNT
>> > device_attach: acpi_throttle1 attach returned 6
>
> Anyway the OP should enable eist and p4tcc (by loading cpufreq on boot)
> and both acpi_perf and acpi_throttle will be gone.
Adding 'device cpufreq' results in dmesg looking like ..
acpi0: <TOSINV Capell00> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler
ACPI-1304: *** Error: Method execution failed
[\\_SB_.PCI0.PCIB.DOCK._STA] (Node 0xc64090e0), AE_NOT_EXIST
ACPI-0239: *** Error: Method execution failed
[\\_SB_.PCI0.PCIB.DOCK._STA] (Node 0xc64090e0), AE_NOT_EXIST
ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler
ACPI-1304: *** Error: Method execution failed
[\\_SB_.PCI0.PCIB.DOCK._STA] (Node 0xc64090e0), AE_NOT_EXIST
ACPI-0239: *** Error: Method execution failed
[\\_SB_.PCI0.PCIB.DOCK._STA] (Node 0xc64090e0), AE_NOT_EXIST
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
acpi_lid0: <Control Method Lid Switch> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82945GM (945GM GMCH) SVGA controller> port 0x1800-0x1807
mem 0xdc100000-0xdc17ffff,0xc0000000-0xcfffffff,0xdc200000-0xdc23ffff
irq 16 at device 2.0 on pci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
drmsub0: <Intel i945GM>: (child of agp_i810.c) on agp0
info: [drm] AGP at 0xdc100000 0MB
info: [drm] Initialized i915 1.4.0 20060119
pci0: <display> at device 2.1 (no driver attached)
pcm0: <Intel 82801G High Definition Audio Controller> mem
0xdc240000-0xdc243fff irq 22 at device 27.0 on pci0
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (FreeBSD)
iD8DBQFFUNUEQv9rrgRC1JIRAnolAJwPDqa1scbzwa/zLHU3SQeenV68XgCdEyad
gGPXRIJKkx2Hc6ZWyi/tX1g=
=fkpm
-----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4550D504.3080300>