Date: Sat, 20 Sep 2008 18:07:11 +0200 From: Volker <volker@vwsoft.com> To: "Carlos A. M. dos Santos" <unixmania@gmail.com> Cc: freebsd-hackers@freebsd.org, Benjie Chen <benjie@addgene.org>, "freebsd-hardware@freebsd.org" <freebsd-hardware@freebsd.org> Subject: Re: Re: Interrupts issues Message-ID: <48D51FAF.70603@vwsoft.com> In-Reply-To: <e71790db0809191923pfd79a8eyc0414c9ec8e10663@mail.gmail.com> References: <c53be070809190804s66742847pb832d7d3801231fb@mail.gmail.com> <e71790db0809191923pfd79a8eyc0414c9ec8e10663@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 12/23/-58 20:59, Carlos A. M. dos Santos wrote: > On Fri, Sep 19, 2008 at 12:04 PM, Benjie Chen <benjie@addgene.org> wrote: >> Hi FreeBSD hackers: >> >> I have two Dell workstations that I recently added FreeBSD 6.2 on. One >> is a Precision T3400, one is an Inspiron 530. Nothing fancy. Installed >> FBsd. Everything else is fine except both machines have interrupt >> storm issues: one core (both dual core) is 100% servicing interrupts. >> On the Precision, it's irq20 atapci, on Inspiron it's irq19 uhci. The >> other core is fine and both machines run well otherwise. >> >> I saw several recent posts on the net about some of these issues and >> did not find a resolution. It seems unlikely that it's just a ata or >> usb issue since both machines happen to have the same problem. >> >> Any thoughts? > > Please provide the output of "dmesg" after a boot in verbose mode. > This may help the maintainers to understand your problem and give you > additional instructions. > > Do you have any special reason to use FreeBSD 6.2? It is a rather old > version, ... 6.2 has already been EOL'd in May.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?48D51FAF.70603>