Date: Wed, 16 Apr 2003 20:52:57 +0200 From: Gary Jennejohn <garyj@jennejohn.org> To: "Christoph P. Kukulies" <kuku@physik.rwth-aachen.de> Cc: garyj@jennejohn.org Subject: Re: ok - 62 Eur bought me back again into isdn under 5.0 Message-ID: <200304161852.h3GIqvU2008903@peedub.jennejohn.org> In-Reply-To: Message from "Christoph P. Kukulies" <kuku@physik.rwth-aachen.de> <20030416172102.GA13487@gilberto.physik.rwth-aachen.de>
next in thread | previous in thread | raw e-mail | index | archive | help
"Christoph P. Kukulies" writes: > http://mozart.physik.rwth-aachen.de/~kuku/messages.gz > > Watch all these timeouts. To me it doesn't tell much at the moment. > But Hellmuth may know. Or Gary perhaps. > Apr 16 18:19:43 monk kernel: i4b-L1 ifpi2_isacsx_exir_hdlr: EXIRQ Rx Frame Overf low Apr 16 18:19:43 monk kernel: i4b-L1 avma1pp2_intr: stat 49 Apr 16 18:19:43 monk kernel: i4b-L1 avma1pp2_intr: ISAC Apr 16 18:19:43 monk kernel: i4b-L1 ifpi2_isacsx_irq: unit 0: ista = 0x01 Apr 16 18:19:43 monk kernel: i4b-L1 ifpi2_isacsx_irq: unit 0: istad = 0x80 Apr 16 18:19:43 monk kernel: i4b-L1 ifpi2_isacsx_irq: unit 0: Data Overrun error Apr 16 18:19:43 monk kernel: i4b-L1 avma1pp2_intr: stat 48 Apr 16 18:19:45 monk kernel: i4b-L3 T303_timeout: SETUP not answered, cr = 14 The overflow looks like the culprit to me. This is most probably the cause of the SETUP error which appears to lead to all the other problems. This could be due to your having too much trace turned on, such that all the kernel printf's are screwing up the timing. I haven't used the Fritz 2 under -current yet (I've used a Fritz 1 OK) because I can't find my card. I know the Fritz 1 works. Want to swap? Then I could debug the Fritz 2 driver. --- Gary Jennejohn / garyj@jennejohn.org gj@freebsd.org gj@denx.de
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200304161852.h3GIqvU2008903>