Date: Wed, 10 Apr 2002 11:18:04 -0500 From: "mithril" <mithril@fastem.com> To: <freebsd-hackers@freebsd.org> Subject: ALi M5451 Sound card wont work. Please Help! Message-ID: <006301c1e0ab$898a5ba0$ab2aa8c0@mrktg.zixadmin.com>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
------=_NextPart_000_0056_01C1E081.62695DC0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hi Everyone,
I hope this is the right list to post to. I got no responses on =
freebsd-questions. I have a Soyo K7ADA motherboard with integrated ALi =
M5451 sound card. It was working fine under Linux using the trident =
driver, but I recently switched to using FreeBSD as my primary OS. I am =
running 4.5 and understand that the snd_t4dwave.ko is the correct module =
for my card. When I load that module however, I get errors :
(excerpt from dmesg)
----------
pcm0: <Acer Labs M5451> port 0xd000-0xd0ff mem 0xdd000000-0xdd000fff irq =
5 at device 3.0 on pci0
pcm0: ac97 codec invalid or not present (id =3D=3D 0)
device_probe_and_attach: pcm0 attach returned 6
----------
I have run pciconf and even inspected the code of t4dwave.c (I am no pro =
C programmer, though). I do not know where to go from here. Please =
help!
Thanks so much,
Mithril
su-2.05a# pciconf -lv
chip0@pci0:0:0: class=3D0x060000 card=3D0x00000000 chip=3D0x164710b9 =
rev=3D0x02 hdr=3D0x00
vendor =3D 'Acer Labs Incorporated (ALi)'
device =3D 'ALI M1647 ALiMAGiK 1 AGP System Controller'
class =3D bridge
subclass =3D HOST-PCI
pcib1@pci0:1:0: class=3D0x060400 card=3D0x00000000 chip=3D0x524710b9 =
rev=3D0x00 hdr=3D0x01
vendor =3D 'Acer Labs Incorporated (ALi)'
device =3D 'ALI M1621 PCI to AGP Bridge'
class =3D bridge
subclass =3D PCI-PCI
ohci0@pci0:2:0: class=3D0x0c0310 card=3D0x523710b9 chip=3D0x523710b9 =
rev=3D0x03 hdr=3D0x00
vendor =3D 'Acer Labs Incorporated (ALi)'
device =3D 'ALI M5237 USB Host Controller'
class =3D serial bus
subclass =3D USB
none0@pci0:3:0: class=3D0x040100 card=3D0x545110b9 chip=3D0x545110b9 =
rev=3D0x02 hdr=3D0x00
vendor =3D 'Acer Labs Incorporated (ALi)'
device =3D 'ALI M5451 PCI AC-Link Controller Audio Device'
class =3D multimedia
subclass =3D audio
atapci0@pci0:4:0: class=3D0x01018a card=3D0x522910b9 =
chip=3D0x522910b9 rev=3D0xc4 hdr=3D0x00
vendor =3D 'Acer Labs Incorporated (ALi)'
device =3D 'M1543 Southbridge EIDE Controller'
class =3D mass storage
subclass =3D ATA
ohci1@pci0:6:0: class=3D0x0c0310 card=3D0x523710b9 chip=3D0x523710b9 =
rev=3D0x03 hdr=3D0x00
vendor =3D 'Acer Labs Incorporated (ALi)'
device =3D 'ALI M5237 USB Host Controller'
class =3D serial bus
subclass =3D USB
isab0@pci0:7:0: class=3D0x060100 card=3D0x153310b9 chip=3D0x153310b9 =
rev=3D0x00 hdr=3D0x00
vendor =3D 'Acer Labs Incorporated (ALi)'
device =3D 'ALI M1533 Aladdin IV ISA Bridge'
class =3D bridge
subclass =3D PCI-ISA
dc0@pci0:12:0: class=3D0x020000 card=3D0xc00111ad chip=3D0xc11511ad =
rev=3D0x25 hdr=3D0x00
vendor =3D 'Lite-On Communications Inc'
device =3D 'LC82C115 PNIC II 10/100 PCI MAC/PHY'
class =3D network
subclass =3D ethernet
xl0@pci0:13:0: class=3D0x020000 card=3D0x905510b7 chip=3D0x905510b7 =
rev=3D0x30 hdr=3D0x00
vendor =3D '3COM Corp, Networking Division'
device =3D '3C905B-TX Fast Etherlink 10/100 PCI TX NIC'
class =3D network
subclass =3D ethernet
chip1@pci0:17:0: class=3D0x068000 card=3D0x710110b9 =
chip=3D0x710110b9 rev=3D0x00 hdr=3D0x00
vendor =3D 'Acer Labs Incorporated (ALi)'
device =3D 'ALI M7101 Power Management Controller'
class =3D bridge
subclass =3D PCI-unknown
none1@pci1:0:0: class=3D0x030000 card=3D0xff03102b chip=3D0x0521102b =
rev=3D0x03 hdr=3D0x00
vendor =3D 'Matrox Graphics Inc'
device =3D 'MGA-G200 Millennium/Mystique G200 AGP'
class =3D display
subclass =3D VGA
FULL DMESG:
su-2.05a# dmesg
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights =
reserved.
FreeBSD 4.5-RELEASE #6: Sun Apr 7 00:19:23 CST 2002
root@gandalf.lotr:/usr/src/sys/compile/GANDALF
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 659941113 Hz
CPU: AMD Duron(tm) processor (659.94-MHz 686-class CPU)
Origin =3D "AuthenticAMD" Id =3D 0x630 Stepping =3D 0
=
Features=3D0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=3D0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory =3D 268369920 (262080K bytes)
avail memory =3D 257056768 (251032K bytes)
Preloaded elf kernel "kernel" at 0xc0402000.
Preloaded elf module "splash_bmp.ko" at 0xc040209c.
Preloaded splash_image_data "/boot/freebsd256.bmp" at 0xc0402140.
VESA: v2.0, 8192k memory, flags:0x1, mode table:0xc02df882 (1000022)
VESA: Matrox Graphics Inc.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00fdef0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <AcerLabs M5247 PCI-PCI(AGP Supported) bridge> at device 1.0 on =
pci0
pci1: <PCI bus> on pcib1
pci1: <Matrox MGA G200 AGP graphics accelerator> at 0.0 irq 10
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem =
0xdd004000-0xdd004fff irq 11 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ums0: Microsoft Microsoft Wheel Mouse Optical\M-., rev 1.10/1.21, addr =
2, iclass 3/1
ums0: 3 buttons and Z dir.
pci0: <unknown card> (vendor=3D0x10b9, dev=3D0x5451) at 3.0 irq 5
atapci0: <AcerLabs Aladdin ATA100 controller> port 0xd400-0xd40f at =
device 4.0 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem =
0xdd001000-0xdd001fff irq 11 at device 6.0 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
dc0: <LC82C115 PNIC II 10/100BaseTX> port 0xdc00-0xdcff mem =
0xdd003000-0xdd0030ff
irq 10 at device 12.0 on pci0
dc0: Ethernet address: 00:a0:cc:e2:a7:73
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xe000-0xe07f mem =
0xdd005000-0xdd00507f irq 11 at device 13.0 on pci0
xl0: Ethernet address: 00:50:da:26:db:3b
miibus1: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus1
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
chip1: <AcerLabs M15x3 Power Management Unit> at device 17.0 on pci0
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on =
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 820C> SCP,VLINK
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IP packet filtering initialized, divert enabled, rule-based forwarding =
disabled, default to deny, logging limited to 10 packets/entry by =
default
ad0: 28629MB <WDC WD300BB-00CCB0> [58168/16/63] at ata0-master UDMA100
acd0: DVD-ROM <CREATIVE DVD-ROM DVD1610E> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s1a
pcm0: <Acer Labs M5451> port 0xd000-0xd0ff mem 0xdd000000-0xdd000fff irq =
5 at device 3.0 on pci0
pcm0: ac97 codec invalid or not present (id =3D=3D 0)
device_probe_and_attach: pcm0 attach returned 6
pcm0: <Acer Labs M5451> port 0xd000-0xd0ff mem 0xdd000000-0xdd000fff irq =
5 at device 3.0 on pci0
pcm0: ac97 codec invalid or not present (id =3D=3D 0)
device_probe_and_attach: pcm0 attach returned 6
pcm0: <Acer Labs M5451> port 0xd000-0xd0ff mem 0xdd000000-0xdd000fff irq =
5 at device 3.0 on pci0
pcm0: ac97 codec invalid or not present (id =3D=3D 0)
device_probe_and_attach: pcm0 attach returned 6
(Note: I have obviously tried a couple times since my last reboot to =
load the module ;-)
------=_NextPart_000_0056_01C1E081.62695DC0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2712.300" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV>Hi Everyone,<BR><BR>I hope this is the right list to post to. =
I got=20
no responses on freebsd-questions. I have a Soyo K7ADA motherboard =
with=20
integrated ALi M5451 sound card. It was working fine under Linux =
using the=20
trident driver, but I recently switched to using FreeBSD as my primary =
OS. =20
I am running 4.5 and understand that the snd_t4dwave.ko is the correct =
module=20
for my card. When I load that module however, I get errors=20
:<BR><BR>(excerpt from dmesg)<BR>----------<BR>pcm0: <Acer Labs =
M5451>=20
port 0xd000-0xd0ff mem 0xdd000000-0xdd000fff irq 5 at device 3.0 on=20
pci0<BR>pcm0: ac97 codec invalid or not present (id =3D=3D=20
0)<BR>device_probe_and_attach: pcm0 attach returned =
6<BR>----------<BR><BR>I=20
have run pciconf and even inspected the code of t4dwave.c (I am no pro C =
programmer, though). I do not know where to go from here. =
Please=20
help!<BR><BR>Thanks so much,<BR>Mithril<BR><BR>su-2.05a# pciconf =
-lv<BR><A=20
href=3D"mailto:chip0@pci0:0:0">chip0@pci0:0:0</A>: class=3D0x060000 =
card=3D0x00000000=20
chip=3D0x164710b9 rev=3D0x02 hdr=3D0x00<BR> =
vendor =3D=20
'Acer Labs Incorporated (ALi)'<BR> device =
=3D 'ALI=20
M1647 ALiMAGiK 1 AGP System Controller'<BR> =20
class =3D bridge<BR> subclass =3D =
HOST-PCI<BR><A=20
href=3D"mailto:pcib1@pci0:1:0">pcib1@pci0:1:0</A>: class=3D0x060400 =
card=3D0x00000000=20
chip=3D0x524710b9 rev=3D0x00 hdr=3D0x01<BR> =
vendor =3D=20
'Acer Labs Incorporated (ALi)'<BR> device =
=3D 'ALI=20
M1621 PCI to AGP Bridge'<BR> class =
=3D=20
bridge<BR> subclass =3D PCI-PCI<BR><A=20
href=3D"mailto:ohci0@pci0:2:0">ohci0@pci0:2:0</A>: class=3D0x0c0310 =
card=3D0x523710b9=20
chip=3D0x523710b9 rev=3D0x03 hdr=3D0x00<BR> =
vendor =3D=20
'Acer Labs Incorporated (ALi)'<BR> device =
=3D 'ALI=20
M5237 USB Host Controller'<BR> class =
=3D=20
serial bus<BR> subclass =3D USB<BR><A=20
href=3D"mailto:none0@pci0:3:0">none0@pci0:3:0</A>: class=3D0x040100 =
card=3D0x545110b9=20
chip=3D0x545110b9 rev=3D0x02 hdr=3D0x00<BR> =
vendor =3D=20
'Acer Labs Incorporated (ALi)'<BR> device =
=3D 'ALI=20
M5451 PCI AC-Link Controller Audio Device'<BR> =20
class =3D multimedia<BR> subclass =
=3D=20
audio<BR><A=20
href=3D"mailto:atapci0@pci0:4:0">atapci0@pci0:4:0</A>: &=
nbsp; =20
class=3D0x01018a card=3D0x522910b9 chip=3D0x522910b9 rev=3D0xc4=20
hdr=3D0x00<BR> vendor =3D 'Acer Labs =
Incorporated=20
(ALi)'<BR> device =3D 'M1543 Southbridge =
EIDE=20
Controller'<BR> class =3D mass=20
storage<BR> subclass =3D ATA<BR><A=20
href=3D"mailto:ohci1@pci0:6:0">ohci1@pci0:6:0</A>: class=3D0x0c0310 =
card=3D0x523710b9=20
chip=3D0x523710b9 rev=3D0x03 hdr=3D0x00<BR> =
vendor =3D=20
'Acer Labs Incorporated (ALi)'<BR> device =
=3D 'ALI=20
M5237 USB Host Controller'<BR> class =
=3D=20
serial bus<BR> subclass =3D USB<BR><A=20
href=3D"mailto:isab0@pci0:7:0">isab0@pci0:7:0</A>: class=3D0x060100 =
card=3D0x153310b9=20
chip=3D0x153310b9 rev=3D0x00 hdr=3D0x00<BR> =
vendor =3D=20
'Acer Labs Incorporated (ALi)'<BR> device =
=3D 'ALI=20
M1533 Aladdin IV ISA Bridge'<BR> =
class =3D=20
bridge<BR> subclass =3D PCI-ISA<BR><A=20
href=3D"mailto:dc0@pci0:12:0">dc0@pci0:12:0</A>: class=3D0x020000=20
card=3D0xc00111ad chip=3D0xc11511ad rev=3D0x25 =
hdr=3D0x00<BR> =20
vendor =3D 'Lite-On Communications =
Inc'<BR> =20
device =3D 'LC82C115 PNIC II 10/100 PCI =
MAC/PHY'<BR> =20
class =3D network<BR> subclass =3D=20
ethernet<BR><A href=3D"mailto:xl0@pci0:13:0">xl0@pci0:13:0</A>: =20
class=3D0x020000 card=3D0x905510b7 chip=3D0x905510b7 rev=3D0x30=20
hdr=3D0x00<BR> vendor =3D '3COM Corp, =
Networking=20
Division'<BR> device =3D '3C905B-TX Fast =
Etherlink=20
10/100 PCI TX NIC'<BR> class =3D=20
network<BR> subclass =3D ethernet<BR><A=20
href=3D"mailto:chip1@pci0:17:0">chip1@pci0:17:0</A>: &nb=
sp; =20
class=3D0x068000 card=3D0x710110b9 chip=3D0x710110b9 rev=3D0x00=20
hdr=3D0x00<BR> vendor =3D 'Acer Labs =
Incorporated=20
(ALi)'<BR> device =3D 'ALI M7101 Power =
Management=20
Controller'<BR> class =3D=20
bridge<BR> subclass =3D PCI-unknown<BR><A=20
href=3D"mailto:none1@pci1:0:0">none1@pci1:0:0</A>: class=3D0x030000 =
card=3D0xff03102b=20
chip=3D0x0521102b rev=3D0x03 hdr=3D0x00<BR> =
vendor =3D=20
'Matrox Graphics Inc'<BR> device =3D =
'MGA-G200=20
Millennium/Mystique G200 AGP'<BR> =
class =3D=20
display<BR> subclass =3D VGA<BR><BR><BR>FULL =
DMESG:<BR>su-2.05a#=20
dmesg<BR>Copyright (c) 1992-2002 The FreeBSD Project.<BR>Copyright (c) =
1979,=20
1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,=20
1994<BR> The Regents of the =
University=20
of California. All rights reserved.<BR>FreeBSD 4.5-RELEASE #6: Sun =
Apr 7=20
00:19:23 CST 2002<BR> <A=20
href=3D"mailto:root@gandalf.lotr:/usr/src/sys/compile/GANDALF">root@ganda=
lf.lotr:/usr/src/sys/compile/GANDALF</A><BR>Timecounter=20
"i8254" frequency 1193182 Hz<BR>Timecounter "TSC" frequency=20
659941113 Hz<BR>CPU: AMD Duron(tm) processor (659.94-MHz 686-class=20
CPU)<BR> Origin =3D "AuthenticAMD" Id =3D 0x630 =
Stepping =3D=20
0<BR> =20
Features=3D0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,M=
CA,CMOV,PAT,PSE36,MMX,FXSR><BR> =20
AMD Features=3D0xc0440000<<b18>,AMIE,DSP,3DNow!><BR>real =
memory =20
=3D 268369920 (262080K bytes)<BR>avail memory =3D 257056768 (251032K=20
bytes)<BR>Preloaded elf kernel "kernel" at 0xc0402000.<BR>Preloaded elf =
module=20
"splash_bmp.ko" at 0xc040209c.<BR>Preloaded splash_image_data=20
"/boot/freebsd256.bmp" at 0xc0402140.<BR>VESA: v2.0, 8192k memory, =
flags:0x1,=20
mode table:0xc02df882 (1000022)<BR>VESA: Matrox Graphics Inc.<BR>Pentium =
Pro=20
MTRR support enabled<BR>md0: Malloc disk<BR>Using $PIR table, 8 entries =
at=20
0xc00fdef0<BR>npx0: <math processor> on motherboard<BR>npx0: INT =
16=20
interface<BR>pcib0: <Host to PCI bridge> on motherboard<BR>pci0: =
<PCI=20
bus> on pcib0<BR>pcib1: <AcerLabs M5247 PCI-PCI(AGP Supported) =
bridge>=20
at device 1.0 on pci0<BR>pci1: <PCI bus> on pcib1<BR>pci1: =
<Matrox MGA=20
G200 AGP graphics accelerator> at 0.0 irq 10<BR>ohci0: <AcerLabs =
M5237=20
(Aladdin-V) USB controller> mem 0xdd004000-0xdd004fff irq 11 at =
device 2.0 on=20
pci0<BR>usb0: OHCI version 1.0, legacy support<BR>usb0: <AcerLabs =
M5237=20
(Aladdin-V) USB controller> on ohci0<BR>usb0: USB revision =
1.0<BR>uhub0:=20
AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1<BR>uhub0: 4 =
ports with=20
4 removable, self powered<BR>ums0: Microsoft Microsoft Wheel Mouse =
Optical\M-.,=20
rev 1.10/1.21, addr 2, iclass 3/1<BR>ums0: 3 buttons and Z dir.<BR>pci0: =
<unknown card> (vendor=3D0x10b9, dev=3D0x5451) at 3.0 irq =
5<BR>atapci0:=20
<AcerLabs Aladdin ATA100 controller> port 0xd400-0xd40f at device =
4.0=20
on<BR>pci0<BR>ata0: at 0x1f0 irq 14 on atapci0<BR>ata1: at 0x170 irq 15 =
on=20
atapci0<BR>ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem=20
0xdd001000-0xdd001fff irq 11 at device 6.0 on pci0<BR>usb1: OHCI version =
1.0,=20
legacy support<BR>usb1: <AcerLabs M5237 (Aladdin-V) USB =
controller> on=20
ohci1<BR>usb1: USB revision 1.0<BR>uhub1: AcerLabs OHCI root hub, class =
9/0, rev=20
1.00/1.00, addr 1<BR>uhub1: 4 ports with 4 removable, self =
powered<BR>isab0:=20
<AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on =
pci0<BR>isa0:=20
<ISA bus> on isab0<BR>dc0: <LC82C115 PNIC II 10/100BaseTX> =
port=20
0xdc00-0xdcff mem 0xdd003000-0xdd0030ff<BR>irq 10 at device 12.0 on =
pci0<BR>dc0:=20
Ethernet address: 00:a0:cc:e2:a7:73<BR>miibus0: <MII bus> on=20
dc0<BR>dcphy0: <Intel 21143 NWAY media interface> on=20
miibus0<BR>dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, =
auto<BR>xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xe000-0xe07f =
mem=20
0xdd005000-0xdd00507f irq 11 at device 13.0 on pci0<BR>xl0: Ethernet =
address:=20
00:50:da:26:db:3b<BR>miibus1: <MII bus> on xl0<BR>xlphy0: <3Com =
internal media interface> on miibus1<BR>xlphy0: 10baseT, =
10baseT-FDX,=20
100baseTX, 100baseTX-FDX, auto<BR>chip1: <AcerLabs M15x3 Power =
Management=20
Unit> at device 17.0 on pci0<BR>orm0: <Option ROM> at iomem=20
0xc0000-0xc7fff on isa0<BR>fdc0: <NEC 72065B or clone> at port=20
0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0<BR>fdc0: FIFO enabled, 8 bytes=20
threshold<BR>fd0: <1440-KB 3.5" drive> on fdc0 drive 0<BR>atkbdc0: =
<Keyboard controller (i8042)> at port 0x60,0x64 on isa0<BR>atkbd0: =
<AT=20
Keyboard> flags 0x1 irq 1 on atkbdc0<BR>kbd0 at atkbd0<BR>psm0: =
<PS/2=20
Mouse> irq 12 on atkbdc0<BR>psm0: model IntelliMouse, device ID =
3<BR>vga0:=20
<Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on=20
isa0<BR>sc0: <System console> at flags 0x100 on isa0<BR>sc0: VGA =
<16=20
virtual consoles, flags=3D0x300><BR>sio0 at port 0x3f8-0x3ff irq 4 =
flags 0x10=20
on isa0<BR>sio0: type 16550A<BR>sio1 at port 0x2f8-0x2ff irq 3 on =
isa0<BR>sio1:=20
type 16550A<BR>ppc0: <Parallel port> at port 0x378-0x37f irq 7 on=20
isa0<BR>ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode<BR>ppbus0: =
IEEE1284 device found /NIBBLE/ECP<BR>Probing for PnP devices on=20
ppbus0:<BR>ppbus0: <HEWLETT-PACKARD DESKJET 820C> =
SCP,VLINK<BR>lpt0:=20
<Printer> on ppbus0<BR>lpt0: Interrupt-driven port<BR>ppi0: =
<Parallel=20
I/O> on ppbus0<BR>IP packet filtering initialized, divert enabled, =
rule-based=20
forwarding disabled, default to deny, logging limited to 10 =
packets/entry by=20
default<BR>ad0: 28629MB <WDC WD300BB-00CCB0> [58168/16/63] at =
ata0-master=20
UDMA100<BR>acd0: DVD-ROM <CREATIVE DVD-ROM DVD1610E> at =
ata1-master using=20
PIO4<BR>Mounting root from ufs:/dev/ad0s1a<BR>pcm0: <Acer Labs =
M5451> port=20
0xd000-0xd0ff mem 0xdd000000-0xdd000fff irq 5 at device 3.0 on =
pci0<BR>pcm0:=20
ac97 codec invalid or not present (id =3D=3D =
0)<BR>device_probe_and_attach: pcm0=20
attach returned 6<BR>pcm0: <Acer Labs M5451> port 0xd000-0xd0ff =
mem=20
0xdd000000-0xdd000fff irq 5 at device 3.0 on pci0<BR>pcm0: ac97 codec =
invalid or=20
not present (id =3D=3D 0)<BR>device_probe_and_attach: pcm0 attach =
returned=20
6<BR>pcm0: <Acer Labs M5451> port 0xd000-0xd0ff mem =
0xdd000000-0xdd000fff=20
irq 5 at device 3.0 on pci0<BR>pcm0: ac97 codec invalid or not present =
(id =3D=3D=20
0)<BR>device_probe_and_attach: pcm0 attach returned 6<BR><BR>(Note: I =
have=20
obviously tried a couple times since my last reboot to load the module=20
;-)</DIV></BODY></HTML>
------=_NextPart_000_0056_01C1E081.62695DC0--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?006301c1e0ab$898a5ba0$ab2aa8c0>