Date: Sat, 26 Jan 2002 13:21:08 +0100 From: Simon Siemonsma <simon.freebsd@hccnet.nl> To: devin-freebsdquestions@rintrah.org Cc: freebsd-questions@freebsd.org Subject: Re: kmymoney2 fails to build Message-ID: <20020126122108.E777D1AB@fia168-94.dsl.hccnet.nl> In-Reply-To: <20020124131112.A42220@tharmas.rintrah.org> References: <20020124131112.A42220@tharmas.rintrah.org>
next in thread | previous in thread | raw e-mail | index | archive | help
When I try to build kmymoney2 on my system I get different messages at the
point where you get your problems. See attached Kword file.
It seems like you do have autoconf, which I seem not to have and because of
that my installation succeeds in getting a few step further than yours.
Just compare and see if it helps you.
Simon Siemonsma
On Thursday 24 January 2002 19:11, you wrote:
> kmymoney keeps failing for me. I'm using the ports cvsuped from
> last night running on Freebsd 4.5-RC. All the dependencies were
> installed 3 or 4 days ago from the then current ports, but
> the build failed then in the same way. I'm stumped.
>
> Any ideas?
>
> Thanks,
> --devin
>
>
>
> attached is the output from 'make install' in /usr/ports/
>
> Script started on Thu Jan 24 12:50:23 2002
> # make install
> ===> Extracting for kmymoney2-0.3.6
>
> >> Checksum OK for kmymoney2-0.3.6.tar.bz2.
>
> ===> kmymoney2-0.3.6 depends on executable: gmake - found
> ===> kmymoney2-0.3.6 depends on executable: autoconf213 - found
> ===> kmymoney2-0.3.6 depends on shared library: kdecore.4 - found
> ===> kmymoney2-0.3.6 depends on shared library: qt2.4 - found
> ===> Patching for kmymoney2-0.3.6
> ===> Applying FreeBSD patches for kmymoney2-0.3.6
> ===> Configuring for kmymoney2-0.3.6
> creating cache ./config.cache
> checking host system type... i386--freebsd4.5
> checking target system type... i386--freebsd4.5
> checking build system type... i386--freebsd4.5
> checking for a BSD compatible install... /usr/bin/install -c -o root -g
> wheel checking whether build environment is sane... yes
> checking whether gmake sets ${MAKE}... yes
> checking for working aclocal... found
> checking for working autoconf... found
> checking for working automake... found
> checking for working autoheader... found
> checking for working makeinfo... found
> checking for a C-Compiler... cc
> checking whether the C compiler (cc -O -pipe ) works... yes
> checking whether the C compiler (cc -O -pipe ) is a cross-compiler... no
> checking whether we are using GNU C... yes
> checking whether cc accepts -g... yes
> checking how to run the C preprocessor... cc -E
> checking for a C++-Compiler... c++
> checking whether the C++ compiler (c++ -O -pipe ) works... yes
> checking whether the C++ compiler (c++ -O -pipe ) is a cross-compiler...
> no checking whether we are using GNU C++... yes
> checking whether c++ accepts -g... yes
> checking whether c++ supports -fno-exceptions... yes
> checking whether c++ supports -fno-check-new... yes
> checking whether c++ supports -Wno-long-long... yes
> checking whether c++ supports -Wnon-virtual-dtor... yes
> checking whether c++ supports -fno-builtin... yes
> checking whether c++ supports -fexceptions... yes
> checking whether c++ supports -frtti... yes
> checking how to run the C++ preprocessor... c++ -E
> checking whether c++ supports -frepo... yes
> checking for ld used by GCC... /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking whether ln -s works... yes
> checking how to recognise dependant libraries... pass_all
> checking for ranlib... ranlib
> checking for strip... strip
> checking for Cygwin environment... no
> checking for mingw32 environment... no
> updating cache ./config.cache
> loading cache ./config.cache within ltconfig
> checking whether -lc should be explicitly linked in... (skipping, using no)
> no checking for objdir... .libs
> checking for cc option to produce PIC... -fPIC -DPIC
> checking if cc PIC flag -fPIC -DPIC works... yes
> checking if cc static flag -static works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -fno-rtti -fno-exceptions ... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared
> libraries... yes checking how to hardcode library paths into programs...
> immediate
> checking whether stripping libraries is possible... yes
> checking dynamic linker characteristics... freebsd4.5 ld.so
> checking command to parse /usr/bin/nm -B output... ok
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... no
> checking for dlopen in -ldl... no
> checking for dlopen... yes
> checking for dlfcn.h... yes
> checking whether a program can dlopen itself... yes
> checking whether a statically linked program can dlopen itself... no
> creating libtool
> updating cache ./config.cache
> loading cache ./config.cache
> loading cache ./config.cache within ltconfig
> checking host system type... i386--freebsd4.5
> checking build system type... i386--freebsd4.5
> ltcf-cxx: with_gcc=yes ; with_gnu_ld=yes
> checking for objdir... .libs
> checking for c++ option to produce PIC... -fPIC -DPIC
> checking if c++ PIC flag -fPIC -DPIC works... yes
> checking if c++ static flag -static works... yes
> checking if c++ supports -c -o file.o... yes
> checking if c++ supports -fno-rtti -fno-exceptions ... yes
> checking whether the linker (c++) supports shared libraries... yes
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking dynamic linker characteristics... freebsd4.5 ld.so
> checking command to parse /usr/bin/nm -B output... ok
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... no
> checking for dlfcn.h... (cached) yes
> checking whether a program can dlopen itself... (cached) yes
> checking whether a statically linked program can dlopen itself... (cached)
> no appending configuration tag "CXX" to libtool
> checking for object suffix... o
> checking for executable suffix... no
> checking for msgfmt... /usr/local/bin/msgfmt
> checking for gmsgfmt... /usr/local/bin/msgfmt
> checking for xgettext... /usr/local/bin/xgettext
> checking for main in -lcompat... yes
> checking for crypt in -lcrypt... yes
> checking for the third argument of getsockname... socklen_t
> checking for dnet_ntoa in -ldnet... no
> checking for dnet_ntoa in -ldnet_stub... no
> checking for inet_ntoa... yes
> checking for connect... yes
> checking for remove... yes
> checking for shmat... yes
> checking for res_init... yes
> checking for killpg in -lucb... no
> checking size of int... 4
> checking size of long... 4
> checking size of char *... 4
> checking for dlopen in -ldl... (cached) no
> checking for shl_unload in -ldld... no
> checking for extra includes... no
> checking for extra libs... added
> checking for libz... -lz
> checking for X... libraries /usr/X11R6/lib, headers /usr/X11R6/include
> checking for IceConnectionNumber in -lICE... yes
> checking for libXext... yes
> checking for libpng... -lpng -lz -lm
> checking for libjpeg6b... no
> checking for libjpeg... -ljpeg
> checking for Qt... libraries /usr/X11R6/lib, headers /usr/X11R6/include/qt2
> checking for moc... /usr/X11R6/bin/moc2
> checking for uic... /usr/X11R6/bin/uic
> checking for rpath... yes
> checking for KDE... libraries /usr/local/lib, headers /usr/local/include
> checking for KDE paths... defaults
> checking for dcopidl... /usr/local/bin/dcopidl
> checking for dcopidl2cpp... /usr/local/bin/dcopidl2cpp
> checking for mcopidl... /usr/local/bin/mcopidl
> checking for kdb2html... /usr/local/bin/kdb2html
> checking for artsc-config... /usr/local/bin/artsc-config
> checking for kde-config... /usr/local/bin/kde-config
> checking if developer-doc should be compiled... yes
> checking if doc should be compiled... yes
> checking if kmymoney2 should be compiled... yes
> checking if po should be compiled... yes
> updating cache ./config.cache
> creating ./config.status
> creating ./Makefile
> creating developer-doc/Makefile
> creating doc/Makefile
> creating doc/en/Makefile
> creating doc/images/Makefile
> creating kmymoney2/Makefile
> creating kmymoney2/dialogs/Makefile
> creating kmymoney2/icons/Makefile
> creating kmymoney2/icons/hicolor/Makefile
> creating kmymoney2/icons/hicolor/16x16/Makefile
> creating kmymoney2/icons/hicolor/16x16/actions/Makefile
> creating kmymoney2/icons/hicolor/22x22/Makefile
> creating kmymoney2/icons/hicolor/22x22/actions/Makefile
> creating kmymoney2/mymoney/Makefile
> creating kmymoney2/pics/Makefile
> creating kmymoney2/pics/toolbar/Makefile
> creating kmymoney2/widgets/Makefile
> creating po/Makefile
> creating config.h
> ===> Building for kmymoney2-0.3.6
> cd . && gmake -f admin/Makefile.common configure.in ;
> gmake[1]: Entering directory
> `/scratch/ports/deskutils/kmymoney2/work/kmymoney2-0.3.6' gmake[1]: Leaving
> directory `/scratch/ports/deskutils/kmymoney2/work/kmymoney2-0.3.6' cd . &&
> aclocal
> cd . && automake --foreign --include-deps ./Makefile
> ./Makefile.am:5: EXTRA_DIST multiply defined in condition TRUE
>
> EXTRA_DIST (User, where = 5) =
> {
> TRUE => kmymoney2.kdevprj AUTHORS COPYING ChangeLog INSTALL README TODO
> kmymoney2.lsm kmymoney2.spec readme-overview.txt ChangeLog.original }
> gmake: *** [Makefile.in] Error 1
> *** Error code 2
>
> Stop in /scratch/ports/deskutils/kmymoney2.
> *** Error code 1
>
> Stop in /scratch/ports/deskutils/kmymoney2.
> *** Error code 1
>
> Stop in /scratch/ports/deskutils/kmymoney2.
> *** Error code 1
>
> Stop in /scratch/ports/deskutils/kmymoney2.
> # exit'
>
> > ^C
>
> # exit
>
> Script done on Thu Jan 24 12:51:05 2002
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020126122108.E777D1AB>