Date: Fri, 10 Sep 2004 20:39:05 +0200 From: Wilko Bulte <wb@freebie.xs4all.nl> To: current@freebsd.org Subject: 5.3-BETA3 laptop sez: xf86MapVidMem: Address 0xd0100000 outside allowable range Message-ID: <20040910183905.GA21674@freebie.xs4all.nl>
next in thread | raw e-mail | index | archive | help
--y0ulUmNC+osPPQO6
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Hi there,
I'm in the process of getting my Compaq EVO N160 to 5.3-BETA3
to see how well it works. Work it does quite well, apart
from the new X.org x-stuff reporting:
xf86MapVidMem: Address 0xd0100000 outside allowable range
Verbose dmesg.boot and Xorg.0.log attached.
Any ideas? Suggestions are much appreciated.
W/
--
Wilko Bulte wilko@FreeBSD.org
--y0ulUmNC+osPPQO6
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.boot"
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA3 #0: Wed Sep 8 21:12:45 CEST 2004
root@chuck.WBnet:/usr/src/sys/i386/compile/CHUCK
Preloaded elf kernel "/boot/kernel/kernel" at 0xc07fb000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc07fb250.
Calibrating clock(s) ... i8254 clock: 1193181 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1065765073 Hz
CPU: Intel(R) Celeron(TM) CPU 1066MHz (1065.77-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 267780096 (255 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000826000 - 0x000000000fab1fff, 254328832 bytes (62092 pages)
avail memory = 256573440 (244 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f6440
bios32: Entry = 0xfd850 (c00fd850) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd850+0x14b
pnpbios: Found PnP BIOS data at 0xc00f6470
pnpbios: Entry = f0000:9194 Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
acpi0: <PTLTD RSDT> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000e8c0
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=35758086)
pcibios: BIOS version 2.10
Found $PIR table, 11 entries at 0xc00fdf10
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 30 A 0x60 3 4 5 7 9 10 11
embedded 0 30 B 0x61 3 4 5 7 9 10 11
embedded 0 30 C 0x62 3 4 5 7 9 10 11
embedded 0 30 D 0x63 3 4 5 7 9 10 11
slot 1 2 4 A 0x61 3 4 5 7 9 10 11
embedded 2 5 A 0x68 3 4 5 7 9 11
embedded 2 6 A 0x63 3 4 5 7 9 10 11
embedded 2 8 A 0x68 3 4 5 7 9 11
embedded 0 0 A 0x60 3 4 5 7 9 10 11
embedded 0 0 B 0x61 3 4 5 7 9 10 11
embedded 0 0 C 0x62 3 4 5 7 9 10 11
embedded 0 0 D 0x63 3 4 5 7 9 10 11
embedded 0 31 A 0x62 3 4 5 7 9 10 11
embedded 0 31 B 0x61 3 4 5 7 9 10 11
embedded 0 29 A 0x60 3 4 5 7 9 10 11
embedded 0 29 B 0x63 3 4 5 7 9 10 11
embedded 0 29 C 0x62 3 4 5 7 9 10 11
embedded 0 29 D 0x6b 3 4 5 7 9 10 11
embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 A 0x60 3 4 5 7 9 10 11
embedded 1 0 A 0x60 3 4 5 7 9 10 11
AcpiOsDerivePciId: bus 2 dev 6 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_ec0: <Embedded Controller: GPE 0x1d, GLK> port 0x66,0x62 on acpi0
acpi_ec0: info: new max delay is 30 us
acpi_ec0: info: new max delay is 100 us
acpi_ec0: info: new max delay is 110 us
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (2 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
acpi link get: empty IRQ resource
acpi link get: empty IRQ resource
ACPI PCI link initial configuration:
\\_SB_.PCI0.LPCB.LNKA irq 0: [ 3 4 5 7 9 10 11 14 15] 11+ low,level,sharable 0.2.0
\\_SB_.PCI0.LPCB.LNKA irq 0: [ 3 4 5 7 9 10 11 14 15] 11+ low,level,sharable 0.29.0
\\_SB_.PCI0.LPCB.LNKD irq 0: [ 3 4 5 7 9 10 11 14 15] 10+ low,level,sharable 0.29.1
\\_SB_.PCI0.LPCB.LNKC irq 0: [ 3 4 5 7 9 10 11 14 15] 0+ low,level,sharable 0.29.2
\\_SB_.PCI0.LPCB.LNKH irq 0: [ 3 4 5 7 9 10 11 14 15] 0+ low,level,sharable 0.29.3
\\_SB_.PCI0.LPCB.LNKC irq 0: [ 3 4 5 7 9 10 11 14 15] 0+ low,level,sharable 0.31.0
\\_SB_.PCI0.LPCB.LNKB irq 0: [ 3 4 5 7 9 10 11 14 15] 5+ low,level,sharable 0.31.1
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base e0000000, size 28, enabled
found-> vendor=0x8086, dev=0x3575, revid=0x04
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3576, revid=0x04
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0020, cachelnsz=0 (dwords)
lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00001840, size 5, enabled
pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LPCB.LNKA)
pcib0: possible interrupts: 3 4 5 7 9 10 11 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LPCB.LNKA (references 2, priority 25722):
interrupts: 11 10 5 9 7 4 3 15 14
penalty: 70 70 120 140 5070 5070 5070 50070 50070
\\_SB_.PCI0.LPCB.LNKC (references 2, priority 25722):
interrupts: 11 10 5 9 7 4 3 15 14
penalty: 70 70 120 140 5070 5070 5070 50070 50070
\\_SB_.PCI0.LPCB.LNKD (references 1, priority 12861):
interrupts: 11 10 5 9 7 4 3 15 14
penalty: 70 70 120 140 5070 5070 5070 50070 50070
\\_SB_.PCI0.LPCB.LNKH (references 1, priority 12861):
interrupts: 11 10 5 9 7 4 3 15 14
penalty: 70 70 120 140 5070 5070 5070 50070 50070
\\_SB_.PCI0.LPCB.LNKB (references 1, priority 12861):
interrupts: 11 10 5 9 7 4 3 15 14
penalty: 70 70 120 140 5070 5070 5070 50070 50070
pcib0: slot 29 INTA routed to irq 11 via \\_SB_.PCI0.LPCB.LNKA
found-> vendor=0x8086, dev=0x2482, revid=0x02
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type 4, range 32, base 00001860, size 5, enabled
pcib0: matched entry for 0.29.INTB (src \\_SB_.PCI0.LPCB.LNKD)
pcib0: possible interrupts: 3 4 5 7 9 10 11 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LPCB.LNKC (references 2, priority 25882):
interrupts: 10 11 5 9 7 4 3 15 14
penalty: 140 160 190 280 5140 5140 5140 50140 50140
\\_SB_.PCI0.LPCB.LNKD (references 1, priority 12941):
interrupts: 10 11 5 9 7 4 3 15 14
penalty: 140 160 190 280 5140 5140 5140 50140 50140
\\_SB_.PCI0.LPCB.LNKH (references 1, priority 12941):
interrupts: 10 11 5 9 7 4 3 15 14
penalty: 140 160 190 280 5140 5140 5140 50140 50140
\\_SB_.PCI0.LPCB.LNKB (references 1, priority 12941):
interrupts: 10 11 5 9 7 4 3 15 14
penalty: 140 160 190 280 5140 5140 5140 50140 50140
pcib0: slot 29 INTB routed to irq 10 via \\_SB_.PCI0.LPCB.LNKD
found-> vendor=0x8086, dev=0x2484, revid=0x02
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
found-> vendor=0x8086, dev=0x2448, revid=0x42
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x248c, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00001800, size 4, enabled
found-> vendor=0x8086, dev=0x248a, revid=0x02
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 00001820, size 5, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LPCB.LNKB)
pcib0: possible interrupts: 3 4 5 7 9 10 11 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LPCB.LNKC (references 2, priority 26040):
interrupts: 10 11 5 9 7 4 3 15 14
penalty: 220 230 260 420 5210 5210 5210 50210 50210
\\_SB_.PCI0.LPCB.LNKH (references 1, priority 13020):
interrupts: 10 11 5 9 7 4 3 15 14
penalty: 220 230 260 420 5210 5210 5210 50210 50210
\\_SB_.PCI0.LPCB.LNKB (references 1, priority 13020):
interrupts: 10 11 5 9 7 4 3 15 14
penalty: 220 230 260 420 5210 5210 5210 50210 50210
pcib0: slot 31 INTB routed to irq 5 via \\_SB_.PCI0.LPCB.LNKB
found-> vendor=0x8086, dev=0x2483, revid=0x02
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
map[10]: type 4, range 32, base 00001c00, size 8, port disabled
map[14]: type 4, range 32, base 00001880, size 6, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LPCB.LNKB)
pcib0: slot 31 INTB is already routed to irq 5
found-> vendor=0x8086, dev=0x2485, revid=0x02
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
agp0: <Intel 82830 host to AGP bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0
agp0: Reserved 0x10000000 bytes for rid 0x10 type 3 at 0xe0000000
agp0: allocating GATT for aperture of size 228M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x2000-0x2fff
pcib1: memory decode 0xd0100000-0xd01fffff
pcib1: prefetched decode 0xd8000000-0xdfffffff
ACPI PCI link initial configuration:
\\_SB_.PCI0.LPCB.LNKA irq*11: [ 3 4 5 7 9 10 11 14 15] 11+ low,level,sharable 1.0.0
\\_SB_.PCI0.LPCB.LNKB irq* 5: [ 3 4 5 7 9 10 11 14 15] 5+ low,level,sharable 1.0.1
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base d8000000, size 27, enabled
pcib1: device (null) requested decoded memory range 0xd8000000-0xdfffffff
map[14]: type 4, range 32, base 00002000, size 8, enabled
pcib1: device (null) requested decoded I/O range 0x2000-0x20ff
map[18]: type 1, range 32, base d0100000, size 16, enabled
pcib1: device (null) requested decoded memory range 0xd0100000-0xd010ffff
pcib1: matched entry for 1.0.INTA (src \\_SB_.PCI0.LPCB.LNKA)
pcib1: slot 0 INTA is already routed to irq 11
found-> vendor=0x1002, dev=0x4c59, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0383, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1840-0x185f irq 11 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1860-0x187f irq 10 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x3000-0x3fff
pcib2: memory decode 0xd0200000-0xd02fffff
pcib2: prefetched decode 0xfff00000-0xfffff
pcib2: Subtractively decoded bridge.
ACPI PCI link initial configuration:
\\_SB_.PCI0.LPCB.LNKB irq* 5: [ 3 4 5 7 9 10 11 14 15] 5+ low,level,sharable 2.4.0
\\_SB_.PCI0.LPCB.LNKE irq 0: [ 3 4 5 7 9 10 11 14 15] 9+ low,level,sharable 2.5.0
\\_SB_.PCI0.LPCB.LNKD irq*10: [ 3 4 5 7 9 10 11 14 15] 10+ low,level,sharable 2.6.0
\\_SB_.PCI0.LPCB.LNKE irq 0: [ 3 4 5 7 9 10 11 14 15] 9+ low,level,sharable 2.8.0
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 1, range 32, base d0210000, size 16, memory disabled
pcib2: device (null) requested decoded memory range 0xd0210000-0xd021ffff
map[14]: type 4, range 32, base 00003040, size 3, port disabled
pcib2: device (null) requested decoded I/O range 0x3040-0x3047
found-> vendor=0x14f1, dev=0x2f00, revid=0x01
bus=2, slot=4, func=0
class=07-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0100, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base d0201000, size 11, enabled
pcib2: device (null) requested decoded memory range 0xd0201000-0xd02017ff
map[14]: type 1, range 32, base d0204000, size 14, enabled
pcib2: device (null) requested decoded memory range 0xd0204000-0xd0207fff
found-> vendor=0x104c, dev=0x8023, revid=0x00
bus=2, slot=5, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0112, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, enabled
found-> vendor=0x104c, dev=0xac50, revid=0x01
bus=2, slot=6, func=0
class=06-07-00, hdrtype=0x02, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base d0200000, size 12, enabled
pcib2: device (null) requested decoded memory range 0xd0200000-0xd0200fff
map[14]: type 4, range 32, base 00003000, size 6, enabled
pcib2: device (null) requested decoded I/O range 0x3000-0x303f
pcib2: matched entry for 2.8.INTA (src \\_SB_.PCI0.LPCB.LNKE)
pcib2: possible interrupts: 3 4 5 7 9 10 11 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LPCB.LNKC (references 2, priority 26202):
interrupts: 10 11 5 9 3 4 7 14 15
penalty: 300 310 350 500 5290 5290 5290 50290 50290
\\_SB_.PCI0.LPCB.LNKE (references 2, priority 26202):
interrupts: 10 11 5 9 7 4 3 15 14
penalty: 300 310 350 500 5290 5290 5290 50290 50290
\\_SB_.PCI0.LPCB.LNKH (references 1, priority 13101):
interrupts: 10 11 5 9 3 4 7 14 15
penalty: 300 310 350 500 5290 5290 5290 50290 50290
pcib2: slot 8 INTA routed to irq 9 via \\_SB_.PCI0.LPCB.LNKE
found-> vendor=0x8086, dev=0x1031, revid=0x42
bus=2, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0113, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
pci2: <simple comms> at device 4.0 (no driver attached)
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xd0204000-0xd0207fff,0xd0201000-0xd02017ff at device 5.0 on pci2
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xd0201000
pcib2: matched entry for 2.5.INTA (src \\_SB_.PCI0.LPCB.LNKE)
pcib2: slot 5 INTA is already routed to irq 9
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:50:8b:70:2f:53:04:83
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
cbb0: <TI1410 PCI-CardBus Bridge> at device 6.0 on pci2
pcib2: device cbb0 requested decoded memory range 0xd0200000-0xd02fffff
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xd0202000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib2: matched entry for 2.6.INTA (src \\_SB_.PCI0.LPCB.LNKD)
pcib2: slot 6 INTA is already routed to irq 10
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0xac50104c 0x02100007 0x06070001 0x00022000
0x10: 0xd0202000 0x020000a0 0x20040302 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010a
0x40: 0xb1030e11 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0xc864b061 0x00000000 0x00000000 0x012c1202
0x90: 0x616482c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe110001 0x00c00000 0x00000001 0x0000001f
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x3000-0x303f mem 0xd0200000-0xd0200fff irq 9 at device 8.0 on pci2
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0200000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1031 0e11 0093 0042
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:02:a5:9d:b3:30
fxp0: [MPSAFE]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 0x1800-0x180f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1800
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=51 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x04 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:6
psm0: syncmask:c0, syncbits:00
sio0: irq maps: 0x201 0x211 0x201 0x201
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
acpi_ec0: info: new max delay is 140 us
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
device_attach: fdc0 attach returned 6
acpi_ec0: info: new max delay is 180 us
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
device_attach: fdc0 attach returned 6
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xdc000-0xdffff,0xdb000-0xdbfff,0xc0000-0xcdfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83
b4 1f 00 4f 0d 0e 00 00 07 80 91 87 8f 28 1f 8f
b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83
b4 1f 00 4f 0d 0e 00 00 07 80 91 87 8f 28 1f 8f
b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1065765073 Hz quality 800
Timecounters tick every 10.000 msec
Linux ELF exec handler installed
lo0: bpf attached
acpi_acad0: acline initialization start
system power profile changed to 'economy'
acpi_acad0: Off Line
acpi_acad0: acline initialization done, tried 1 times
acpi_cmbat0: battery initialization start
acpi_ec0: info: new max delay is 220 us
acpi_ec0: info: new max delay is 11000 us
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on Intel ICH3 chip
ata0-master: setting UDMA100 on Intel ICH3 chip
ad0: <HITACHI_DK23DA-20/00J2A0A1> ATA-5 disk at ata0-master
ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ATAPI_RESET time = 30us
ata1-master: setting PIO4 on Intel ICH3 chip
ata1-master: setting UDMA33 on Intel ICH3 chip
acd0: <CRN-8243B/2.04> CDROM drive at ata1 as master
acd0: read 4125KB/s (4125KB/s), 128KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):700/254/63 s:63 l:11261502
[1] f:80 typ:165 s(CHS):701/0/1 e(CHS):1023/254/63 s:11261565 l:27808515
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 5765889024 end 5765921279
GEOM: Configure ad0s2, start 5765921280 length 14237959680 end 20003880959
GEOM: Configure ad0s2a, start 0 length 209715200 end 209715199
GEOM: Configure ad0s2b, start 209715200 length 269484032 end 479199231
GEOM: Configure ad0s2c, start 0 length 14237959680 end 14237959679
GEOM: Configure ad0s2d, start 479199232 length 67108864 end 546308095
GEOM: Configure ad0s2e, start 546308096 length 67108864 end 613416959
GEOM: Configure ad0s2f, start 613416960 length 5368709120 end 5982126079
GEOM: Configure ad0s2g, start 5982126080 length 8255833600 end 14237959679
acpi_cmbat0: battery initialization done, tried 1 times
pcib2: device pccard0 requested decoded memory range 0xd0200000-0xd02fffff
pccard0: CIS version PCCARD 2.0 or 2.1
pccard0: CIS info: Cisco Systems, 350 Series Wireless LAN Adapter
pccard0: Manufacturer code 0x15f, product 0xa
pccard0: function 0: network adapter, ccr addr 3e0 mask 7
pccard0: function 0, config table entry 5: I/O card; irq mask ffff; iomask 6, iospace 0-3f; io16 irqlevel
pcib2: device pccard0 requested decoded I/O range 0x3000-0x3fff
pcib2: device pccard0 requested decoded memory range 0xd0200000-0xd02fffff
an0: <Cisco Systems 350 Series Wireless LAN Adapter> at port 0x3080-0x30bf irq 10 function 0 config 5 on pccard0
pcib2: device an0 requested decoded I/O range 0x3080-0x30bf
pcib2: device pccard0 requested decoded I/O range 0x3080-0x30bf
pcib2: device an0 requested decoded I/O range 0x3080-0x30bf
an0: record length mismatch -- expected 194, got 196 for Rid ff10
an0: record length mismatch -- expected 192, got 200 for Rid ff00
an0: got RSSI <-> dBM map
an0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
an0: bpf attached
an0: Ethernet address: 00:09:b7:7b:9d:16
an0: [GIANT-LOCKED]
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
an0: record length mismatch -- expected 194, got 196 for Rid ff10
an0: record length mismatch -- expected 194, got 196 for Rid ff10
--y0ulUmNC+osPPQO6
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="Xorg.0.log"
Release Date: 18 December 2003
X Protocol Version 11, Revision 0, Release 6.7
Build Operating System: FreeBSD 5.3 i386 [ELF]
Current Operating System: FreeBSD chuck.WBnet 5.3-BETA3 FreeBSD 5.3-BETA3 #0: Wed Sep 8 21:12:45 CEST 2004 root@chuck.WBnet:/usr/src/sys/i386/compile/CHUCK i386
Build Date: 09 September 2004
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 10 20:25:54 2004
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Keyboard: CustomKeycode disabled
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/Speedo/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/Speedo/").
(WW) The directory "/usr/X11R6/lib/X11/fonts/freefont/" does not exist.
Entry deleted from font path.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/URW/,unix/:7101"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(WW) checkDevMem: failed to open /dev/mem (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on freebsd
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000e9c0, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,3575 card ffff,ffff rev 04 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,3576 card 0000,0000 rev 04 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,2482 card 0e11,009c rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2484 card 0e11,009c rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 42 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,248c card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,248a card 0e11,009c rev 02 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,2483 card 0e11,009c rev 02 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,2485 card 0e11,005c rev 02 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4c59 card 0e11,b11b rev 00 class 03,00,00 hdr 00
(II) PCI: 02:04:0: chip 14f1,2f00 card 0e11,8d89 rev 01 class 07,80,00 hdr 00
(II) PCI: 02:05:0: chip 104c,8023 card 0e11,b1b1 rev 00 class 0c,00,10 hdr 00
(II) PCI: 02:06:0: chip 104c,ac50 card fffc,ffff rev 01 class 06,07,00 hdr 02
(II) PCI: 02:08:0: chip 8086,1031 card 0e11,0093 rev 42 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[2] -1 0 0x00002800 - 0x000028ff (0x100) IX[B]
[3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xd0100000 - 0xd01fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]
[1] -1 0 0x00003400 - 0x000034ff (0x100) IX[B]
[2] -1 0 0x00003800 - 0x000038ff (0x100) IX[B]
[3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xd0200000 - 0xd02fffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:6:0), (2,3,4), BCTRL: 0x0740 (VGA_EN is cleared)
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon Mobility M6 LY rev 0, Mem @ 0xd8000000/27, 0xd0100000/16, I/O @ 0x2000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xffffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xd0200000 - 0xd03fffff (0x200000) MX[B]E
[1] -1 0 0xd0204000 - 0xd0207fff (0x4000) MX[B]E
[2] -1 0 0xd0201000 - 0xd0201fff (0x1000) MX[B]E
[3] -1 0 0xd0210000 - 0xd021ffff (0x10000) MX[B]E
[4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]EO
[5] -1 0 0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
[6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[7] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]E
[8] -1 0 0x00003040 - 0x0000307f (0x40) IX[B]E
[9] -1 0 0x00001880 - 0x000018ff (0x80) IX[B]E
[10] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]E
[11] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]E
[12] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
[13] -1 0 0x00000374 - 0x00000377 (0x4) IX[B]E
[14] -1 0 0x00000170 - 0x0000017f (0x10) IX[B]E
[15] -1 0 0x000003f4 - 0x000003f7 (0x4) IX[B]E
[16] -1 0 0x000001f0 - 0x000001ff (0x10) IX[B]E
[17] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]E
[18] -1 0 0x00001840 - 0x0000187f (0x40) IX[B]E
[19] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B)
(II) PCI I/O resource overlap reduced 0x00003000 from 0x000030ff to 0x0000303f
(II) PCI Memory resource overlap reduced 0xd0200000 from 0xd03fffff to 0xd0200fff
(II) PCI I/O resource overlap reduced 0x00001800 from 0x000018ff to 0x0000181f
(II) PCI I/O resource overlap reduced 0x00001840 from 0x0000187f to 0x0000185f
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd0200000 - 0xd0200fff (0x1000) MX[B]E
[1] -1 0 0xd0204000 - 0xd0207fff (0x4000) MX[B]E
[2] -1 0 0xd0201000 - 0xd0201fff (0x1000) MX[B]E
[3] -1 0 0xd0210000 - 0xd021ffff (0x10000) MX[B]E
[4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]EO
[5] -1 0 0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
[6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[7] -1 0 0x00003000 - 0x0000303f (0x40) IX[B]E
[8] -1 0 0x00003040 - 0x0000307f (0x40) IX[B]E
[9] -1 0 0x00001880 - 0x000018ff (0x80) IX[B]E
[10] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]E
[11] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]E
[12] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]E
[13] -1 0 0x00000374 - 0x00000377 (0x4) IX[B]E
[14] -1 0 0x00000170 - 0x0000017f (0x10) IX[B]E
[15] -1 0 0x000003f4 - 0x000003f7 (0x4) IX[B]E
[16] -1 0 0x000001f0 - 0x000001ff (0x10) IX[B]E
[17] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]E
[18] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]E
[19] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd0200000 - 0xd0200fff (0x1000) MX[B]E
[6] -1 0 0xd0204000 - 0xd0207fff (0x4000) MX[B]E
[7] -1 0 0xd0201000 - 0xd0201fff (0x1000) MX[B]E
[8] -1 0 0xd0210000 - 0xd021ffff (0x10000) MX[B]E
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]EO
[10] -1 0 0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
[11] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x00003000 - 0x0000303f (0x40) IX[B]E
[15] -1 0 0x00003040 - 0x0000307f (0x40) IX[B]E
[16] -1 0 0x00001880 - 0x000018ff (0x80) IX[B]E
[17] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]E
[18] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]E
[19] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]E
[20] -1 0 0x00000374 - 0x00000377 (0x4) IX[B]E
[21] -1 0 0x00000170 - 0x0000017f (0x10) IX[B]E
[22] -1 0 0x000003f4 - 0x000003f7 (0x4) IX[B]E
[23] -1 0 0x000001f0 - 0x000001ff (0x10) IX[B]E
[24] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]E
[25] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]E
[26] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B)
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "xie"
(WW) Warning, couldn't open module xie
(II) UnloadModule: "xie"
(EE) Failed to load module "xie" (module does not exist, 0)
(II) LoadModule: "pex5"
(WW) Warning, couldn't open module pex5
(II) UnloadModule: "pex5"
(EE) Failed to load module "pex5" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/freebsd/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DEC-XTRAP
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.1
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.7.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 6.5.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) ATI: ATI driver (version 6.5.6) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP),
ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon 9200PRO 5960 (AGP), ATI Radeon 9200 5961 (AGP),
ATI Radeon 9200 5962 (AGP), ATI Radeon 9200SE 5964 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9700 NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
ATI FireGL RV360 AV (AGP), ATI Radeon Mobility 9600 (M10) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2 (M11) NV (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP)
(II) Primary Device is: PCI 01:00:0
(II) ATI: Candidate "Device" section "Card0".
(--) Chipset ATI Radeon Mobility M6 LY (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd0200000 - 0xd0200fff (0x1000) MX[B]E
[6] -1 0 0xd0204000 - 0xd0207fff (0x4000) MX[B]E
[7] -1 0 0xd0201000 - 0xd0201fff (0x1000) MX[B]E
[8] -1 0 0xd0210000 - 0xd021ffff (0x10000) MX[B]E
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]EO
[10] -1 0 0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
[11] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x00003000 - 0x0000303f (0x40) IX[B]E
[15] -1 0 0x00003040 - 0x0000307f (0x40) IX[B]E
[16] -1 0 0x00001880 - 0x000018ff (0x80) IX[B]E
[17] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]E
[18] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]E
[19] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]E
[20] -1 0 0x00000374 - 0x00000377 (0x4) IX[B]E
[21] -1 0 0x00000170 - 0x0000017f (0x10) IX[B]E
[22] -1 0 0x000003f4 - 0x000003f7 (0x4) IX[B]E
[23] -1 0 0x000001f0 - 0x000001ff (0x10) IX[B]E
[24] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]E
[25] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]E
[26] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B)
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) Module radeon: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 4.0.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd0200000 - 0xd0200fff (0x1000) MX[B]E
[6] -1 0 0xd0204000 - 0xd0207fff (0x4000) MX[B]E
[7] -1 0 0xd0201000 - 0xd0201fff (0x1000) MX[B]E
[8] -1 0 0xd0210000 - 0xd021ffff (0x10000) MX[B]E
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]EO
[10] -1 0 0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
[11] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x00003000 - 0x0000303f (0x40) IX[B]E
[18] -1 0 0x00003040 - 0x0000307f (0x40) IX[B]E
[19] -1 0 0x00001880 - 0x000018ff (0x80) IX[B]E
[20] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]E
[21] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]E
[22] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]E
[23] -1 0 0x00000374 - 0x00000377 (0x4) IX[B]E
[24] -1 0 0x00000170 - 0x0000017f (0x10) IX[B]E
[25] -1 0 0x000003f4 - 0x000003f7 (0x4) IX[B]E
[26] -1 0 0x000001f0 - 0x000001ff (0x10) IX[B]E
[27] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]E
[28] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]E
[29] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B)
[30] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[31] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0xd0100000
Fatal server error:
xf86MapVidMem: Address 0xd0100000 outside allowable range
Please consult the The X.Org Foundation support
at http://wiki.X.Org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
--y0ulUmNC+osPPQO6--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040910183905.GA21674>