Date: Sun, 16 Jun 2002 05:56:36 -0400 From: "Joe Joplin" <joejop@triad.rr.com> To: <FreeBSD-questions@FreeBSD.org> Subject: Trying to get two NICs installed on 4.5 Message-ID: <001201c2151c$1a8ed0f0$22941a42@2kpro2>
next in thread | raw e-mail | index | archive | help
I have installed 4.5 Release. My machine has two Network cards. Both cards are ISAs with the Realtek 8019 chipset, and they are NE2000 compatible. Right after install it recognizes that I have one Network Card (actually did a floppy install with ftp for the source), but I can't get the second one to work. I have attempted to recompile my kernel twice with the settings for both cards. These are the lines from the kernel config device ed0 at isa? port 0x200 irq 5 iomem 0xc8000 device ed1 at isa? port 0x280 irq 10 iomem 0xd8000 These is the line from rc.conf interfaces = "ed0 ed1 lo0" The cards are Plug and Play and I can't change this option. The ed0 line are the settings that show up for the card that is detected correctly, and I am guessing on the second using what I think is available irq, port, etc. After rebooting I can't use either ed0 or ed1 (get a timeout error, but I do see a MAC address for ed1 during boot), and a third ed2 shows up through auto and plug and play. ed2 works but I can't get to the second card. I am stuck. I am newbie and I could use some help. Thanks, Johnny B. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001201c2151c$1a8ed0f0$22941a42>