Date: Mon, 6 May 2002 23:46:38 -0700 From: "VVI hostmaster" <xavier@vvi.at> To: "'VVI hostmaster'" <xavier@vvi.at>, "'Joe Marcus Clarke'" <marcus@marcuscom.com> Cc: <freebsd-gnome@FreeBSD.ORG> Subject: RE: FW: bonobo-1.0.18 gnomeprint-0.34 missing on ports and pkgs Message-ID: <003201c1f592$f3781c90$39e1fcd0@xavier2>
next in thread | raw e-mail | index | archive | help
Hi, Buzzing along on the compile and ran into another error Seems there is a problem with galeon from sourceforge or something like a patch or checksum check? ===> gnome-1.4.1b2_2 depends on executable: nautilus - not found ===> Verifying install for nautilus in /usr/ports/x11-fm/nautilus ===> Installing for nautilus-1.0.6_5 ===> nautilus-1.0.6_5 depends on file: /usr/X11R6/share/gnome/ui/nautilus-galeon-view-ui.xml - not found ===> Verifying install for /usr/X11R6/share/gnome/ui/nautilus-galeon-view-ui.xml in /usr/ports/www/galeon >> galeon-1.2.1.tar.gz doesn't seem to exist in /usr/ports/distfiles/. >> Attempting to fetch from http://prdownloads.sourceforge.net/galeon/. fetch: galeon-1.2.1.tar.gz: size of remote file is not known Receiving galeon-1.2.1.tar.gz: 8490 bytes 8490 bytes transferred in 0.1 seconds (145.47 kBps) ===> Extracting for galeon-1.2.1_1 >> Checksum mismatch for galeon-1.2.1.tar.gz. Make sure the Makefile and distinfo file (/usr/ports/www/galeon/distinfo) are up to date. If you are absolutely sure you want to override this check, type "make NO_CHECKSUM=yes [other args]". *** Error code 1 Stop in /usr/ports/www/galeon. *** Error code 1 Stop in /usr/ports/x11-fm/nautilus. *** Error code 1 Stop in /usr/ports/x11/gnome. Jason -----Original Message----- From: VVI hostmaster [mailto:xavier@vvi.at] Sent: Monday, May 06, 2002 11:12 PM To: 'Joe Marcus Clarke' Cc: 'freebsd-gnome@FreeBSD.ORG' Subject: RE: FW: bonobo-1.0.18 gnomeprint-0.34 missing on ports and pkgs Good news, /usr/ports/x11-toolkits/gnome-- installed without the patch-src_procbar.gen_h ;o) /usr/ports/x11/gnome/ has resumed make install by downloading natilus Jason -----Original Message----- From: Joe Marcus Clarke [mailto:marcus@marcuscom.com] Sent: Monday, May 06, 2002 11:05 PM To: VVI hostmaster Cc: freebsd-gnome@FreeBSD.ORG Subject: RE: FW: bonobo-1.0.18 gnomeprint-0.34 missing on ports and pkgs On Tue, 2002-05-07 at 02:54, VVI hostmaster wrote: > Joe, > > Thanks the file gzipped got it to start to compile, > > but it ended in the (procbar.cc:23: ANSI C++ prohibits conversion from > `(void *)' to `(...)') error again Can you remove the patch altogether (i.e. no patch-src_procbar.gen_h), then clean and rebuild gnome--? Joe > > c++ -DHAVE_CONFIG_H -I. -I. -I../.. -DG_LOG_DOMAIN=\"Gnome--\" -I. > c++ -I./.. -I.. -I../../src -I../../src -I../../src/gtk-- -I../../gdk-- > -I/usr/X11R6/lib/gtkmm/include -I/usr/X11R6/include > -I/usr/X11R6/include/gtk12 -I/usr/local/include/glib12 > -I/usr/local/include -I/usr/X11R6/include/gnome-1.0 -I/usr/X11R6/include > -DNEED_GNOMESUPPORT_H -I/usr/X11R6/lib/gnome-libs/include > -I/usr/X11R6/include/gtk12 > -I/usr/local/include/glib12 -I/usr/local/include > -I/usr/X11R6/include/gnome-1.0 -I/usr/X11R6/include > -DNEED_GNOMESUPPORT_H -I/usr/X11R6/lib/gnome-libs/include > -I/usr/X11R6/include/gtk12 -I/usr/local/include/glib12 > -I/usr/local/include -O -pipe -Wall -Wno-unused -c procbar.cc -fPIC > -DPIC -o .libs/procbar.lo > procbar.cc: In method `Gnome::ProcBar::ProcBar(const Gtk::Label &, const > vector<Gdk_Color *,allocator<Gdk_Color *> > &, gint (*)(void *))': > procbar.cc:23: ANSI C++ prohibits conversion from `(void *)' to `(...)' > gmake[4]: *** [procbar.lo] Error 1 > gmake[4]: Leaving directory > `/usr/ports/x11-toolkits/gnome--/work/gnomemm-1.2.2/src/gnome--' > gmake[3]: *** [all-recursive] Error 1 > gmake[3]: Leaving directory > `/usr/ports/x11-toolkits/gnome--/work/gnomemm-1.2.2/src/gnome--' > gmake[2]: *** [all-recursive] Error 1 > gmake[2]: Leaving directory > `/usr/ports/x11-toolkits/gnome--/work/gnomemm-1.2.2/src' > gmake[1]: *** [all-recursive] Error 1 > gmake[1]: Leaving directory > `/usr/ports/x11-toolkits/gnome--/work/gnomemm-1.2.2'gmake: *** > [all-recursive-am] Error 2 > *** Error code 2 > > Stop in /usr/ports/x11-toolkits/gnome--. > > Jason > > -----Original Message----- > From: Joe Marcus Clarke [mailto:marcus@marcuscom.com] > Sent: Monday, May 06, 2002 10:43 PM > To: Charlie & > Cc: xavier@vvi.at > Subject: Re: FW: bonobo-1.0.18 gnomeprint-0.34 missing on ports and pkgs > > On Tue, 2002-05-07 at 01:37, Charlie & wrote: > > Hi marcus, > > > > Yikes =0 > > > > still the same error > > Okay, looks like your mailer is corrupting the patch. If you do a cksum > on the patch file, you should see: > > 3688557979 524 patch-src_procbar.gen_h > > I bet you don't. In any event, here is a gzip'd version of the patch. > Be sure if you're using a Windows mailer, you use binary transfers to > get this to your FreeBSD machine. > > Joe > > > > > ursula# make clean > > ===> Cleaning for esound-0.2.25 > > ===> Cleaning for gnomeaudio-1.4.0 > > ===> Cleaning for libaudiofile-0.2.3 > > ===> Cleaning for libiconv-1.7_4 > > ===> Cleaning for db3-3.2.9_3,1 > > ===> Cleaning for gdbm-1.8.0 > > ===> Cleaning for gnomedb-0.2.96_1 > > ===> Cleaning for libgda-0.2.96_1 > > ===> Cleaning for ORBit-0.5.15_1 > > ===> Cleaning for bison-1.35_1 > > ===> Cleaning for bonobo-1.0.20_2 > > ===> Cleaning for gconf-1.0.9 > > ===> Cleaning for gettext-0.11.1_2 > > ===> Cleaning for glib-1.2.10_5 > > ===> Cleaning for gmake-3.79.1_1 > > ===> Cleaning for gnomevfs-1.0.5_3 > > ===> Cleaning for imake-1.0 > > ===> Cleaning for libglade-0.17_2 > > ===> Cleaning for libgnugetopt-1.1 > > ===> Cleaning for libsigc++-1.0.3 > > ===> Cleaning for libtool-1.3.4_3 > > ===> Cleaning for libunicode-0.4_2 > > ===> Cleaning for m4-1.4_1 > > ===> Cleaning for oaf-0.6.10 > > ===> Cleaning for pkgconfig-0.12.0 > > ===> Cleaning for popt-1.5.1_1 > > ===> Cleaning for gdk-pixbuf-0.17.0 > > ===> Cleaning for gnomecanvas-0.17.0 > > ===> Cleaning for imlib-1.9.14_1 > > ===> Cleaning for jpeg-6b_1 > > ===> Cleaning for libungif-4.1.0b1 > > ===> Cleaning for png-1.2.2_1 > > ===> Cleaning for tiff-3.5.7 > > ===> Cleaning for xpm-3.4k > > ===> Cleaning for guile-1.4 > > ===> Cleaning for gnomemimedata-1.0.7 > > ===> Cleaning for freetype2-2.0.9 > > ===> Cleaning for ghostscript-gnu-7.05 > > ===> Cleaning for gnomeprint-0.35 > > ===> Cleaning for gnomecontrolcenter-1.4.0.5_1 > > ===> Cleaning for libxml-1.8.17_1 > > ===> Cleaning for pspell-0.12.2_1 > > ===> Cleaning for scrollkeeper-0.2_3 > > ===> Cleaning for glibwww-0.2_1 > > ===> Cleaning for gtkhtml-1.0.2_2 > > ===> Cleaning for libghttp-1.0.9 > > ===> Cleaning for libwww-5.3.2 > > ===> Cleaning for gal-0.19.2_1 > > ===> Cleaning for gtkmm-1.2.8 > > ===> Cleaning for gtk-1.2.10_4 > > ===> Cleaning for XFree86-3.3.6_11 > > ===> Cleaning for gnomecore-1.4.0.8_1 > > ===> Cleaning for gnomelibs-1.4.1.6_1 > > ===> Cleaning for gnomemm-1.2.2 > > ursula# make > > ===> Extracting for gnomemm-1.2.2 > > >> Checksum OK for gnomemm-1.2.2.tar.bz2. > > ===> gnomemm-1.2.2 depends on executable: m4 - found > > ===> gnomemm-1.2.2 depends on executable: gmake - found > > ===> gnomemm-1.2.2 depends on executable: libtool - found > > ===> gnomemm-1.2.2 depends on shared library: gtkmm.2 - found > > ===> gnomemm-1.2.2 depends on shared library: X11.6 - found > > ===> gnomemm-1.2.2 depends on shared library: esd.2 - found > > ===> gnomemm-1.2.2 depends on shared library: glib12.3 - found > > ===> gnomemm-1.2.2 depends on shared library: gtk12.2 - found > > ===> gnomemm-1.2.2 depends on shared library: Imlib.5 - found > > ===> gnomemm-1.2.2 depends on shared library: gnome.5 - found > > ===> gnomemm-1.2.2 depends on shared library: capplet.5 - found > > ===> gnomemm-1.2.2 depends on shared library: panel_applet.5 - found > > ===> Patching for gnomemm-1.2.2 > > ===> Applying FreeBSD patches for gnomemm-1.2.2 > > 2 out of 2 hunks failed--saving rejects to src/procbar.gen_h.rej > > >> Patch patch-src_procbar.gen_h failed to apply cleanly. > > >> Patch(es) patch-Makefile.in patch-aa applied cleanly. > > *** Error code 1 > > > > Stop in /usr/ports/x11-toolkits/gnome--. > > > > > > > > > > This is the content of the procbar.gen_h > > > > --- src/procbar.gen_h.orig Tue Apr 30 15:52:13 2002 > > +++ src/procbar.gen_h Tue Apr 30 15:52:25 2002 > > @@ -42,7 +42,7 @@ > > > > ProcBar(const Gtk::Label &label, > > const vector<Gdk_Color*> &colors, > > - gint (*cb)()); > > + gint (*cb)(void *)); > > > > void set_values (const vector<unsigned> &values); > > > > @@ -72,7 +72,7 @@ > > > > ProcBar::ProcBar(const Gtk::Label &label, > > const vector<Gdk_Color*> &colors, > > - gint (*cb)()) > > + gint (*cb)(void *)) > > : Gtk::HBox(GTK_HBOX(gtk_object_new(get_type(),0))), > > colors_(0) > > { > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Monday 06 May 2002 10:21 pm, VVI hostmaster wrote: > > > -----Original Message----- > > > From: Joe Marcus Clarke [mailto:marcus@marcuscom.com] > > > Sent: Monday, May 06, 2002 10:01 PM > > > To: VVI hostmaster > > > Subject: RE: bonobo-1.0.18 gnomeprint-0.34 missing on ports and pkgs > > > > > > On Tue, 2002-05-07 at 00:24, VVI hostmaster wrote: > > > > I think the attached patch did not make it ;o) > > > > > > Okay, one more try. > > > > > > Joe > > > > > > > -----Original Message----- > > > > From: Joe Clarke [mailto:marcus@marcuscom.com] > > > > Sent: Monday, May 06, 2002 8:19 PM > > > > To: VVI hostmaster > > > > Cc: freebsd-gnome@FreeBSD.ORG > > > > Subject: RE: bonobo-1.0.18 gnomeprint-0.34 missing on ports and > pkgs > > > > > > > > > > > > > > > > PGP Key : http://www.marcuscom.com/pgp.asc > > > > > > > > On Mon, 6 May 2002, VVI hostmaster wrote: > > > > > Hi, > > > > > > > > > > I got a "Patch failed to apply cleanly error" > > > > > > > > Hmmm...try this one. > > > > > > > > Joe > > > > > > > > > ursula# make > > > > > ===> Extracting for gnomemm-1.2.2 > > > > > > > > > > >> Checksum OK for gnomemm-1.2.2.tar.bz2. > > > > > > > > > > > ===> gnomemm-1.2.2 depends on executable: m4 - found > > > > > ===> gnomemm-1.2.2 depends on executable: gmake - found > > > > > ===> gnomemm-1.2.2 depends on executable: libtool - found > > > > > ===> gnomemm-1.2.2 depends on shared library: gtkmm.2 - found > > > > > ===> gnomemm-1.2.2 depends on shared library: X11.6 - found > > > > > ===> gnomemm-1.2.2 depends on shared library: esd.2 - found > > > > > ===> gnomemm-1.2.2 depends on shared library: glib12.3 - found > > > > > ===> gnomemm-1.2.2 depends on shared library: gtk12.2 - found > > > > > ===> gnomemm-1.2.2 depends on shared library: Imlib.5 - found > > > > > ===> gnomemm-1.2.2 depends on shared library: gnome.5 - found > > > > > ===> gnomemm-1.2.2 depends on shared library: capplet.5 - > found > > > > > ===> gnomemm-1.2.2 depends on shared library: panel_applet.5 - > > > > > > found > > > > > > > > ===> Patching for gnomemm-1.2.2 > > > > > ===> Applying FreeBSD patches for gnomemm-1.2.2 > > > > > 2 out of 2 hunks failed--saving rejects to src/procbar.gen_h.rej > > > > > > > > > > >> Patch patch-src_procbar.gen_h failed to apply cleanly. > > > > > >> Patch(es) patch-Makefile.in patch-aa applied cleanly. > > > > > > > > > > *** Error code 1 > > > > > > > > > > > > > > > > > > > > Here is > > > > > src/procbar.gen_h.rej > > > > > > > > > > *************** > > > > > *** 42,48 **** > > > > > > > > > > ProcBar(const Gtk::Label &label, > > > > > const vector<Gdk_Color*> &colors, > > > > > - gint (*cb)()); > > > > > > > > > > void set_values (const vector<unsigned> &values); > > > > > > > > > > --- 42,48 ---- > > > > > > > > > > ProcBar(const Gtk::Label &label, > > > > > const vector<Gdk_Color*> &colors, > > > > > + gint (*cb)(gpointer)); > > > > > > > > > > void set_values (const vector<unsigned> &values); > > > > > > > > > > *************** > > > > > *** 72,78 **** > > > > > > > > > > ProcBar::ProcBar(const Gtk::Label &label, > > > > > const vector<Gdk_Color*> &colors, > > > > > - gint (*cb)()) > > > > > > > > > > : Gtk::HBox(GTK_HBOX(gtk_object_new(get_type(),0))), > > > > > > > > > > colors_(0) > > > > > { > > > > > --- 72,78 ---- > > > > > > > > > > ProcBar::ProcBar(const Gtk::Label &label, > > > > > const vector<Gdk_Color*> &colors, > > > > > + gint (*cb)(gpointer)) > > > > > > > > > > : Gtk::HBox(GTK_HBOX(gtk_object_new(get_type(),0))), > > > > > > > > > > colors_(0) > > > > > { > > > > > > > > > > Thanks > > > > > Jason > > > > > > > > > > -----Original Message----- > > > > > From: Joe Marcus Clarke [mailto:marcus@marcuscom.com] > > > > > Sent: Monday, May 06, 2002 7:44 PM > > > > > To: VVI hostmaster > > > > > Cc: freebsd-gnome@FreeBSD.ORG > > > > > Subject: Re: bonobo-1.0.18 gnomeprint-0.34 missing on ports and > pkgs > > > > > > > > > > On Mon, 2002-05-06 at 23:31, Joe Marcus Clarke wrote: > > > > > > On Sun, 2001-05-06 at 22:33, VVI hostmaster wrote: > > > > > > > Hi thanks Joe for the reply. > > > > > > > > > > > > > > I have gotten far with the compile but I got stuck on > gnomemm > > > > > > > > > > > > > > If anyone has any ideas what is wrong please drop me a > message > > > > > > > > cause > > > > > > > > > I > > > > > > > > > > > > am not on the list. > > > > > > > > > > > > Take the attached patch, copy it to x11-toolkits/gnome--/files > > > > > > (overwriting the one currently there), then make clean in > gnome--, > > > > > > > > and > > > > > > > > > > try rebuilding. See if this corrects your build problem. > > > > > > > > > > Whoops, no patch. Try now. > > > > > > > > > > Joe > > > > > > > > > > > Joe > > > > > > > > > > > > > Best Regards, > > > > > > > Jason > > > > > > > > > > > > > > c++ -DHAVE_CONFIG_H -I. -I. -I../.. > -DG_LOG_DOMAIN=\"Gnome--\" > > > > > > -I. > > > > > > > > > > -I./.. -I.. -I../../src -I../../src -I../../src/gtk-- > > > > > > > > -I../../gdk-- > > > > > > > > > > > -I/usr/X11R6/lib/gtkmm/include -I/usr/X11R6/include > > > > > > > -I/usr/X11R6/include/gtk12 -I/usr/local/include/glib12 > > > > > > > -I/usr/local/include -I/usr/X11R6/include/gnome-1.0 > > > > > > > > > > -I/usr/X11R6/include > > > > > > > > > > > > -DNEED_GNOMESUPPORT_H -I/usr/X11R6/lib/gnome-libs/include > > > > > > > -I/usr/X11R6/include/gtk12 > > > > > > > -I/usr/local/include/glib12 -I/usr/local/include > > > > > > > -I/usr/X11R6/include/gnome-1.0 > > > > > > > -I/usr/X11R6/include -DNEED_GNOMESUPPORT_H > > > > > > > -I/usr/X11R6/lib/gnome-libs/include > -I/usr/X11R6/include/gtk12 > > > > > > > -I/usr/local/include/glib12 -I/usr/local/include -O -pipe > -Wall > > > > > > > -Wno-unused -c procbar.cc -fPIC -DPIC -o .libs/procbar.lo > > > > > > > procbar.cc: In method `Gnome::ProcBar::ProcBar(const > Gtk::Label > > > > > > &, > > > > > > > > const > > > > > > > > > > > > vector<Gdk_Color *,allocator<Gdk_Color *> > &, gint (*)(void > > > > > > *))': > > > > > > > procbar.cc:23: ANSI C++ prohibits conversion from `(void *)' > to > > > > > > > > > > `(...)' > > > > > > > > > > > > gmake[4]: *** [procbar.lo] Error 1 > > > > > > > gmake[4]: Leaving directory > > > > > > > `/usr/ports/x11/gnome--/work/gnomemm-1.2.2/src/gnome--' > > > > > > > gmake[3]: *** [all-recursive] Error 1 > > > > > > > gmake[3]: Leaving directory > > > > > > > `/usr/ports/x11/gnome--/work/gnomemm-1.2.2/src/gnome--' > > > > > > > gmake[2]: *** [all-recursive] Error 1 > > > > > > > gmake[2]: Leaving directory > > > > > > > `/usr/ports/x11/gnome--/work/gnomemm-1.2.2/src' > > > > > > > gmake[1]: *** [all-recursive] Error 1 > > > > > > > gmake[1]: Leaving directory > > > > > > > > > > `/usr/ports/x11/gnome--/work/gnomemm-1.2.2' > > > > > > > > > > > > gmake: *** [all-recursive-am] Error 2 > > > > > > > *** Error code 2 > > > > > > > > > > > > > > Stop in /usr/ports/x11/gnome--. > > > > > > > > > > > > > > > From: Joe Marcus Clarke <marcus@marcuscom.com> > > > > > > > > Date: 06 May 2002 20:37:47 -0400 > > > > > > > > To: Jason de Cordoba <jason@vvi.at> > > > > > > > > Cc: freebsd-gnome@FreeBSD.ORG > > > > > > > > Subject: Re: bonobo-1.0.18 gnomeprint-0.34 missing on > ports > > > > > > and > > > > > > > > pkgs > > > > > > > > > > > > > On Mon, 2002-05-06 at 20:50, Jason de Cordoba wrote: > > > > > > > >> Hi, > > > > > > > >> > > > > > > > >> 1. > > > > > > > >> Trying to > > > > > > > >> /stand/sysinstall > > > > > > > >> > > > > > > > >> Install package > > > > > > > >> x11/gnome > > > > > > > >> > > > > > > > >> I get errors that dependent files gnomeprint-0.34 & > > > > > > > > > > bonobo-1.0.18 > > > > > > > > > > > > >> not found on ftp server > > > > > > > > > > > > > > > > This is broken. Do not build GNOME from packages. > > > > > > > > > > > > > > > >> Also > > > > > > > >> > > > > > > > >> 2. > > > > > > > >> Trying to pkg_add -r gnome on fbsd 4.5 > > > > > > > >> > > > > > > > >> I get errors that > > > > > > > >> > > > > > > > >> pkg_add: could not find package bonobo-1.0.18 ! > > > > > > > >> pkg_add: could not find package gnomeprint-0.34 ! > > > > > > > >> pkg_add: could not find package libgda-0.2.93_2 ! > > > > > > > >> pkg_add: could not find package gnomedb-0.2.93_3 ! > > > > > > > >> pkg_add: could not find package gal-0.19 ! > > > > > > > >> pkg_add: could not find package libglade-0.17_1 ! > > > > > > > >> pkg_add: could not find package gtkhtml-1.0.1 ! > > > > > > > >> pkg_add: pkg_add of dependency `gnomecore-1.4.0.4_3' > > > > > > > >> failed! > > > > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > > >> Also > > > > > > > >> > > > > > > > >> 3. > > > > > > > >> after cvsup'ing my ports and then trying to install > > > > > > > >> /usr/ports/x11/gnome > > > > > > > >> > > > > > > > >> I also get errors of bonobo and gnomeprint is missing > > > > > > > > > > > > > > > > Try deleting all the previously installed GNOME packages, > then > > > > > > > > > > make > > > > > > > > > > > > > everything from ports (i.e. cd /usr/ports/x11/gnome ; make > > > > > > clean > > > > > > > > > > > install). If you run into problems, send the build logs. > > > > > > > > > > > > > > > > Joe > > > > > > > > > > > > > > > >> Please help I have a c programmer coming tomorrow that > thinks > > > > > > > > > > linux > > > > > > > > > > > > >> is kewl and he uses gnome! ;o) > > > > > > > >> > > > > > > > >> Best Regards, > > > > > > > >> Jason > > ---- > > > > > *************** > > *** 42,48 **** > > > > ProcBar(const Gtk::Label &label, > > const vector<Gdk_Color*> &colors, > > - gint (*cb)()); > > > > void set_values (const vector<unsigned> &values); > > > > --- 42,48 ---- > > > > ProcBar(const Gtk::Label &label, > > const vector<Gdk_Color*> &colors, > > + gint (*cb)(void *)); > > > > void set_values (const vector<unsigned> &values); > > > > *************** > > *** 72,78 **** > > > > ProcBar::ProcBar(const Gtk::Label &label, > > const vector<Gdk_Color*> &colors, > > - gint (*cb)()) > > : Gtk::HBox(GTK_HBOX(gtk_object_new(get_type(),0))), > > colors_(0) > > { > > --- 72,78 ---- > > > > ProcBar::ProcBar(const Gtk::Label &label, > > const vector<Gdk_Color*> &colors, > > + gint (*cb)(void *)) > > : Gtk::HBox(GTK_HBOX(gtk_object_new(get_type(),0))), > > colors_(0) > > { > -- > PGP Key: http://www.marcuscom.com/pgp.asc > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-gnome" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?003201c1f592$f3781c90$39e1fcd0>