Date: Tue, 19 May 2020 11:01:36 +0200 (CEST) From: Ronald Klop <ronald-lists@klop.ws> To: David Mehler <dave.mehler@gmail.com> Cc: freebsd-arm@freebsd.org Subject: Re: FreeBSD 12.1 on Raspberry Pi 3B+, completely headless? Message-ID: <779350437.1.1589878896066@localhost> In-Reply-To: <CAPORhP70pXC-_o_us4crY3wdfvRxNM1%2BnTiE220Bwf7SaBtkXg@mail.gmail.com> References: <CAPORhP4wTqc0xZLatb=K0TozrAYogE7qXQ6Bw5WAynhAzW-QPQ@mail.gmail.com> <20200518184007.GA64715@www.zefox.net> <CAPORhP6gqvp_MSxsO9__C-EvXcEpRfVwYW1HnujFL_TpNXnNfw@mail.gmail.com> <20200518213741.GA65006@www.zefox.net> <CAPORhP70pXC-_o_us4crY3wdfvRxNM1%2BnTiE220Bwf7SaBtkXg@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, I connected my RPI3B+ with a USB-to-serial cable so I can look at boot messages and interact with the boot process. Something like this, but maybe from a store in your country. https://www.reichelt.nl/raspberry-pi-usb-naar-ttl-0-9-m-pl2303hx-pl2303hx-rpi-usb-ttl-p150567.html?PROVID=2788&gclid=EAIaIQobChMI3OGn48e_6QIVFtZ3Ch3Crg9eEAQYASABEgLvxvD_BwE&&r=1 Regards, Ronald. Van: David Mehler <dave.mehler@gmail.com> Datum: dinsdag, 19 mei 2020 00:10 Aan: bob prohaska <fbsd@www.zefox.net> CC: freebsd-arm@freebsd.org Onderwerp: Re: FreeBSD 12.1 on Raspberry Pi 3B+, completely headless? > > Hello, > > Thanks for the confirmation that onboard ethernet works. I've booted > the pi and I'm not seeing it on the network. I've tried mounting the > freebsd partition under a linux virtual machine which it's fdisk shows > it as /dev/sdd2 later in the display shows it up as 15. I can not get > it to mount so am not sure what rc.conf is doing, I was hoping it > would get a dhcp address since it's plugged directly in. I also did > add a blank ssh file to the /dev/sdd1 partition. > > Suggestions? > > Thanks. > Dave. > > > On 5/18/20, bob prohaska <fbsd@www.zefox.net> wrote: > > On Mon, May 18, 2020 at 05:25:40PM -0400, David Mehler wrote: > >> Hello, > >> > >> Does the onboard ethernet on the pi 3b+ work or do I have to go USB > >> wireless all the way? > >> > > Wired ethernet works fine on the 3B, I believe the + is the same. > > > > hth, > > > > bob prohaska > > > >> Thanks. > >> Dave. > >> > >> > >> On 5/18/20, bob prohaska <fbsd@www.zefox.net> wrote: > >> > On Mon, May 18, 2020 at 01:02:32PM -0400, David Mehler wrote: > >> >> Hello, > >> >> > >> >> I've got a Raspberry Pi 3b+ that I'd like to put FreeBSD 12.1 on. It > >> >> is completely headless the only thing it has is it's power connection. > >> >> I have downloaded and wrote to sd the latest 12.1 amd64 rpi3 image. > >> > ^^^ > >> > Typo? > >> > > >> _______________________________________________ > >> freebsd-arm@freebsd.org mailing list > >> https://lists.freebsd.org/mailman/listinfo/freebsd-arm > >> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" > > > _______________________________________________ > freebsd-arm@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" > > > From owner-freebsd-arm@freebsd.org Tue May 19 10:04:50 2020 Return-Path: <owner-freebsd-arm@freebsd.org> Delivered-To: freebsd-arm@mailman.nyi.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1]) by mailman.nyi.freebsd.org (Postfix) with ESMTP id 17BB82CA403 for <freebsd-arm@mailman.nyi.freebsd.org>; Tue, 19 May 2020 10:04:50 +0000 (UTC) (envelope-from dave.mehler@gmail.com) Received: from mail-io1-xd41.google.com (mail-io1-xd41.google.com [IPv6:2607:f8b0:4864:20::d41]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256 client-signature RSA-PSS (2048 bits) client-digest SHA256) (Client CN "smtp.gmail.com", Issuer "GTS CA 1O1" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 49RBM45mrWz4K9r for <freebsd-arm@freebsd.org>; Tue, 19 May 2020 10:04:48 +0000 (UTC) (envelope-from dave.mehler@gmail.com) Received: by mail-io1-xd41.google.com with SMTP id k18so13949177ion.0 for <freebsd-arm@freebsd.org>; Tue, 19 May 2020 03:04:48 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=mime-version:in-reply-to:references:from:date:message-id:subject:to :cc; bh=0zHIIM95az1p3VCJkcLFxqjRjhVEBsxhBP/qFISu4hM=; b=tCX6ILAZzlAPMkvcIuJA5PhXn1RjhFWSy4l66yJBK+nWYUuVZF+e7VvkxxRfHXPLoz pTkupZigjzrPdPSqToWD/GoJzPx4+an5bQIYLOXDscidMAiS8yprpa4nkE6aD09dPb+7 skVyENYyKGxjieJ7tQKhfzD4uuNhQNl1S3ezkZfDaXSB9ZZVvcReQdEiEf404wp6qy1h EnIlymBZ81UPV+B20/0PH0Iha5ht0NSVAr7TQXb38ShWuHsajM/Er8hslwfExnh5eCFJ iz1KrE/CL393xvwJuzHv0Qr2NBC/bPLoqOrSA6byCzmZUABqgKecWhX/It5iS7nE0w2R iwgQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:in-reply-to:references:from:date :message-id:subject:to:cc; bh=0zHIIM95az1p3VCJkcLFxqjRjhVEBsxhBP/qFISu4hM=; b=Dbld5Ug434StdHB3e9nfrr+4m3cMHuFoTYnYsjHVPpBPx3bS4XkTdmDhtSEI2dqITQ iPbX92QZoVRBmIxBlhkrv2ZyhoZGEy7DqY1Xfg+hyzZ0819yWGAMdTkCKX5Ymeo9m2BP QMPR6AH8lQSXE7Y4LXyXP28uMI0eE9Ht0iS6UjVxFCBp5GtE2QmmRBbdPkz9eprz9RyU ok/hm5lt0P1Zm80HqhpES/rtuop4zzm3ONsbt0vm7D24mzfFyhnpo3hc6VXppoMhW0cj tmE2Nkjs14xbMC0OaCZDweWslDh82rE3Zv2btcgArLZ1KjWljYKiCQq1FQ0PuSdertaz 01SA== X-Gm-Message-State: AOAM532zfQNLFunjtm2Xf+je8RpoT9dVAHtrEQwdqOuumtkQxin5qWWC N7ulauFzckUo65HBURvMcD4A/9RKdMFhDOsn1D2zlYPC X-Google-Smtp-Source: ABdhPJzBywTA9sPaH7fqK4KCurJ3kYx2yAUpAwHL8ZwwpQDTdmEfmc42DidzQeXo+S64Lgz983TMfbzDUdaNbMw8M/M= X-Received: by 2002:a02:5e81:: with SMTP id h123mr17777138jab.99.1589882687665; Tue, 19 May 2020 03:04:47 -0700 (PDT) MIME-Version: 1.0 Received: by 2002:a4f:6cf:0:0:0:0:0 with HTTP; Tue, 19 May 2020 03:04:47 -0700 (PDT) In-Reply-To: <20200518235138.GB65006@www.zefox.net> References: <CAPORhP4wTqc0xZLatb=K0TozrAYogE7qXQ6Bw5WAynhAzW-QPQ@mail.gmail.com> <20200518184007.GA64715@www.zefox.net> <CAPORhP6gqvp_MSxsO9__C-EvXcEpRfVwYW1HnujFL_TpNXnNfw@mail.gmail.com> <20200518213741.GA65006@www.zefox.net> <CAPORhP70pXC-_o_us4crY3wdfvRxNM1+nTiE220Bwf7SaBtkXg@mail.gmail.com> <20200518235138.GB65006@www.zefox.net> From: David Mehler <dave.mehler@gmail.com> Date: Tue, 19 May 2020 06:04:47 -0400 Message-ID: <CAPORhP7jetavYhvZ2ZJf0T3p6yGwQHjUC0r9Jm89=+q-A8JHDw@mail.gmail.com> Subject: Re: FreeBSD 12.1 on Raspberry Pi 3B+, completely headless? To: bob prohaska <fbsd@www.zefox.net> Cc: freebsd-arm@freebsd.org Content-Type: text/plain; charset="UTF-8" X-Rspamd-Queue-Id: 49RBM45mrWz4K9r X-Spamd-Bar: - Authentication-Results: mx1.freebsd.org; dkim=pass header.d=gmail.com header.s=20161025 header.b=tCX6ILAZ; dmarc=pass (policy=none) header.from=gmail.com; spf=pass (mx1.freebsd.org: domain of davemehler@gmail.com designates 2607:f8b0:4864:20::d41 as permitted sender) smtp.mailfrom=davemehler@gmail.com X-Spamd-Result: default: False [-1.29 / 15.00]; ARC_NA(0.00)[]; NEURAL_HAM_MEDIUM(-0.77)[-0.771]; R_DKIM_ALLOW(-0.20)[gmail.com:s=20161025]; RCVD_TLS_ALL(0.00)[]; FROM_HAS_DN(0.00)[]; TO_DN_SOME(0.00)[]; R_SPF_ALLOW(-0.20)[+ip6:2607:f8b0:4000::/36:c]; FREEMAIL_FROM(0.00)[gmail.com]; MIME_GOOD(-0.10)[text/plain]; PREVIOUSLY_DELIVERED(0.00)[freebsd-arm@freebsd.org]; DWL_DNSWL_NONE(0.00)[gmail.com:dkim]; TO_MATCH_ENVRCPT_SOME(0.00)[]; DKIM_TRACE(0.00)[gmail.com:+]; RCPT_COUNT_TWO(0.00)[2]; DMARC_POLICY_ALLOW(-0.50)[gmail.com,none]; RCVD_IN_DNSWL_NONE(0.00)[2607:f8b0:4864:20::d41:from]; NEURAL_HAM_SHORT(-0.52)[-0.522]; FROM_EQ_ENVFROM(0.00)[]; MIME_TRACE(0.00)[0:+]; SUBJECT_ENDS_QUESTION(1.00)[]; ASN(0.00)[asn:15169, ipnet:2607:f8b0::/32, country:US]; TAGGED_FROM(0.00)[]; FREEMAIL_ENVFROM(0.00)[gmail.com]; RCVD_COUNT_TWO(0.00)[2] X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.33 Precedence: list List-Id: "Porting FreeBSD to ARM processors." <freebsd-arm.freebsd.org> List-Unsubscribe: <https://lists.freebsd.org/mailman/options/freebsd-arm>, <mailto:freebsd-arm-request@freebsd.org?subject=unsubscribe> List-Archive: <http://lists.freebsd.org/pipermail/freebsd-arm/> List-Post: <mailto:freebsd-arm@freebsd.org> List-Help: <mailto:freebsd-arm-request@freebsd.org?subject=help> List-Subscribe: <https://lists.freebsd.org/mailman/listinfo/freebsd-arm>, <mailto:freebsd-arm-request@freebsd.org?subject=subscribe> X-List-Received-Date: Tue, 19 May 2020 10:04:50 -0000 Hello, I'll look in to a monitor and keyboard, but given where the Pi is that could a bit getting one there. One thing I thought of is do I have the right image? If it's suppose to boot, and at least get an ip and respond to ping, but if it's getting stuck in single-user mode then maybe my image is wrong. This is the filename of the image I wrote to the sd card for the Pi: FreeBSD-12.1-RELEASE-arm64-aarch64-RPI3.img Thanks. Dave. On 5/18/20, bob prohaska <fbsd@www.zefox.net> wrote: > On Mon, May 18, 2020 at 06:10:41PM -0400, David Mehler wrote: >> Hello, >> >> Thanks for the confirmation that onboard ethernet works. I've booted >> the pi and I'm not seeing it on the network. I've tried mounting the >> freebsd partition under a linux virtual machine which it's fdisk shows >> it as /dev/sdd2 later in the display shows it up as 15. I can not get >> it to mount so am not sure what rc.conf is doing, I was hoping it >> would get a dhcp address since it's plugged directly in. I also did >> add a blank ssh file to the /dev/sdd1 partition. >> >> Suggestions? >> > > Have you tried plugging in a monitor and keyboard temporarily, just > to see what's going on? My guess is that it's getting stuck in single- > user mode, or maybe not booting at all for some reason. It definitely > should pick up a DHCP connection if it gets to multi-user. I'd expect > that to answer ping if nothing else. > > My only experience re Linux is with Raspbian, and Raspbian absolutely > cannot mount ufs filesystems, so what you're seeing seems normal. > > hth, > > bob prohaska > >> Thanks. >> Dave. >> >> >> On 5/18/20, bob prohaska <fbsd@www.zefox.net> wrote: >> > On Mon, May 18, 2020 at 05:25:40PM -0400, David Mehler wrote: >> >> Hello, >> >> >> >> Does the onboard ethernet on the pi 3b+ work or do I have to go USB >> >> wireless all the way? >> >> >> > Wired ethernet works fine on the 3B, I believe the + is the same. >> > >> > hth, >> > >> > bob prohaska >> > >> >> Thanks. >> >> Dave. >> >> >> >> >> >> On 5/18/20, bob prohaska <fbsd@www.zefox.net> wrote: >> >> > On Mon, May 18, 2020 at 01:02:32PM -0400, David Mehler wrote: >> >> >> Hello, >> >> >> >> >> >> I've got a Raspberry Pi 3b+ that I'd like to put FreeBSD 12.1 on. >> >> >> It >> >> >> is completely headless the only thing it has is it's power >> >> >> connection. >> >> >> I have downloaded and wrote to sd the latest 12.1 amd64 rpi3 image. >> >> > ^^^ >> >> > Typo? >> >> > >> >> _______________________________________________ >> >> freebsd-arm@freebsd.org mailing list >> >> https://lists.freebsd.org/mailman/listinfo/freebsd-arm >> >> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" >> > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?779350437.1.1589878896066>