Date: Mon, 20 Oct 1997 16:52:32 -0500 From: Chad Hurley <hurleyc@rferl.org> To: questions@freebsd.org Subject: ThinNet to 10 Base-T Message-ID: <l03110709b07181e5652c@[206.241.68.123]>
next in thread | raw e-mail | index | archive | help
Hello--
I am having problems switching my network from ThinNet to 10 Base-T. It is
a Kingston combo card running at the de0 address. I thought it was
auto-sensing but apparently there is something I need to set in FreeBSD.
Can anyone tell me how I change the connection setting from BNC to 10
Base-T?
The following is the dmesg.
Thanks for any help.
Chad Hurley
******************************************************************************
FreeBSD 2.2.2-RELEASE #0: Mon Oct 20 16:27:59 EDT 1997
hurleyc@frbsd.rferl.org:/usr/src/sys/compile/FRBSD
CPU: Pentium (149.69-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping=12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 33554432 (32768K bytes)
avail memory = 30486528 (29772K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82439> rev 1 on pci0:0
chip1 <Intel 82371SB PCI-ISA bridge> rev 0 on pci0:7:0
chip2 <Intel 82371SB IDE interface> rev 0 on pci0:7:1
de0 <Digital 21041 Ethernet> rev 17 int a irq 10 on pci0:11
de0: 21041 [10Mb/s] pass 1.1
de0: address 00:c0:f0:14:f9:d5
vga0 <VGA-compatible display device> rev 67 int a irq 11 on pci0:12
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <FUJITSU M1636TAU>
wd0: 1225MB (2509920 sectors), 2490 cyls, 16 heads, 63 S/T, 512 B/S
de0: enabling BNC port
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?l03110709b07181e5652c>