Date: Fri, 01 Feb 2008 13:30:10 +0100 From: Marko Kobal <marko.kobal@arctur.si> To: freebsd-scsi@freebsd.org Subject: freeBSD 6.3 and LSI Logic 1030 = only 3.300MB/s Message-ID: <47A310D2.4070805@arctur.si>
next in thread | raw e-mail | index | archive | help
Hi, I've upgraded one of my boxes from 6.2 to freeBSD 6.3. I have on-board LSI Logic 1030 SCSI Ultra4 Adapter, on it I have attached two IBM Ultra-320 SCSI 36GB disks. See the dmesg output: ... mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xb000-0xb0ff mem 0xf5010000-0xf501ffff,0xf5000000-0xf500ffff irq 32 at device 3.0 on pci4 mpt0: [GIANT-LOCKED] mpt0: MPI Version=1.2.14.0 mpt0: Capabilities: ( RAID-1 SAFTE ) mpt0: 1 Active Volume (1 Max) mpt0: 2 Hidden Drive Members (6 Max) ... da1 at mpt0 bus 0 target 4 lun 0 da1: <LSILOGIC 1030 IM 1000> Fixed Direct Access SCSI-2 device da1: 3.300MB/s transfers, Tagged Queueing Enabled da1: 34702MB (71071560 512 byte sectors: 255H 63S/T 4424C) ... It is showing that logical device da1 has only 3.3MB/s transfer rate!? Before the upgrade it was showing the correct 320MB/s. After a few quick disk test I can confirm that it is running slower than before (but not as slow as 3.3MB/s). Is there something wrong with the mpt driver in 6.3? And also, is there any utility to access LSI Logic 1030 BIOS under freeBSD? Thanks for help! -- Kind regards, Marko Kobal.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?47A310D2.4070805>