Date: Wed, 29 Nov 2000 13:32:38 +1030 From: Greg Lehey <grog@lemis.com> To: "Daniel O'Connor" <doconnor@gsoft.com.au> Cc: freebsd-stable@FreeBSD.ORG Subject: Re: Epox EP-8KTA+ and Advansys 3940-U2W Message-ID: <20001129133238.A46523@echunga.lemis.com> In-Reply-To: <XFMail.001129131859.doconnor@gsoft.com.au>; from doconnor@gsoft.com.au on Wed, Nov 29, 2000 at 01:18:59PM %2B1030 References: <XFMail.001129131859.doconnor@gsoft.com.au>
next in thread | previous in thread | raw e-mail | index | archive | help
[Format recovered--see http://www.lemis.com/email/email-format.html] On Wednesday, 29 November 2000 at 13:18:59 +1030, Daniel O'Connor wrote: > Now my problem is that the > adw0: <AdvanSys 38C0800 Ultra2 SCSI Adapter> port 0xb800-0xb8ff mem > 0xd8005000-0xd80050ff irq 5 at device 8.0 on pci0 > adw0: SCSI ID 7, High & Low SE Term Enabled, Queue Depth 253 > > Is detecting my AIT tape like so -> > sa0 at adw0 bus 0 target 4 lun 0 > sa0: <SONY SDX-300C 0400> Removable Sequential Access SCSI-2 device > sa0: 6.600MB/s transfers (16bit) > > Whereas another machine with an Adaptec 7895 detects it like so -> > sa0 at ahc1 bus 0 target 4 lun 0 > sa0: <SONY SDX-300C 0400> Removable Sequential Access SCSI2 device > sa0: 20.0MB/s transfers (10.0MHz, offset 8, 16bit) > > The media speed is only 3meg a second uncompressed, so it's not a > big issue but I am just curious if it is really that slow or not. (I > would do a test by dd'ing /dev/zero to it when compression is on but > I don't have any spare tapes <sigh>) Have you checked the host adaptor settings? > I also have a Diamond Touch keyboard (with the crappy > power/wakeup/sleep keys) which doesn't get detected if atkbdc0 has > flags 0x1 set :( Hmm. I have one of those too, and have used it with my 7KXA with no problems. But I haven't tried the keyboard flags. Are you sure this isn't simply a bug in the keyboard driver? Greg -- Finger grog@lemis.com for PGP public key See complete headers for address and phone numbers To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20001129133238.A46523>