Date: Fri, 27 Feb 2009 07:32:32 -0500 From: Kim Culhan <w8hdkim@gmail.com> To: Mike Tancsa <mike@sentex.net> Cc: freebsd-usb@freebsd.org Subject: Re: Novatel U727 not recognized Message-ID: <89dbfdc30902270432x24487790p7b0f8ffe99d2bb@mail.gmail.com> In-Reply-To: <200902262240.n1QMe9Vn006048@lava.sentex.ca> References: <89dbfdc30902241338h2e56af93q5d8fb3905454ea36@mail.gmail.com> <200902261622.17677.hselasky@c2i.net> <89dbfdc30902261228k1e56e18dufb8caa46ef663747@mail.gmail.com> <200902262140.52560.hselasky@c2i.net> <89dbfdc30902261425p7f933721sfdf47099fae2ef0a@mail.gmail.com> <89dbfdc30902261436o4ed73ab1l6877245c33c1cd7e@mail.gmail.com> <200902262240.n1QMe9Vn006048@lava.sentex.ca>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Feb 26, 2009 at 5:40 PM, Mike Tancsa <mike@sentex.net> wrote: > At 05:36 PM 2/26/2009, Kim Culhan wrote: > >> u3g0: <Data Interface> on usbus2 >> u3g0: Found 4 ports. >> umass0: <Novatel Wireless Inc. Novatel Wireless CDMA, class 0/0, rev >> 1.10/0.00, addr 2> on usbus2 >> umass0: =A0SCSI over Bulk-Only; quirks =3D 0x0000 >> umass0:1:0:-1: Attached to scbus1 >> (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 >> (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error >> (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition >> (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0 >> (probe0:umass-sim0:0:0:0): Medium not present >> (probe0:umass-sim0:0:0:0): Unretryable error >> da0 at umass-sim0 bus 0 target 0 lun 0 >> da0: <Novatel MMC Storage 2.31> Removable Direct Access SCSI-2 device >> da0: 1.000MB/s transfers >> da0: Attempt to query device size failed: NOT READY, Medium not present > > If you do a > camcontrol eject pass0 > > does /dev/cuaU* now show up ? > > I have a different Novatel unit where I have to do that to get it to work= . > > umass0: <Novatel Wireless Novatel Wireless HSUPA Modem, class 0/0, rev > 1.10/0.00, addr 2> on uhub0 > vr0: vr_stop: Rx shutdown error > vr0: Using force reset command. > umass0: at uhub0 port 1 (addr 2) disconnected > umass0: detached > ucom0: <Novatel Wireless Novatel Wireless HSUPA Modem, class 0/0, rev > 1.10/0.00, addr 2> on uhub0 > ucom0: configured 2 serial ports (U0.%d) Yes, ejecting the 'cd0' appears to 'solve the problem' The order of events was: Boot the machine without u3g in the kernel Insert the device Issue the eject command: camcontrol eject pass0 the following appears in /dev cuaU0.0 cuaU0.0.init cuaU0.0.lock cuaU0.1 cuaU0.1.init cuaU0.1.lock cuaU0.2 cuaU0.2.init cuaU0.2.lock cuaU0.3 cuaU0.3.init cuaU0.3.lock Removing the device produces: u3g0: at ushub2, port 2, addr 2 (disconnected) umass0: at ushub2, port 2, addr 2 (disconnected) (da0:umass-sim0:0:0:0): lost device (da0:umass-sim0:0:0:0): removing device entry ugen2.2: <Novatel Wireless Inc.> at usbus2 (disconnected) Reinserting the device produces: ugen2.2: <Novatel Wireless Inc.> at usbus2 u3g0: <Data Interface> on usbus2 u3g0: Found 4 ports. umass0: <Novatel Wireless Inc. Novatel Wireless CDMA, class 0/0, rev 1.10/0.00, addr 2> on usbus2 umass0: SCSI over Bulk-Only; quirks =3D 0x0000 umass0:1:0:-1: Attached to scbus1 (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0 (probe0:umass-sim0:0:0:0): Medium not present (probe0:umass-sim0:0:0:0): Unretryable error da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Novatel MMC Storage 2.31> Removable Direct Access SCSI-2 device da0: 1.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present remove it: u3g0: at ushub2, port 2, addr 2 (disconnected) umass0: at ushub2, port 2, addr 2 (disconnected) (da0:umass-sim0:0:0:0): lost device (da0:umass-sim0:0:0:0): removing device entry ugen2.2: <Novatel Wireless Inc.> at usbus2 (disconnected) re-reattach it: ugen2.2: <Novatel Wireless Inc.> at usbus2 u3g0: <Data Interface> on usbus2 u3g0: Found 4 ports. umass0: <Novatel Wireless Inc. Novatel Wireless CDMA, class 0/0, rev 1.10/0.00, addr 2> on usbus2 umass0: SCSI over Bulk-Only; quirks =3D 0x0000 umass0:1:0:-1: Attached to scbus1 (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0 (probe0:umass-sim0:0:0:0): Medium not present (probe0:umass-sim0:0:0:0): Unretryable error da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Novatel MMC Storage 2.31> Removable Direct Access SCSI-2 device da0: 1.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present The U727 has a 'MicroSD' memory card slot which in this case has a 4gb card installed. If the SD card never worked i wouldn't mind a bit :) -kim
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?89dbfdc30902270432x24487790p7b0f8ffe99d2bb>