Date: Thu, 6 Nov 2014 13:26:51 -0800 From: John-Mark Gurney <jmg@funkthat.com> To: Dante =?iso-8859-1?Q?F=2E_B=2E_Col=F2?= <dante01010@gmail.com> Cc: freebsd-net@freebsd.org Subject: Re: Static routes issue Message-ID: <20141106212651.GK24601@funkthat.com> In-Reply-To: <545BE687.3070506@gmail.com> References: <545BE687.3070506@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
"Dante F. B. Col" wrote this message on Thu, Nov 06, 2014 at 19:22 -0200: > I'm trying to setup some static routes on a freebsd box for some public > addresses , the machine has two ethernet cards *em0 *and *em1 ***, *em0* > is attached to a Cisco internet router and *em1* is connected to a > switch, both interfaces have public addresses of the same range , *em1 > *appears has absolutely no communication , i took a look at the static > routes and there is a route for the subnet that it goes to *em0* , i'm > trying to add a static route for the ip address pointing to the***em1 > *without pass gateway using *-iface* parameter but always returns > "Network unreachble", someone can help me or give some tips to address > this ? for many here this is probably a nooby question, we also have > some firewall Linux boxes that i'm gonna migrate to freebsd (also trying > on openbsd with the same problem) but first i have to solve this. Sounds like you're looking for multipath routing... This requires the kernel to be recompiled w/ the option RADIX_MPATH.. By default, FreeBSD does not support having the same route to two different interfaces.. Hope this helps... -- John-Mark Gurney Voice: +1 415 225 5579 "All that I will do, has been done, All that I have, has not."
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20141106212651.GK24601>