Date: Sun, 01 Apr 2001 21:48:48 +0800 From: Thomas Lau <lkthomas@hkicable.com> To: freebsd-questions@FreeBSD.ORG Subject: How can I know if RAM error? Message-ID: <3AC731BF.125F4C40@hkicable.com> References: <3AC72AA1.A48F3560@hkicable.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> well, someone telling me maybe memory error, so I plug out my new > installed 256MB RAM, OH, work fine now > no compile error, but how can I bench that which memory error? > or my mainboard have problem? > is it have program can help me? > I got some hints, when I am running win2k server that I installed 256MB > RAM first time, blue screen > I hope someone can help me. Thanks > > Copyright (c) 1992-2001 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > > The Regents of the University of California. All rights > reserved. > FreeBSD 4.3-RC #0: Sat Mar 31 22:35:42 HKT 2001 > root@cm61-18-16-156.hkcable.com.hk:/usr/src/sys/compile/GENERIC > Timecounter "i8254" frequency 1193182 Hz > Timecounter "TSC" frequency 501140393 Hz > CPU: AMD-K6(tm)-III Processor (501.14-MHz 586-class CPU) > Origin = "AuthenticAMD" Id = 0x5d4 Stepping = 4 > Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX> > AMD Features=0xc0000800<SYSCALL,DSP,3DNow!> > real memory = 268369920 (262080K bytes) > config> di sn0 > config> di lnc0 > config> di ie0 > config> di fe0 > No such device: fe0 > Invalid command or syntax. Type `?' for help. > config> di cs0 > config> di bt0 > No such device: bt0 > Invalid command or syntax. Type `?' for help. > config> di aic0 > No such device: aic0 > Invalid command or syntax. Type `?' for help. > config> di aha0 > No such device: aha0 > Invalid command or syntax. Type `?' for help. > config> di adv0 > No such device: adv0 > Invalid command or syntax. Type `?' for help. > config> q > avail memory = 258252800 (252200K bytes) > Preloaded elf kernel "kernel" at 0xc0308000. > Preloaded userconfig_script "/boot/kernel.conf" at 0xc030809c. > K6-family MTRR support enabled (2 registers) > md0: Malloc disk > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcib0: <Host to PCI bridge> on motherboard > pci0: <PCI bus> on pcib0 > pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 > on pci0 > pci1: <PCI bus> on pcib2 > pci1: <NVidia Riva Ultra Vanta TNT2 graphics accelerator> at 0.0 irq 11 > isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <VIA 82C686 ATA66 controller> port 0xd000-0xd00f at device 7.1 > on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > pci0: <VIA 83C572 USB controller> at 7.2 irq 10 > pci0: <VIA 83C572 USB controller> at 7.3 irq 10 > pci0: <unknown card> (vendor=0x1102, dev=0x0002) at 8.0 irq 11 > pci0: <unknown card> (vendor=0x1102, dev=0x7002) at 8.1 > ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xe400-0xe41f irq 5 at > device 9.0 on pci0 > ed0: address 00:a0:4b:06:b9:73, type NE2000 (16 bit) > tekram_trm0: <Tekram DC395U/UW/F DC315/U Fast20 Wide SCSI Adapter> port > 0xe800-0xe8ff mem 0xdd000000-0xdd000fff irq 10 at device 11.0 on pci0 > tekram_trm0: driver is using old-style compatibility shims > pcib1: <Host to PCI bridge> on motherboard > pci2: <PCI bus> on pcib1 > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on > isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model IntelliMouse, device ID 3 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on > isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 8250 > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > ppc0: cannot reserve I/O port range > ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable > ad0: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-master UDMA33 > ad2: 19574MB <IBM-DPTA-372050> [39770/16/63] at ata1-master UDMA66 > ad3: 1549MB <WDC AC21600H> [3148/16/63] at ata1-slave WDMA2 > acd0: CDROM <MATSHITA CR-583> at ata0-slave using PIO3 > Waiting 2 seconds for SCSI devices to settle > Mounting root from ufs:/dev/ad0s1a > uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 10 at device > 7.2 on pci0 > usb0: <VIA 83C572 USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 10 at device > 7.3 on pci0 > usb1: <VIA 83C572 USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3AC731BF.125F4C40>