Date: Tue, 07 Nov 2000 07:48:55 +1100 From: Mark.Andrews@nominum.com To: stable@freebsd.org Subject: 4.2-BETA + Dell Inspiron 3800 + 3CEX589ET Message-ID: <200011062049.eA6Kmtv09460@drugs.dv.isc.org>
next in thread | raw e-mail | index | archive | help
The above configuration locks up w/ GENERIC. I needed specify
a irq (10) to get the kernel to boot. If the 3CEX589ET is
removed the system will boot.
Mark
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-BETA #0: Mon Nov 6 22:50:10 EST 2000
root@drugs.dv.isc.org:/usr/obj/usr/src/sys/DRUGS
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (498.47-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 134152192 (131008K bytes)
config> di sn0
config> di lnc0
config> di le0
No such device: le0
Invalid command or syntax. Type `?' for help.
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> q
avail memory = 126029824 (123076K bytes)
Preloaded elf kernel "kernel" at 0xc047e000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc047e09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 11
pcic-pci0: <TI PCI-1225 PCI-CardBus Bridge> irq 11 at device 3.0 on pci0
pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][FUNC pci int + CSC serial isa irq]
pcic-pci1: <TI PCI-1225 PCI-CardBus Bridge> irq 11 at device 3.1 on pci0
pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][FUNC pci int + CSC serial isa irq]
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x860-0x86f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xdce0-0xdcff irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x840-0x84f at device 7.3 on pci0
pci0: <unknown card> (vendor=0x125d, dev=0x1998) at 8.0 irq 5
pci0: <unknown card> (vendor=0x125d, dev=0x1999) at 8.1 irq 5
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
pcic0: management irq 10
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 11513MB <IBM-DARA-212000> [23392/16/63] at ata0-master UDMA33
acd0: CDROM <TOSHIBA CD-ROM XM-7002B> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s3a
pccard: card inserted, slot 1
IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to deny, unlimited logging
ep0: <3Com Etherlink III 3C589> at port 0x240-0x24f irq 3 slot 1 on pccard1
ep0: Ethernet address 00:00:86:58:3f:e8
ep0: detached
stray irq 3
pccard: card disabled, slot 1
resumed from suspended mode (slept 00:00:31)
pccard: card inserted, slot 1
ata0: resetting devices .. done
ata1: resetting devices .. done
ep0: <3Com Etherlink III 3C589> at port 0x240-0x24f irq 3 slot 1 on pccard1
ep0: Ethernet address 00:00:86:58:3f:e8
pid 149 (named), uid 0: exited on signal 6 (core dumped)
ipfw: 800 Deny TCP 130.104.1.5:64436 130.155.191.236:113 in via ep0
ipfw: 800 Deny TCP 130.104.1.5:64436 130.155.191.236:113 in via ep0
ipfw: 800 Deny TCP 130.104.1.5:64436 130.155.191.236:113 in via ep0
ipfw: 800 Deny TCP 130.104.1.5:64436 130.155.191.236:113 in via ep0
--
Mark Andrews, Nominum Inc.
1 Seymour St., Dundas Valley, NSW 2117, Australia
PHONE: +61 2 9871 4742 INTERNET: Mark.Andrews@nominum.com
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200011062049.eA6Kmtv09460>