Date: Tue, 23 Oct 2007 21:31:12 +0200 From: Per olof Ljungmark <peo@intersonic.se> To: freebsd-stable@freebsd.org Subject: ACPI warning msgs during boot - significance? Message-ID: <471E4C00.2030904@intersonic.se>
next in thread | raw e-mail | index | archive | help
Hi, This unit is supposedly going to be my new home ws, are the below acpi errors something that I need to worry about? Thanks, --per Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-BETA1 #0: Tue Oct 23 18:23:25 CEST 2007 root@weir.i.inter-sonic.com:/usr/obj/usr/src/sys/WEIR Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 3.20GHz (3200.13-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf41 Stepping = 1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNXT-ID,CX16,xTPR> AMD Features=0x20000000<LM> real memory = 1073676288 (1023 MB) avail memory = 1037070336 (989 MB) ACPI APIC Table: <COMPAQ TUMWATER> ACPI Warning (tbfadt-0324): FADT (revision 3) is longer than ACPI 2.0 version, truncating length 0x10C to 0xF4 [20070320] ACPI Error (tbfadt-0516): 32/64X address mismatch in "Gpe0Block": [ F828] [ 0 1F030], using 64X [20070320] ACPI Error (tbutils-0314): Null physical address for ACPI table [(null)] [20070320] ACPI Error (tbutils-0314): Null physical address for ACPI table [(null)] [20070320] ACPI Error (tbutils-0314): Null physical address for ACPI table [(null)] [20070320] ioapic0: Changing APIC ID to 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <COMPAQ CPQ0063> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 3ff00000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0 cpu0: <ACPI CPU> on acpi0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci32: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci1: <ACPI PCI bus> on pcib2 pci0:1:0:0: bad VPD cksum, remain 14 bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x4001> mem 0xf8200000-0xf820ffff irq 16 at device 0.0 on pci1 miibus0: <MII bus> on bge0 brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: Ethernet address: 00:12:79:de:50:6f bge0: [ITHREAD] pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci64: <ACPI PCI bus> on pcib3 vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xf0000000-0xf7ffffff,0xf8100000-0xf810ffff irq 16 at device 0.0 on pci64 vgapci1: <VGA-compatible display> mem 0xf8110000-0xf811ffff at device 0.1 on pci64 uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x5440-0x545f irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x5460-0x547f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x5480-0x549f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0x54a0-0x54bf irq 16 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xf8300000-0xf83003ff irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4 uhub4: 8 ports with 8 removable, self powered pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib4 mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x4000-0x40ff mem 0xf8000000-0xf801ffff,0xf8020000-0xf803ffff irq 18 at device 9.0 on pci2 mpt0: [ITHREAD] mpt0: MPI Version=1.2.12.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x54e0-0x54ef irq 18 at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] atapci1: <Intel ICH5 SATA150 controller> port 0x5810-0x5817,0x5828-0x582b,0x5818-0x581f,0x582c-0x582f,0x54f0-0x54ff irq 18 at device 31.2 on pci0 atapci1: [ITHREAD] ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] pci0: <multimedia, audio> at device 31.5 (no driver attached) acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0 sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff pnpid ORM0000 on isa0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/13 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 3200125240 Hz quality 800 Timecounters tick every 1.000 msec Waiting 5 seconds for SCSI devices to settle acd0: DVDROM <HL-DT-STDVD-ROM GDR8163B/0B26> at ata1-master UDMA40 da0 at mpt0 bus 0 target 1 lun 0 da0: <SEAGATE ST373207LW 0003> Fixed Direct Access SCSI-3 device da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit) da0: Command Queueing Enabled da0: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C) Trying to mount root from ufs:/dev/da0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?471E4C00.2030904>