Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 16 Jun 2002 15:20:19 -0700 (PDT)
From:      dlawson@gsc.net
To:        questions@freebsd.org
Subject:   Problems with LinkSys WMP11 Wireless NIC
Message-ID:  <20020616222019.98A7337B407@hub.freebsd.org>

next in thread | raw e-mail | index | archive | help
I have a LinkSys WMP11 card and am trying to configure it
with FreeBSD-Stable.  Everthing looks Ok but I cannot get traffic to the
access point.  This card works ok with a Windows setup on the same machine.
I have included the commands I used to get setup and the wicontrol output
done afterwards:

     wicontrol -k 0x11111111111111111111111111 -v 1
     wicontrol -k 0x22222222222222222222222222 -v 2
     wicontrol -k 0x33333333333333333333333333 -v 3
     wicontrol -k 0x44444444444444444444444444 -v 4
     wicontrol -T 2
     wicontrol -e 1
     wicontrol -n MY-SSID
     ifconfig wi0 inet 1.2.3.4 netmask 0xffffff00

My provider uses 128 bit WEP keys.  The output of wicontrol after this is:

     NIC serial number: [ 0123456789 ]
     Station name: [ FreeBSD WaveLAN/IEEE node ]
     SSID for IBSS creation: [ FreeBSD IBSS ]
     Current netname (SSID): [ MY-SSID ]
     Desired netname (SSID): [ MY-SSID ]
     Current BSSID: [ 00:40:96:49:18:a1 ]
     Channel list: [ 2047 ]
     IBSS channel: [ 6 ]
     Current channel: [ 8 ]
     Comms quality/signal/noise: [ 58 89 0 ]
     Promiscuous mode: [ Off ]
     Port type (1=BSS, 3=ad-hoc): [ 1 ]
     MAC address: [ 00:06:25:03:8a:69 ]
     TX rate (selection): [ 11 ]
     TX rate (actual speed): [ 2 ]
     RTS/CTS handshake threshold: [ 2347 ]
     Create IBSS: [ Off ]
     Access point density: [ 1 ]
     Power Mgmt (1=on, 0=off): [ 0 ]
     Max sleep time: [ 100 ]
     WEP encryption: [ On ]
     TX encryption key: [ 2 ]
     Encryption keys: [ 0x11111111111111111111111111 ][
0x22222222222222222222222222 ][ 0x33333333333333333333333333][
0x44444444444444444444444444]

These values look the same as the windows setup.  My provider says he can
see me associating with the access point but he never sees an IP.  Any
advice will be greatly appreciated.

    Dave



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020616222019.98A7337B407>