Date: Tue, 18 Nov 2014 09:40:29 +0000 From: Steven Hartland <killing@multiplay.co.uk> To: Michael Richter <MRichter@sasag.ch>, "freebsd-stable@freebsd.org" <freebsd-stable@freebsd.org>, achim@freebsd.org Subject: Re: AW: aacraid drives missing after update 10.0 -> 10.1 ? Message-ID: <546B140D.5010103@multiplay.co.uk> In-Reply-To: <6A1B0F2AE603944A84F7F99010C3036986911416@VS-W08-KEWV-EXC.sasag.intra> References: <6A1B0F2AE603944A84F7F99010C303698691138F@VS-W08-KEWV-EXC.sasag.intra>, <546A5521.7080302@multiplay.co.uk> <6A1B0F2AE603944A84F7F99010C3036986911416@VS-W08-KEWV-EXC.sasag.intra>
next in thread | previous in thread | raw e-mail | index | archive | help
So as I suspected the drivers are flagged as a log device but the controller doesn't have bit 4 set on its hint_flags. Out of interest does the controller have a bios / firmware level option to expose the disks as JBOD or similar? @achim do you have any tech specs with regards these bits? Regards Steve On 17/11/2014 22:40, Michael Richter wrote: > Here the output from dmesg: > > aacraid0: hint_flags: 0x00000000, data_ptr[0]: 0x20 > aacraid0: hint_flags: 0x00000000, data_ptr[0]: 0x20 > aacraid0: hint_flags: 0x00000000, data_ptr[0]: 0x20 > aacraid0: hint_flags: 0x00000000, data_ptr[0]: 0x20 > aacraid0: hint_flags: 0x00000000, data_ptr[0]: 0x20 > aacraid0: hint_flags: 0x00000000, data_ptr[0]: 0x20 > aacraid0: hint_flags: 0x00000000, data_ptr[0]: 0x20 > aacraid0: hint_flags: 0x00000000, data_ptr[0]: 0x20 > aacraid0: hint_flags: 0x00000000, data_ptr[0]: 0x20 > aacraid0: hint_flags: 0x00000000, data_ptr[0]: 0x20 > aacraid0: hint_flags: 0x00000000, data_ptr[0]: 0x20 > aacraid0: hint_flags: 0x00000000, data_ptr[0]: 0x20 > aacraid0: hint_flags: 0x00000000, data_ptr[0]: 0x20 > aacraid0: hint_flags: 0x00000000, data_ptr[0]: 0x20 > aacraid0: hint_flags: 0x00000000, data_ptr[0]: 0x20 > aacraid0: hint_flags: 0x00000000, data_ptr[0]: 0x20 > > > > ________________________________________ > Von: Steven Hartland [killing@multiplay.co.uk] > Gesendet: Montag, 17. November 2014 21:05 > An: Michael Richter; freebsd-stable@freebsd.org; achim@freebsd.org > Betreff: Re: aacraid drives missing after update 10.0 -> 10.1 ? > > On 17/11/2014 19:39, Michael Richter wrote: >> I had the same issue after the upgrade. >> >> @Steve >> Thanks I have changed the aacraid_cam.c and then it was working again >> > So I'm guessing that for some reason sc->hint_flags doesn't include bit > 4 for your controller. > > Could you add the following where that code was removed from so we can > see what your device has: > device_printf(sc->aac_dev, "hint_flags: 0x%08x, data_ptr[0]: 0x%02x\n", > sc->hint_flags, ccb->csio.data_ptr[0]); > > @achim: Are there any other details which would aid in debugging this? > > Regards > Steve
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?546B140D.5010103>