Date: Tue, 4 May 2004 17:17:53 -0700 (PST) From: Mechael Black <mblack@panaso.com> To: freebsd-scsi@freebsd.org Subject: Dell 1750, mpt0/multiple disks + boot failure Message-ID: <0405041704360.75876@neobe.cnanfb.pbz>
next in thread | raw e-mail | index | archive | help
Is there any fix or work around to using multiple SCSI disks in a 1750? I ran across the thread below dated Dec/2003 - but there does not appear to have been much followup. http://lists.freebsd.org/pipermail/freebsd-scsi/2003-December/000871.html Would appreciate any input. Thanks, -mblack FreeBSD 4.9-RELEASE mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xcc00-0xccff mem 0xfcd20000-0xfcd2ffff,0xfcd30000-0xfcd3 ffff irq 7 at device 5.0 on pci4 mpt1: <LSILogic 1030 Ultra4 Adapter> port 0xc800-0xc8ff mem 0xfcd00000-0xfcd0ffff,0xfcd10000-0xfcd1 ffff irq 5 at device 5.1 on pci4 pass1 at mpt0 bus 0 target 6 lun 0 pass1: <PE/PV 1x3 SCSI BP 1.1> Fixed Processor SCSI-2 device pass1: 3.300MB/s transfers da0 at mpt0 bus 0 target 0 lun 0 da0: <IBM IC35L036UCDY10-0 S27F> Fixed Direct Access SCSI-3 device da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?0405041704360.75876>