Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 18 Nov 2000 19:47:27 -0800 (PST)
From:      Bill Woods <bwoods2@uswest.net>
To:        freebsd-questions@freebsd.org
Subject:   Bridging...
Message-ID:  <Pine.BSF.4.21.0011181942100.1246-100000@alpha.gplsucks.org>

next in thread | raw e-mail | index | archive | help
It looks like I am going to have to do some bridging of ethernet cards in
4.2-BETA, so what I need to know are a few things....

In rc.conf where I set up ethernet cards, this is what I have now..

ifconfig_ep0="inet 63.227.213.93  netmask 255.255.255.248"
ifconfig_ep1="inet 10.0.0.99  netmask 255.255.255.255" 

ep0 conects to the world 
ep1 connects to my internal lan

Since I am going to be bridging the two cards as one, what settings do I
use. I looked in the handbook, but its not that clear to me.
 
Also, does ipf work with bridging ethernet cards or do I need to go to
ipfw?

Also, the cards are:

ep0: <3Com 3C509-TPO EtherLink III> at port 0x210-0x21f irq 7 on isa0
ep0: Ethernet address 00:a0:24:31:de:03
ep1: <3Com 3C509-TPO EtherLink III> at port 0x300-0x30f irq 10 on isa0
ep1: Ethernet address 00:a0:24:9b:99:d8

Will these cards work in bridging mode?
 
any oither helpfull hints?

Thanks



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0011181942100.1246-100000>