Date: Mon, 30 Apr 2001 11:15:28 +0200 (CEST) From: "Hartmann, O." <ohartman@klima.physik.uni-mainz.de> To: <freebsd-smp@freebsd.org> Cc: <freebsd-stable@freebsd.org> Subject: Unknown PCI device on TYAN Thunder 2500 w. AMI MegaRAID Message-ID: <Pine.BSF.4.33.0104301108160.88611-100000@klima.physik.uni-mainz.de>
next in thread | raw e-mail | index | archive | help
Dear Sirs.
Yesterday I posted a message about spontanous reboots on one of our
TYAN 2500 based SMP machines. In one respind I was told that there is
an unknown PCI device and I see, he was right.
The unknown PCI device belongs to Q-Logic - and that is the vendor
of the SCSI chipset on the AMI MegaRAID Enterprise 1600 we use.
Here is the dmesg-output:
opyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #76: Mon Apr 30 10:51:10 CEST 2001
root@atmos.physik.uni-mainz.de:/usr/obj/usr/src/sys/ATMOS
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (868.64-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 2147483648 (2097152K bytes)
avail memory = 2088067072 (2039128K bytes)
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 3, version: 0x000f0011, at 0xfec01000
Preloaded elf kernel "kernel" at 0xc0383000.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #1 intpin 13 -> irq 2
IOAPIC #1 intpin 12 -> irq 16
IOAPIC #1 intpin 7 -> irq 17
pci0: <PCI bus> on pcib0
pcib3: <PCI to PCI bridge (vendor=1166 device=0005)> at device 0.1 on pci0
IOAPIC #1 intpin 1 -> irq 18
pci1: <PCI bus> on pcib3
pci1: <NVidia Riva TNT2 graphics accelerator> at 0.0 irq 18
sym0: <896> port 0xf800-0xf8ff mem 0xfeafe000-0xfeafffff,0xfeafac00-0xfeafafff irq 2 at device 1.0 on pci0
sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym1: <896> port 0xf400-0xf4ff mem 0xfeafc000-0xfeafdfff,0xfeafa800-0xfeafabff irq 16 at device 1.1 on pci0
sym1: Symbios NVRAM, ID 7, Fast-40, SE, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
sym1: handling phase mismatch from SCRIPTS.
pcib5: <DEC 21154 PCI-PCI bridge> at device 3.0 on pci0
IOAPIC #1 intpin 2 -> irq 19
pci2: <PCI bus> on pcib5
pcib6: <DEC 21154 PCI-PCI bridge> at device 0.0 on pci2
IOAPIC #1 intpin 0 -> irq 20
pci3: <PCI bus> on pcib6
amr0: <AMI MegaRAID> mem 0xf4000000-0xf7ffffff irq 20 at device 0.0 on pci3
amr0: <Series 471 40 Logical Drive Firmware> Firmware C158, BIOS 3.11, 64MB RAM
===>> pci2: <unknown card> (vendor=0x1077, dev=0x1216) at 1.0 irq 18
===>> pci2: <unknown card> (vendor=0x1077, dev=0x1216) at 2.0 irq 19
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xfcc0-0xfcff mem 0xfe900000-0xfe9fffff,0xfeaf9000-0xfeaf9fff irq 17 at device 7.0 on pci0
fxp0: Ethernet address 00:e0:81:00:f0:d7
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
pci0: <Unknown PCI ATA controller> at 15.1
pcib1: <ServerWorks NB6536 2.0HE host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib1
pcib2: <ServerWorks host to PCI bridge> on motherboard
pci5: <PCI bus> on pcib2
pcib4: <ServerWorks host to PCI bridge> on motherboard
pci6: <PCI bus> on pcib4
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <8 virtual consoles, flags=0x200>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 flags 0x10 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 drq 1 flags 0x8 on isa0
ppc0: SMC-like chipset (ECP-only) in ECP mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
DUMMYNET initialized (010124)
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, unlimited logging
IPsec: Initialized Security Association Processing.
Waiting 4 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
amrd0: <MegaRAID logical drive> on amr0
amrd0: 245014MB (501788672 sectors) RAID 5 (optimal)
SMP: AP CPU #1 Launched!
sa0 at sym1 bus 0 target 5 lun 0
sa0: <HP C5713A H910> Removable Sequential Access SCSI-2 device
sa0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit)
no devsw (majdev=0 bootdev=0xa0200000)
Mounting root from ufs:/dev/amrd0s1a
cd0 at sym1 bus 0 target 3 lun 0
cd0: <TEAC CD-ROM CD-532S 1.0A> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 16)
cd0: cd present [329963 x 2048 byte records]
ch0 at sym1 bus 0 target 5 lun 1
ch0: <HP C5713A H910> Removable Changer SCSI-2 device
ch0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit)
ch0: 6 slots, 1 drive, 0 pickers, 0 portals
link_elf: symbol splash_register undefined
fxp0: promiscuous mode enabled
What the heck is that? I was told that the AMI MegaRAID controllers
are supported, what's up with this?
On another SMP machine based on ASUS CUA4X-D, we use the AMI Elite 1600,
and there is no 'unknown' device.
On the TYAN based machine, ATA is diasabled as well as USB and sound.
Can some help please?
--
MfG
O. Hartmann
ohartman@klima.physik.uni-mainz.de
----------------------------------------------------------------
IT-Administration des Institut fuer Physik der Atmosphaere (IPA)
----------------------------------------------------------------
Johannes Gutenberg Universitaet Mainz
Becherweg 21
55099 Mainz
Tel: +496131/3924662 (Maschinensaal)
Tel: +496131/3924144
FAX: +496131/3923532
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.33.0104301108160.88611-100000>