Date: Sun, 24 Oct 1999 15:26:19 +0100 From: Aernoudt Bottemanne <bottemanne@capitolonline.nl> To: "freebsd-alpha@freebsd.org" <freebsd-alpha@freebsd.org>, Andrew Gallatin <gallatin@cs.duke.edu>, marcel@scc.nl Subject: buildworld problem + received processor correctable error message on PWS433au Message-ID: <3813170B.5A22F06F@capitolonline.nl>
next in thread | raw e-mail | index | archive | help
Hi,
Now that the irq problwm is fixed, I tried to build a new world:
(make -j 32 buildworld > make.out 2>&1 )
It starts the job, but somewhere along the way it stops. The machine
does
not hang, I can login on other consoles etc, but the make process does
not
continue. During compilation I get these messages:
"received processor correctable errors" From the mailinglist archives I
found
that Andrew already mentioned them before, as a Hardware problem with
ECC memory (eg ECC memory being cnot in a well shape)
In the make.out however there is no error message on th last line, in
order to
indicate what the problem could be.
In order to make provide some information that could be helpful to solve
this
problem, I have included the kernel configuration, aswell as the dmesg
output:
KERNEL configuration:
********************************************************************
machine alpha
cpu EV5
ident PRINCESS
maxusers 32
# Platforms supported
options DEC_ST550 # Personal Workstation 433, 500, 600
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options NFS #Network Filesystem
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=10000 #Be pessimistic about Joe SCSI device
options SOFTUPDATES
options UCONSOLE #Allow users to grab the console
options KTRACE #ktrace(1) syscall trace support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
# Standard busses
controller isa0
controller pci0
# Floppy drives
controller fdc0 at isa? port IO_FD1 irq 6 drq 2
disk fd0 at fdc0 drive 0
# SCSI Controllers
controller isp0 # Qlogic family
controller scbus0 # SCSI bus (required)
device da0 # Direct Access (disks)
device cd0 # CD
device pass0 # Passthrough device (direct SCSI access)
# atkbdc0 controls both the keyboard and the PS/2 mouse
controller atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1
device psm0 at atkbdc? irq 12
device vga0 at isa? port ? conflicts
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa?
# real time clock
device mcclock0 at isa0 port 0x70
# Serial (COM) ports
device sio0 at isa0 port IO_COM1 irq 4
device sio1 at isa0 port IO_COM2 irq 3 flags 0x50
# PCI Ethernet NICs.
device de0 # DEC/Intel DC21x4x (``Tulip'')
# Pseudo devices - the number indicates how many units to allocated.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device pty # Pseudo-ttys (telnet etc)
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf #Berkeley packet filter
********************************************************************************
DMESG Output:
********************************************************************************
Unrecognized boot flag '0'.
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #1: Tue May 18 14:49:21 CEST 1999
root@princess.capitolonline.nl:/usr/src/sys/compile/PRINCESS
Digital Personal Workstation (Miata)
Digital Personal WorkStation 433au, 432MHz
8192 byte page size, 1 processor.
CPU: EV56 (21164A) major=7 minor=0 extensions=0x1<BWX>
OSF PAL rev: 0x1000000020116
real memory = 132177920 (129080K bytes)
avail memory = 123650048 (120752K bytes)
=> Preloaded elf kernel "kernel" at 0xfffffc00005ec000.
=> cia0: Pyxis, pass 1
=> cia0: extended capabilities: 1<BWEN>
=> cia0: WARNING: Pyxis pass 1 DMA bug; no bets...
pcib0: <2117x PCI host bus adapter> on cia0
pci0: <PCI bus> on pcib0
de0: <Digital 21142 Fast Ethernet> irq 0 at device 3.0 on pci0
de0: interrupting at CIA irq 0
de0: DEC 21142 [10-100Mb/s] pass 1.1
de0: address 00:00:f8:75:48:c1
de0: enabling 10baseT port
chip0: <CMD 646 IDE controller> irq 1 at device 4.0 on pci0
isab0: <Intel 82378IB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pcib1: <PCI to PCI bridge (vendor=1011 device=0024)> at device 8.0 on
pci0
pci1: <PCI bus> on pcib1
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> irq 20 at device 10.0 on
pci1
isp0: interrupting at CIA irq 20
isp0: Ultra Mode Capable
vga-pci0: <Matrox MGA 2164W graphics accelerator> irq 8 at device 12.0
on pci0
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio0: interrupting at ISA irq 4
sio1: reserved for low-level i/o
fdc0: interrupting at ISA irq 6
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: interrupting at ISA irq 1
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
psm0: interrupting at ISA irq 12
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
=> struct nfssvc_sock bloated (> 256bytes)
=> Try reducing NFS_UIDHASHSIZ
=> struct nfsuid bloated (> 128bytes)
=> Try unionizing the nu_nickname and nu_flag fields
Timecounter "alpha" frequency 433214142 Hz
Waiting 10 seconds for SCSI devices to settle
isp0: driver initiated bus reset of bus 0
Creating DISK da0
Creating DISK da1
Creating DISK da2
Creating DISK cd0
da0 at isp0 bus 0 target 0 lun 0
da0: <Quantum XP34550W LXTA> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing
Enabled
da0: 4095MB (8388314 512 byte sectors: 255H 63S/T 522C)
da1 at isp0 bus 0 target 1 lun 0
da1: <DEC RZ1CC-BA (C) DEC 883F> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing
Enabled
da1: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
cd0 at isp0 bus 0 target 5 lun 0
cd0: <PLEXTOR CD-ROM PX-40TS 1.01> Removable CD-ROM SCSI-2 device
cd0: 3.300MB/s transfers
cd0: cd present [326562 x 2048 byte records]
da2 at isp0 bus 0 target 4 lun 0
da2: <IOMEGA ZIP 100 E.08> Removable Direct Access SCSI-2 device
da2: 3.300MB/s transfers
da2: 96MB (196608 512 byte sectors: 64H 32S/T 96C)
************************************************************************
The => indications are put in by me, they are not part of the output !
These remarks I put in since they wondered me.
Cheers,
Aernoudt
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3813170B.5A22F06F>