Date: Thu, 12 Sep 2002 12:38:15 +0100 From: "Jamie Heckford" <jamie@tridentmicrosystems.co.uk> To: <freebsd-stable@FreeBSD.ORG> Subject: Server Locked Up?? Message-ID: <024901c25a50$e1e303f0$5e64a8c0@JAMIEHECKFORD>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
------=_NextPart_000_0246_01C25A59.43A4FAF0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Hi,
Had a strange issue today where our NFS server completly locked up.... no
keyboard response, "daemon" saver froze
on the console, even the power button didnt work to turn it off (had to pull
the plug).
Im suspecting a hardware problem somewhere.... we are running on a Pentium 4
1.3Ghz with 512MB RAM, with 1x 30GB IDE
disk and 3x 120GB.
The server was running NFSD, and the 3x 120GB drives are striped (RAID0)
with vinum (vinum config below)
No clues in the logs apart from these that appear every other day:
Sep 11 16:34:42 lennon /kernel: done
Sep 11 18:29:53 lennon /kernel: ad5: WRITE command timeout tag=0 serv=0 -
resetting
Sep 11 18:29:53 lennon /kernel: ata2: resetting devices .. ad4: DMA limited
to UDMA33, non-ATA66 cable or device
Sep 11 18:29:53 lennon /kernel: done
Sep 12 01:17:58 lennon /kernel: ad5: WRITE command timeout tag=0 serv=0 -
resetting
Sep 12 01:17:58 lennon /kernel: ata2: resetting devices .. ad4: DMA limited
to UDMA33, non-ATA66 cable or device
Sep 12 01:17:58 lennon /kernel: done
(The drives are ATA100 with a compatible controller - they are WDC
WD1200JB-00CRA1)
The server froze at approx. 12:10pm today.
Running FreeBSD 4.6-STABLE #4: Fri Aug 2 13:58:16 BST 2002.
dmesg output also attached.
Thanks in advance for any clues :-)
--
Jamie Heckford
Network Manager
Trident Microsystems Ltd
t: +44(0)1737 780790
f: +44(0)1737 771908
------=_NextPart_000_0246_01C25A59.43A4FAF0
Content-Type: text/plain;
name="lennon-vinumconf.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="lennon-vinumconf.txt"
# Vinum configuration of lennon.trident-uk.co.uk, saved at Tue Jun 18 =
14:45:01 2002
drive vinumdrive0 device /dev/ad5e
drive vinumdrive1 device /dev/ad6e
drive vinumdrive2 device /dev/ad7e
volume vinum0
plex name vinum0.p0 org striped 512s vol vinum0
sd name vinum0.p0.s0 drive vinumdrive0 plex vinum0.p0 len 234436096s =
driveoffset 265s plexoffset 0s
sd name vinum0.p0.s1 drive vinumdrive1 plex vinum0.p0 len 234436096s =
driveoffset 265s plexoffset 512s
sd name vinum0.p0.s2 drive vinumdrive2 plex vinum0.p0 len 234436096s =
driveoffset 265s plexoffset 102
------=_NextPart_000_0246_01C25A59.43A4FAF0
Content-Type: text/plain;
name="lennon-dmesg.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="lennon-dmesg.txt"
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights =
reserved.
FreeBSD 4.6-STABLE #4: Fri Aug 2 13:58:16 BST 2002
admin@lennon.trident-uk.co.uk:/usr/src/sys/compile/LENNON
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1263451412 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1263.45-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x6b1 Stepping =3D 1
=
Features=3D0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory =3D 671072256 (655344K bytes)
avail memory =3D 649293824 (634076K bytes)
Preloaded elf kernel "kernel" at 0xc02e0000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
atapci0: <CMD 649 ATA100 controller> port =
0x2030-0x203f,0x2028-0x202b,0x2020-0x2027,0x2018-0x201b,0x2010-0x2017 =
irq 5 at device 3.0 on pci0
ata2: at 0x2010 on atapci0
ata3: at 0x2020 on atapci0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x2040-0x207f mem =
0xc6e00000-0xc6efffff,0xc6fff000-0xc6ffffff irq 10 at device 4.0 on pci0
fxp0: Ethernet address 00:02:a5:ed:e6:f4
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <ATI Mach64-GR graphics accelerator> at 5.0 irq 11
pci0: <unknown card> (vendor=3D0x0e11, dev=3D0xa0f0) at 6.0 irq 15
isab0: <PCI to ISA bridge (vendor=3D1166 device=3D0201)> at device 15.0 =
on pci0
isa0: <ISA bus> on isab0
atapci1: <ServerWorks CSB5 ATA100 controller> port =
0xa00-0xa03,0x2000-0x200f,0-0x3,0-0x7,0x3f4-0x3f7,0x1f0-0x1f7 at device =
15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
pci0: <OHCI USB controller> at 15.2 irq 15
pcib2: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib2
pcib1: <Host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
eisa0: <EISA bus> on motherboard
mainboard0: <CPQ0721 (System Board)> on eisa0 slot 0
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xee000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on =
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
IP packet filtering initialized, divert disabled, rule-based forwarding =
enabled, default to accept, unlimited logging
ata0-slave: ATA identify retries exceeded
ad4: 38166MB <MAXTOR 6L040J2> [77545/16/63] at ata2-master UDMA100
ad5: 114473MB <WDC WD1200JB-00CRA1> [232581/16/63] at ata2-slave UDMA100
ad6: 114473MB <WDC WD1200JB-00CRA1> [232581/16/63] at ata3-master =
UDMA100
ad7: 114473MB <WDC WD1200JB-00CRA1> [232581/16/63] at ata3-slave UDMA100
Mounting root from ufs:/dev/ad4s1a
stray irq 7
stray irq 7
stray irq 7
too many stray irq 7's; not logging any more
------=_NextPart_000_0246_01C25A59.43A4FAF0--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?024901c25a50$e1e303f0$5e64a8c0>