Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 9 Dec 2013 11:33:45 +0000 (UTC)
From:      Luiz Otavio O Souza <loos@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org
Subject:   svn commit: r259125 - head/sys/arm/ti/am335x
Message-ID:  <201312091133.rB9BXjjp068145@svn.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: loos
Date: Mon Dec  9 11:33:45 2013
New Revision: 259125
URL: http://svnweb.freebsd.org/changeset/base/259125

Log:
  Fix a few typos on the scm (control module) pin mux definitions.
  
  Approved by:	adrian (mentor)

Modified:
  head/sys/arm/ti/am335x/am335x_scm_padconf.c

Modified: head/sys/arm/ti/am335x/am335x_scm_padconf.c
==============================================================================
--- head/sys/arm/ti/am335x/am335x_scm_padconf.c	Mon Dec  9 08:39:33 2013	(r259124)
+++ head/sys/arm/ti/am335x/am335x_scm_padconf.c	Mon Dec  9 11:33:45 2013	(r259125)
@@ -170,8 +170,8 @@ const struct ti_scm_padconf ti_padconf_d
 	_PIN(0x948, "MDIO",		0, 7, "mdio_data", "timer6", "uart5_rxd", "uart3_ctsn", "mmc0_sdcd","mmc1_cmd", "mmc2_cmd","gpio0_0"),
 	_PIN(0x94c, "MDC",		1, 7, "mdio_clk", "timer5", "uart5_txd", "uart3_rtsn", "mmc0_sdwp", "mmc1_clk", "mmc2_clk", "gpio0_1"),
 	_PIN(0x950, "SPI0_SCLK",	2, 7, "spi0_sclk", "uart2_rxd", "I2C2_SDA", "ehrpwm0A", "pr1_uart0_cts_n", "pr1_edio_sof", "EMU2", "gpio0_2"),
-	_PIN(0x954, "SPI0_D0",		3, 7, "spi0_d0", "uart2_txd", "i2C2_SCL", "ehrpwm0B", "pr1_uart0_rts_n", "pr1_edio_latch_in", "EMU3", "gpio0_3"),
-	_PIN(0x958, "SPIO_D1",		4, 7, "spi0_d1", "mmc1_sdwp", "I2C1_SDA", "ehrpwm0_tripzone_input", "pr1_uart0_rxd", "pr1_edio_data_in0", "pr1_edio_data_out0", "gpio0_4"),
+	_PIN(0x954, "SPI0_D0",		3, 7, "spi0_d0", "uart2_txd", "I2C2_SCL", "ehrpwm0B", "pr1_uart0_rts_n", "pr1_edio_latch_in", "EMU3", "gpio0_3"),
+	_PIN(0x958, "SPI0_D1",		4, 7, "spi0_d1", "mmc1_sdwp", "I2C1_SDA", "ehrpwm0_tripzone_input", "pr1_uart0_rxd", "pr1_edio_data_in0", "pr1_edio_data_out0", "gpio0_4"),
 	_PIN(0x95c, "SPI0_CS0",		5, 7, "spi0_cs0", "mmc2_sdwp", "I2C1_SCL", "ehrpwm0_synci", "pr1_uart0_txd", "pr1_edio_data_in1", "pr1_edio_data_out1", "gpio0_5"),
 	_PIN(0x960, "SPI0_CS1",		6, 7, "spi0_cs1", "uart3_rxd", "eCAP1_in_PWM1_out", "mcc0_pow", "xdm_event_intr2", "mmc0_sdcd", "EMU4", "gpio0_6"),
 	_PIN(0x964, "ECAP0_IN_PWM0_OUT",7, 7, "eCAP0_in_PWM0_out", "uart3_txd", "spi1_cs1", "pr1_ecap0_ecap_capin_apwm_o", "spi1_sclk", "mmc0_sdwp", "xdma_event_intr2", "gpio0_7"),
@@ -180,7 +180,7 @@ const struct ti_scm_padconf ti_padconf_d
 	_PIN(0x970, "UART0_rxd",	42, 7, "uart0_rxd", "spi1_cs0", "dcan0_tx", "I2C2_SDA", "eCAP2_in_PWM2_out", "pr1_pru1_pru_r30_14", "pr1_pru1_pru_r31_14", "gpio1_10"),
 	_PIN(0x974, "UART0_txd",	43, 7, "uart0_txd", "spi1_cs1", "dcan0_rx", "I2C2_SCL", "eCAP1_in_PWM1_out", "pr1_pru1_pru_r30_15", "pr1_pru1_pru_r31_15", "gpio1_11"),
 	_PIN(0x978, "UART1_CTSn",	12, 7, "uart1_ctsn", "timer6_mux1", "dcan0_tx", "I2C2_SDA", "spi1_cs0", "pr1_uart0_cts_n", "pr1_edc_latch0_in", "gpio0_12"),
-	_PIN(0x97c, "UART1_RTSn",	13, 7, "uart1_rtsn", "timer5_mux1", "dcan0_rx", "I2C2_SCL", "spi1_cs1", "pr1_uart0_rts_n	", "pr1_edc_latch1_in", "gpio0_13"),
+	_PIN(0x97c, "UART1_RTSn",	13, 7, "uart1_rtsn", "timer5_mux1", "dcan0_rx", "I2C2_SCL", "spi1_cs1", "pr1_uart0_rts_n", "pr1_edc_latch1_in", "gpio0_13"),
 	_PIN(0x980, "UART1_RXD",	14, 7, "uart1_rxd", "mmc1_sdwp", "dcan1_tx", "I2C1_SDA", NULL, "pr1_uart0_rxd", "pr1_pru1_pru_r31_16", "gpio0_14"),
 	_PIN(0x984, "UART1_TXD",	15, 7, "uart1_txd", "mmc2_sdwp", "dcan1_rx", "I2C1_SCL", NULL, "pr1_uart0_txd", "pr1_pru0_pru_r31_16", "gpio0_15"),
 	_PIN(0x988, "I2C0_SDA",		101, 7, "I2C0_SDA", "timer4", "uart2_ctsn", "eCAP2_in_PWM2_out", NULL, NULL, NULL, "gpio3_5"),



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201312091133.rB9BXjjp068145>