Date: Fri, 27 Jul 2001 15:47:36 -0400 (EDT) From: Doug Denault <doug@safeport.com> To: "P. U. (Uli) Kruppa" <root@pukruppa.de> Cc: Vladislav Saltanov <saltanov@mail.ru>, freebsd-questions@FreeBSD.ORG Subject: Re: modem doesn't work in PPP Message-ID: <Pine.BSF.3.96.1010727154607.55553B-100000@fledge.watson.org> In-Reply-To: <20010720093430.N7390-100000@localhost.de>
next in thread | previous in thread | raw e-mail | index | archive | help
If you have not fixed this yet. If you are using 4.3, try /dev/cuaa4. On Fri, 20 Jul 2001, P. U. (Uli) Kruppa wrote: > Hi! > > Not that I really do know what I am talking about: > They say ppp uses "pseudo-devices": > for your fisrst serial port (com1) this would be > set device /dev/cuaa0 > for the second > set device /dev/cuaa1 > etc... > > Good luck! > > Uli. > > On Fri, 20 Jul 2001, Vladislav Saltanov wrote: > > > Date: Fri, 20 Jul 2001 09:47:29 +0300 > > From: Vladislav Saltanov <saltanov@mail.ru> > > To: freebsd-questions@FreeBSD.ORG > > Subject: modem doesn't work in PPP > > > > Help me, please. > > > > When I start ppp in interactive mode, after > > > > set device /dev/sio4 > > set speed 115200 > > term > > > > I see the following: > > > > Jul 20 08:48:46 ppp[348]: Warning: deflink: /dev/sio4: Bad file > > descriptor > > Failed to open /dev/sio4 > > > > > > > > However when system is being loaded it writes: > > > > Jul 20 08:26:18 /kernel: sio4: <Modem/Fax/Voice> at port 0x3e8-0x3ef irq > > 10 on isa0 > > Jul 20 08:26:18 /kernel: sio4: type 16550A > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > > *--------------------------------------* > | www.pukruppa.de www.2000d.de | > | Wuppertal - Germany | > *--------------------------------------* > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.1010727154607.55553B-100000>