Date: Sun, 15 Sep 2002 17:39:15 -0700 (PDT) From: Doug White <dwhite@gumbysoft.com> To: Rasmus Skaarup <mfbsd@skaarup.org> Cc: freebsd-hardware@freebsd.org Subject: Re: Intels new motherboard: SHG2 Message-ID: <20020915173030.I4815-100000@carver.gumbysoft.com> In-Reply-To: <20020916021448.V26391-100000@alfred.skaarup.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 16 Sep 2002, Rasmus Skaarup wrote: > > Can you post a dmesg for your system? I'm thinking you have a differnet > > board than a Hodges. Those chips show up on the Westville (SE7500WV2), > > and the dmesg will show a different chipset. The HG2 is ServerWorks while > > the WV2 is Intel. > > No problem. There's quite a few <unknown card>'s but I don't think I'm > missing any functionality.. MYKERNEL is basically a GENERIC without all > the IPv6 stuff. You have a Westville (SWV2) board here, Rasums, not a SHG2, unless Intel already redesigned the Hodges with a new chipset :-) > Timecounter "TSC" frequency 2193538580 Hz > CPU: Pentium 4 (2193.54-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 > Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE, > MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC> 2.2GHz xeon...no smp? :) > pci0: <unknown card> (vendor=0x8086, dev=0x2541) at 0.1 > pcib1: <PCI to PCI bridge (vendor=8086 device=2545)> at device 3.0 on pci0 > pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0 > pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on These are all parts of the Intel E7500 chipset. The SHG2 is a ServerWorks GC-LE. > em0: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> port > 0x2040-0x207f mem 0xfe9a0000-0xfe9bffff irq 9 at device 7.0 on pci3 > em0: Speed:100 Mbps Duplex:Full > em1: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> port > 0x2000-0x203f mem 0xfe9c0000-0xfe9dffff irq 9 at device 7.1 on pci3 > em1: Speed:N/A Duplex:N/A There's the dual gig-e... > asr0: <Adaptec Caching SCSI RAID> mem 0xfa000000-0xfbffffff irq 9 at and an extra asr (2110S) as a separate card rather than the zero-channel raid card. > pass1: <ESG-SHV SCA HSBP M20 0.05> Fixed Processor SCSI-2 device that's the backplane board controller in a SR1300/SR2300 (and other intel-made chassis). -- Doug White | FreeBSD: The Power to Serve dwhite@gumbysoft.com | www.FreeBSD.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020915173030.I4815-100000>