Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 25 Aug 2009 14:53:45 -0500
From:      Robert Noland <rnoland@FreeBSD.org>
To:        Thierry Herbelot <thierry.herbelot@free.fr>
Cc:        freebsd-hackers@freebsd.org, freebsd-acpi@freebsd.org, freebsd-hardware@freebsd.org
Subject:   Re: GA-MA780G-UD3H motherboard
Message-ID:  <1251230025.45706.280.camel@balrog.2hip.net>
In-Reply-To: <200908252127.48214.thierry.herbelot@free.fr>
References:  <4A9412ED.6080309@freebsd.org> <11167f520908251134u7454267fl7a4e1e4657405a6f@mail.gmail.com> <200908252127.48214.thierry.herbelot@free.fr>

next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 2009-08-25 at 21:27 +0200, Thierry Herbelot wrote:
> Le Tuesday 25 August 2009, Sam Fourman Jr. a écrit :
> > > Meanwhile, if you interested in any information about this motherboard -
> > > data dumps, outputs from tools, etc - please let me know, I will try my
> > > best to provide that.
> >
> > it would be interesting to see a dmesg as a starting point.
> >
> here you are ;-)
> 
> I have plugged a PCI sound board in the machine, but it does seem to be 
> detected (there could be some issue with PCI bus enumeration : I also include 
> a pciconf log)

I'm curious why you would plug in a pci sound card?  You already have
both a standard hda codec as well as the hda codec for the hdmi port of
the video.  If you are discovering that it isn't working... set
hw.snd.default_unit=1 which is typcially your normal analog audio port.
The hdmi port on radeon chips tends to be enumerated before the normal
system codecs, so people tend to think that sound isn't working.

robert.

> 	TfH
> >
> > Sam Fourman Jr.
> > _______________________________________________
> > freebsd-hackers@freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
> > To unsubscribe, send any mail to "freebsd-hackers-unsubscribe@freebsd.org"
> 
> Copyright (c) 1992-2009 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 7.2-STABLE #12: Mon Jul  6 09:37:34 CEST 2009
>     XXX@YYY:/usr/obj/usr/src/sys/GENERIC
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ (3106.64-MHz K8-class CPU)
>   Origin = "AuthenticAMD"  Id = 0x60fb2  Stepping = 2
>   
> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
>   Features2=0x2001<SSE3,CX16>
>   AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
>   AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
>   TSC: P-state invariant
>   Cores per package: 2
> usable memory = 4008947712 (3823 MB)
> avail memory  = 3836862464 (3659 MB)
> ACPI APIC Table: <GBT    GBTUACPI>
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
> This module (opensolaris) contains code covered by the
> Common Development and Distribution License (CDDL)
> see http://opensolaris.org/os/licensing/opensolaris_license/
> ioapic0: Changing APIC ID to 2
> ioapic0 <Version 2.1> irqs 0-23 on motherboard
> kbd1 at kbdmux0
> acpi0: <GBT GBTUACPI> on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> acpi0: reservation of 0, a0000 (3) failed
> acpi0: reservation of 100000, bfce0000 (3) failed
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 900
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> vgapci0: <VGA-compatible display> port 0xee00-0xeeff mem 
> 0xd0000000-0xdfffffff,0xfdfe0000-0xfdfeffff,0xfde00000-0xfdefffff irq 18 at 
> device 5.0 on pci1
> hdac0: <ATI RS780 High Definition Audio Controller> mem 0xfdffc000-0xfdffffff 
> irq 19 at device 5.1 on pci1
> hdac0: HDA Driver Revision: 20090329_0131
> hdac0: [ITHREAD]
> pcib2: <ACPI PCI-PCI bridge> irq 18 at device 10.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigabit 
> Ethernet> port 0xde00-0xdeff mem 0xfdaff000-0xfdafffff,0xfdae0000-0xfdaeffff 
> irq 18 at device 0.0 on pci2
> re0: Using 1 MSI messages
> re0: Chip rev. 0x3c000000
> re0: MAC rev. 0x00400000
> miibus0: <MII bus> on re0
> rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
> rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
> 1000baseT-FDX, auto
> re0: Ethernet address: 00:1f:d0:56:75:23
> re0: [FILTER]
> atapci0: <ATI AHCI controller> port 
> 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 
> 0xfe02f000-0xfe02f3ff irq 22 at device 17.0 on pci0
> atapci0: [ITHREAD]
> atapci0: AHCI Version 01.10 controller with 6 ports detected
> ata2: <ATA channel 0> on atapci0
> ata2: [ITHREAD]
> ata3: <ATA channel 1> on atapci0
> ata3: [ITHREAD]
> ata4: <ATA channel 2> on atapci0
> ata4: [ITHREAD]
> ata5: <ATA channel 3> on atapci0
> ata5: [ITHREAD]
> ata6: <ATA channel 4> on atapci0
> ata6: [ITHREAD]
> ata7: <ATA channel 5> on atapci0
> ata7: [ITHREAD]
> ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 16 at 
> device 18.0 on pci0
> ohci0: [GIANT-LOCKED]
> ohci0: [ITHREAD]
> usb0: OHCI version 1.0, legacy support
> usb0: SMM does not respond, resetting
> usb0: <OHCI (generic) USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
> uhub0: 3 ports with 3 removable, self powered
> ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 16 at 
> device 18.1 on pci0
> ohci1: [GIANT-LOCKED]
> ohci1: [ITHREAD]
> usb1: OHCI version 1.0, legacy support
> usb1: SMM does not respond, resetting
> usb1: <OHCI (generic) USB controller> on ohci1
> usb1: USB revision 1.0
> uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
> uhub1: 3 ports with 3 removable, self powered
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02c000-0xfe02c0ff irq 17 at 
> device 18.2 on pci0
> ehci0: [GIANT-LOCKED]
> ehci0: [ITHREAD]
> usb2: EHCI version 1.0
> usb2: companion controllers, 3 ports each: usb0 usb1
> usb2: <EHCI (generic) USB 2.0 controller> on ehci0
> usb2: USB revision 2.0
> uhub2: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
> uhub2: 6 ports with 6 removable, self powered
> ohci2: <OHCI (generic) USB controller> mem 0xfe02b000-0xfe02bfff irq 18 at 
> device 19.0 on pci0
> ohci2: [GIANT-LOCKED]
> ohci2: [ITHREAD]
> usb3: OHCI version 1.0, legacy support
> usb3: <OHCI (generic) USB controller> on ohci2
> usb3: USB revision 1.0
> uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
> uhub3: 3 ports with 3 removable, self powered
> ohci3: <OHCI (generic) USB controller> mem 0xfe02a000-0xfe02afff irq 18 at 
> device 19.1 on pci0
> ohci3: [GIANT-LOCKED]
> ohci3: [ITHREAD]
> usb4: OHCI version 1.0, legacy support
> usb4: SMM does not respond, resetting
> usb4: <OHCI (generic) USB controller> on ohci3
> usb4: USB revision 1.0
> uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
> uhub4: 3 ports with 3 removable, self powered
> ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe029000-0xfe0290ff irq 19 at 
> device 19.2 on pci0
> ehci1: [GIANT-LOCKED]
> ehci1: [ITHREAD]
> usb5: EHCI version 1.0
> usb5: companion controllers, 3 ports each: usb3 usb4
> usb5: <EHCI (generic) USB 2.0 controller> on ehci1
> usb5: USB revision 2.0
> uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
> uhub5: 6 ports with 6 removable, self powered
> pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
> atapci1: <ATI IXP700 UDMA133 controller> port 
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 20.1 on pci0
> ata0: <ATA channel 0> on atapci1
> ata0: [ITHREAD]
> hdac1: <ATI SB600 High Definition Audio Controller> mem 0xfe024000-0xfe027fff 
> irq 16 at device 20.2 on pci0
> hdac1: HDA Driver Revision: 20090329_0131
> hdac1: [ITHREAD]
> isab0: <PCI-ISA bridge> at device 20.3 on pci0
> isa0: <ISA bus> on isab0
> pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
> pci3: <ACPI PCI bus> on pcib3
> fwohci0: <Texas Instruments TSB43AB23> mem 
> 0xfdcff000-0xfdcff7ff,0xfdcf8000-0xfdcfbfff irq 22 at device 14.0 on pci3
> fwohci0: [FILTER]
> fwohci0: OHCI version 1.10 (ROM=0)
> fwohci0: No. of Isochronous channels is 4.
> fwohci0: EUI64 00:70:c0:59:00:00:1f:d0
> fwohci0: Phy 1394a available S400, 3 ports.
> fwohci0: Link S400, max_rec 2048 bytes.
> firewire0: <IEEE1394(FireWire) bus> on fwohci0
> fwe0: <Ethernet over FireWire> on firewire0
> if_fwe0: Fake Ethernet address: 02:70:c0:00:1f:d0
> fwe0: Ethernet address: 02:70:c0:00:1f:d0
> fwip0: <IP over FireWire> on firewire0
> fwip0: Firewire address: 00:70:c0:59:00:00:1f:d0 @ 0xfffe00000000, S400, 
> maxrec 2048
> sbp0: <SBP-2/SCSI over FireWire> on firewire0
> dcons_crom0: <dcons configuration ROM> on firewire0
> dcons_crom0: bus_addr 0xb6e80000
> fwohci0: Initiate bus reset
> fwohci0: BUS reset
> fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
> ohci4: <OHCI (generic) USB controller> mem 0xfe028000-0xfe028fff irq 18 at 
> device 20.5 on pci0
> ohci4: [GIANT-LOCKED]
> ohci4: [ITHREAD]
> usb6: OHCI version 1.0, legacy support
> usb6: SMM does not respond, resetting
> usb6: <OHCI (generic) USB controller> on ohci4
> usb6: USB revision 1.0
> uhub6: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
> uhub6: 2 ports with 2 removable, self powered
> amdtemp0: <AMD K8 Thermal Sensors> on hostb4
> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
> fdc0: [FILTER]
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> sio0: type 16550A
> sio0: [FILTER]
> ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
> ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
> ppbus0: <Parallel port bus> on ppc0
> ppbus0: [ITHREAD]
> plip0: <PLIP network interface> on ppbus0
> plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> ppc0: [GIANT-LOCKED]
> ppc0: [ITHREAD]
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: [ITHREAD]
> psm0: model Generic PS/2 mouse, device ID 0
> cpu0: <ACPI CPU> on acpi0
> powernow0: <PowerNow! K8> on cpu0
> cpu1: <ACPI CPU> on acpi0
> powernow1: <PowerNow! K8> on cpu1
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> sio2: configured irq 5 not in bitmap of probed irqs 0
> sio2: port may not be enabled
> sio3: configured irq 9 not in bitmap of probed irqs 0
> sio3: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> WARNING: ZFS is considered to be an experimental feature in FreeBSD.
> Timecounters tick every 1.000 msec
> firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
> firewire0: bus manager 0 (me)
> ad4: 238474MB <Seagate ST3250823AS 3.03> at ata2-master SATA150
> ZFS filesystem version 13
> ZFS storage pool version 13
> ad6: 238475MB <Seagate ST3250823AS 3.03> at ata3-master SATA150
> ad8: 238475MB <Seagate ST3250823AS 3.03> at ata4-master SATA150
> acd0: DVDR <HL-DT-ST DVDRAM GH20NS15/IL00> at ata7-master SATA150
> hdac0: HDA Codec #0: ATI RS690/780 HDMI
> pcm0: <HDA ATI RS690/780 HDMI PCM #0 Digital> at cad 0 nid 1 on hdac0
> hdac1: HDA Codec #0: Realtek ALC885
> pcm1: <HDA Realtek ALC885 PCM #0 Analog> at cad 0 nid 1 on hdac1
> pcm2: <HDA Realtek ALC885 PCM #1 Analog> at cad 0 nid 1 on hdac1
> pcm3: <HDA Realtek ALC885 PCM #2 Digital> at cad 0 nid 1 on hdac1
> GEOM_LABEL: Label for provider ad4s1a is ufsid/4895a4a721182022.
> GEOM_LABEL: Label for provider ad4s1d is ufsid/4895a4b3b6d4e02e.
> GEOM_LABEL: Label for provider ad4s1e is ufsid/4895a4b54799f68b.
> GEOM_LABEL: Label for provider ad4s1f is ufsid/4895a4b724bcb48f.
> GEOM_LABEL: Label for provider ad4s2a is ufsid/49185b60bbfa4d50.
> GEOM_LABEL: Label for provider ad6s1 is ext2fs//.
> GEOM_LABEL: Label for provider ad6s2 is ext2fs//1.
> GEOM_LABEL: Label for provider ad8s1a is ufsid/4895a498589c3d5f.
> GEOM_LABEL: Label for provider ad8s1d is ufsid/4895a48d5fd2f14b.
> GEOM_LABEL: Label for provider ad8s1e is ufsid/4895a48489eb6120.
> GEOM_LABEL: Label for provider ad8s1f is ufsid/4895a48a019d7151.
> GEOM_LABEL: Label for provider ad8s2a is ufsid/4729b57b020c7526.
> GEOM_LABEL: Label for provider ad8s2d is ufsid/4729b587458f5554.
> GEOM_LABEL: Label for provider ad8s2e is ufsid/4729b58af29c6330.
> SMP: AP CPU #1 Launched!
> Trying to mount root from ufs:/dev/ad4s2a
> GEOM_LABEL: Label ufsid/49185b60bbfa4d50 removed.
> 
> 
> 
> machine# pciconf -lv
> hostb0@pci0:0:0:0:      class=0x060000 card=0x96001022 chip=0x96001022 
> rev=0x00 hdr=0x00
>     vendor     = 'Advanced Micro Devices (AMD)'
>     class      = bridge
>     subclass   = HOST-PCI
> pcib1@pci0:0:1:0:       class=0x060400 card=0x96021022 chip=0x96021022 
> rev=0x00 hdr=0x01
>     vendor     = 'Advanced Micro Devices (AMD)'
>     class      = bridge
>     subclass   = PCI-PCI
> pcib2@pci0:0:10:0:      class=0x060400 card=0x96001022 chip=0x96091022 
> rev=0x00 hdr=0x01
>     vendor     = 'Advanced Micro Devices (AMD)'
>     class      = bridge
>     subclass   = PCI-PCI
> atapci0@pci0:0:17:0:    class=0x010601 card=0xb0021458 chip=0x43911002 
> rev=0x00 hdr=0x00
>     vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>     device     = 'SB700 SATA Controller [AHCI mode]'
>     class      = mass storage
>     subclass   = SATA
> ohci0@pci0:0:18:0:      class=0x0c0310 card=0x50041458 chip=0x43971002 
> rev=0x00 hdr=0x00
>     vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>     device     = 'SB700 USB OHCI0 Controller'
>     class      = serial bus
>     subclass   = USB
> ohci1@pci0:0:18:1:      class=0x0c0310 card=0x50041458 chip=0x43981002 
> rev=0x00 hdr=0x00
>     vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>     device     = 'SB700 USB OHCI1 Controller'
>     class      = serial bus
>     subclass   = USB
> ehci0@pci0:0:18:2:      class=0x0c0320 card=0x50041458 chip=0x43961002 
> rev=0x00 hdr=0x00
>     vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>     device     = 'SB700 USB EHCI Controller'
>     class      = serial bus
>     subclass   = USB
> ohci2@pci0:0:19:0:      class=0x0c0310 card=0x50041458 chip=0x43971002 
> rev=0x00 hdr=0x00
>     vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>     device     = 'SB700 USB OHCI0 Controller'
>     class      = serial bus
>     subclass   = USB
> ohci3@pci0:0:19:1:      class=0x0c0310 card=0x50041458 chip=0x43981002 
> rev=0x00 hdr=0x00
>     vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>     device     = 'SB700 USB OHCI1 Controller'
>     class      = serial bus
>     subclass   = USB
> ehci1@pci0:0:19:2:      class=0x0c0320 card=0x50041458 chip=0x43961002 
> rev=0x00 hdr=0x00
>     vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>     device     = 'SB700 USB EHCI Controller'
>     class      = serial bus
>     subclass   = USB
> none0@pci0:0:20:0:      class=0x0c0500 card=0x43851458 chip=0x43851002 
> rev=0x3a hdr=0x00
>     vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>     device     = 'ATI SMBus (ATI RD600/RS600)'
>     class      = serial bus
>     subclass   = SMBus
> atapci1@pci0:0:20:1:    class=0x01018a card=0x50021458 chip=0x439c1002 
> rev=0x00 hdr=0x00
>     vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>     device     = 'PATA 133 Controller (SB7xx)'
>     class      = mass storage
>     subclass   = ATA
> hdac1@pci0:0:20:2:      class=0x040300 card=0xa0021458 chip=0x43831002 
> rev=0x00 hdr=0x00
>     vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>     device     = 'IXP SB600 High Definition Audio Controller'
>     class      = multimedia
>     subclass   = HDA
> isab0@pci0:0:20:3:      class=0x060100 card=0x43831002 chip=0x439d1002 
> rev=0x00 hdr=0x00
>     vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>     device     = 'SB700 LPC host controller'
>     class      = bridge
>     subclass   = PCI-ISA
> pcib3@pci0:0:20:4:      class=0x060401 card=0x00000000 chip=0x43841002 
> rev=0x00 hdr=0x01
>     vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>     device     = 'IXP SB600 PCI to PCI Bridge'
>     class      = bridge
>     subclass   = PCI-PCI
> ohci4@pci0:0:20:5:      class=0x0c0310 card=0x50041458 chip=0x43991002 
> rev=0x00 hdr=0x00
>     vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>     device     = 'SB700 USB OHCI2 Controller'
>     class      = serial bus
>     subclass   = USB
> hostb1@pci0:0:24:0:     class=0x060000 card=0x00000000 chip=0x11001022 
> rev=0x00 hdr=0x00
>     vendor     = 'Advanced Micro Devices (AMD)'
>     device     = 'Athlon64/Opteron/Sempron (K8 Family) HyperTransport 
> Technology Configuration'
>     class      = bridge
>     subclass   = HOST-PCI
> hostb2@pci0:0:24:1:     class=0x060000 card=0x00000000 chip=0x11011022 
> rev=0x00 hdr=0x00
>     vendor     = 'Advanced Micro Devices (AMD)'
>     device     = 'Athlon64/Opteron/Sempron (K8 Family) Address Map'
>     class      = bridge
>     subclass   = HOST-PCI
> hostb3@pci0:0:24:2:     class=0x060000 card=0x00000000 chip=0x11021022 
> rev=0x00 hdr=0x00
>     vendor     = 'Advanced Micro Devices (AMD)'
>     device     = 'Athlon64/Opteron/Sempron (K8 Family) DRAM Controller'
>     class      = bridge
>     subclass   = HOST-PCI
> hostb4@pci0:0:24:3:     class=0x060000 card=0x00000000 chip=0x11031022 
> rev=0x00 hdr=0x00
>     vendor     = 'Advanced Micro Devices (AMD)'
>     device     = 'Athlon64/Opteron/Sempron (K8 Family) Miscellaneous Control'
>     class      = bridge
>     subclass   = HOST-PCI
> vgapci0@pci0:1:5:0:     class=0x030000 card=0xd0001458 chip=0x96101002 
> rev=0x00 hdr=0x00
>     vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>     device     = 'Radeon HD 3200 Integrated Graphics Processor (780G)'
>     class      = display
>     subclass   = VGA
> hdac0@pci0:1:5:1:       class=0x040300 card=0x960f1002 chip=0x960f1002 
> rev=0x00 hdr=0x00
>     vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>     class      = multimedia
>     subclass   = HDA
> re0@pci0:2:0:0: class=0x020000 card=0xe0001458 chip=0x816810ec rev=0x02 
> hdr=0x00
>     vendor     = 'Realtek Semiconductor'
>     device     = 'Gigabit Ethernet NIC(NDIS 6.0) (RTL8168/8111)'
>     class      = network
>     subclass   = ethernet
> fwohci0@pci0:3:14:0:    class=0x0c0010 card=0x10001458 chip=0x8024104c 
> rev=0x00 hdr=0x00
>     vendor     = 'Texas Instruments (TI)'
>     device     = 'TSB43AB23 1394a-2000 OHCI PHY/link-layer Controller'
>     class      = serial bus
>     subclass   = FireWire
> _______________________________________________
> freebsd-acpi@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-acpi
> To unsubscribe, send any mail to "freebsd-acpi-unsubscribe@freebsd.org"
-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1251230025.45706.280.camel>