Date: Mon, 14 May 2007 00:16:08 +0200 From: Momchil Ivanov <idiotbg@gmail.com> To: Luigi Rizzo <rizzo@icir.org> Cc: freebsd-multimedia@freebsd.org Subject: Re: freebsd & webcam Message-ID: <200705140016.11713.idiotbg@gmail.com> In-Reply-To: <20070513130741.A20943@xorpc.icir.org> References: <200705132112.46658.idiotbg@gmail.com> <20070513130741.A20943@xorpc.icir.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--nextPart5434815.HGUNmr26eR Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline On Sunday 13 May 2007 22:07:41 Luigi Rizzo wrote: > On Sun, May 13, 2007 at 09:12:41PM +0200, Momchil Ivanov wrote: > > Hi guys, > > > > I`ve recently received Logitec QuickCam Express Plus and was wondering > > whether I can use it with freebsd. When I plug it in I see the following > > in messages ugen0: vendor 0x046d Camera, rev 1.10/0.00, addr 5 and the > > led on the camera is on. I`ve installed pwc (multimedia/pwcbsd from > > ports) but when I load the module nothing happens: I don`t see anything > > in messages and no /dev/video0 is created. My system is FreeBSD > > 6.2-STABLE #4: Sat Apr 21 23:27:13 CEST 2007 if that would be of any > > help. > > So my question is: can I use my webcam. If yes how :) ? and if no, is > > there some way to change the answer to yes? > > there are other drivers that you chan check namely > multimedia/linux-gspca-kmod and multimedia/linux-ov511-kmod > > cheers > luigi I`ve tried with the first one (though in my ports it`s not fetchable, since= =20 it`s moved in another directory on the server), I have /dev/video0 created= =20 but when I try mplayer tv://dev/video0 I get nothing and these errors ldev_attach: sc at 0xc4491700, l_u_d at 0xc4491764 =2D-- allocate 453 bytes gives 0xc3cf3a00 interface 0 has 14 altsettings (cur 0) gspca_attach_bridge: USB SPCA5XX camera found.(SPCA561A) spca5xx_probe: [spca5xx_probe:3979] Camera type S561=20 spca5xx_getcapability: [spca5xx_getcapability:1182] maxw 352 maxh 288 minw = 160=20 minh 120 998752 [1113] video_register_device: to be fixed but ok for now ldev0: vendor 0x046d Camera, rev 1.10/0.00, addr 5 1043444 [1077] video_devdata: not complete but ok for now spca561_init: [spca561_init:497] Find spca561 USB Product ID 92f spca5xx_set_light_freq: [spca5xx_set_light_freq:1851] Sensor currently not= =20 support light frequency banding filters. gspca_set_isoc_ep: [gspca_set_isoc_ep:874] ISO EndPoint found 0x81=20 AlternateSet 12 usb3: *** WARNING: opening low/full speed device, this does not work yet. 1043485 [ 872] usb_submit_urb: openpipe error 4 init isoc: usb_submit_urb(0) ret -41043486 [ 955] usb_kill_urb: not complet= e=20 but try something 1043486 [ 955] usb_kill_urb: not complete but try something 1043486 [ 955] usb_kill_urb: not complete but try something 1043486 [ 955] usb_kill_urb: not complete but try something spca5xx_open: [spca5xx_open:1919] DEALLOC error on init_Isoc 1046554 [1077] video_devdata: not complete but ok for now spca561_init: [spca561_init:497] Find spca561 USB Product ID 92f spca5xx_set_light_freq: [spca5xx_set_light_freq:1851] Sensor currently not= =20 support light frequency banding filters. gspca_set_isoc_ep: [gspca_set_isoc_ep:874] ISO EndPoint found 0x81=20 AlternateSet 12 usb3: *** WARNING: opening low/full speed device, this does not work yet. 1046594 [ 872] usb_submit_urb: openpipe error 4 init isoc: usb_submit_urb(0) ret -41046594 [ 955] usb_kill_urb: not complet= e=20 but try something 1046594 [ 955] usb_kill_urb: not complete but try something 1046594 [ 955] usb_kill_urb: not complete but try something 1046594 [ 955] usb_kill_urb: not complete but try something spca5xx_open: [spca5xx_open:1919] DEALLOC error on init_Isoc 1050631 [1077] video_devdata: not complete but ok for now spca561_init: [spca561_init:497] Find spca561 USB Product ID 92f spca5xx_set_light_freq: [spca5xx_set_light_freq:1851] Sensor currently not= =20 support light frequency banding filters. gspca_set_isoc_ep: [gspca_set_isoc_ep:874] ISO EndPoint found 0x81=20 AlternateSet 12 usb3: *** WARNING: opening low/full speed device, this does not work yet. 1050671 [ 872] usb_submit_urb: openpipe error 4 init isoc: usb_submit_urb(0) ret -41050671 [ 955] usb_kill_urb: not complet= e=20 but try something 1050671 [ 955] usb_kill_urb: not complete but try something 1050671 [ 955] usb_kill_urb: not complete but try something 1050671 [ 955] usb_kill_urb: not complete but try something spca5xx_open: [spca5xx_open:1919] DEALLOC error on init_Isoc The second one from ports that you recommend does nothing, it shows nothing= in=20 messages and doesn`t create /dev/video0. I`m interested in getting this to= =20 work under my freebsd since it`s my birthday present. So if there is=20 something I can help with (testing mostly) just say. =2D-=20 PGP KeyID: 0x3118168B Keyserver: pgp.mit.edu Key fingerprint BB50 2983 0714 36DC D02E =A0158A E03D 56DA 3118 168B =20 --nextPart5434815.HGUNmr26eR Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.3 (FreeBSD) iD8DBQBGR44r4D1W2jEYFosRAhqmAJ9qI4fUIKCq1SHQbv39Clr7r+zQuACdGvbW jCjfKff+UqvLMOx4bUjAWLA= =qzyx -----END PGP SIGNATURE----- --nextPart5434815.HGUNmr26eR--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200705140016.11713.idiotbg>