Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 23 Jun 2015 09:48:58 -0600 (MDT)
From:      Warren Block <wblock@wonkity.com>
To:        Matthew Seaman <matthew@freebsd.org>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: getting ports updated on an older FreeBSD (5.1)
Message-ID:  <alpine.BSF.2.20.1506230942420.32372@wonkity.com>
In-Reply-To: <558917BC.30804@freebsd.org>
References:  <5587E158.2020702@physik.rwth-aachen.de> <20150622160929.GC92373@ozzmosis.com> <558911D3.4030109@physik.rwth-aachen.de> <558917BC.30804@freebsd.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 23 Jun 2015, Matthew Seaman wrote:

> On 06/23/15 08:59, Christoph Kukulies wrote:
>> Although you may be right with regard to obsoleteness of 5.0.0 and my
>> 5.1 version in general,
>> I'm wondering whether it would be possible to
>> run a 10.1 executable under 5.1 (possible link it statically?).
>
> 5.1 Release happened during a particularly difficult period for FreeBSD
> development. As I recall, it was quite quickly superseded by 5.2 release
> due to technical inadequacies, and it wasn't until the 6.x series that
> FreeBSD really got back on track.
>
>> At the moment I'm urgently in need to update an intranet forum (pbpBB3) to
>> a 3.1.5 version and this requires a newer (>= 5.3.3) version of php.
>
> Your quickest and most reliable way forward is to upgrade your FreeBSD
> box to something supported.  Given you're starting from such an old
> base, the way I'd approach this is to buy a new hard drive, install it
> in parallel with your old drive (if possible) and then create a new
> install of FreeBSD 10.1, install all the software you need and migrate
> over the configurations, passwd file etc. from the old system.

Agreed, except I would suggest a completely separate computer for the 
new install.  Old stuff that has been running for years can be fragile. 
Moving a cable that has been motionless for years can make it fail, and 
it's somehow a given that these systems are never backed up.

Given the age of the 5.1 system, replacement hardware is probably easily 
available (free), or a VM can be used.  The old system can be imaged 
onto a second drive or partition on the new system for convenience of 
copying configurations, or just copy them from the live old system with 
rsync or scp.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?alpine.BSF.2.20.1506230942420.32372>