Date: Fri, 31 Oct 2008 10:29:55 +0100 From: Milan Obuch <freebsd-net@dino.sk> To: freebsd-net@freebsd.org, pyunyh@gmail.com Subject: Re: re weird bug Message-ID: <200810311029.56471.freebsd-net@dino.sk> In-Reply-To: <20081031011125.GC82781@cdnetworks.co.kr> References: <200810300829.35980.freebsd-net@dino.sk> <200810302241.01863.freebsd-net@dino.sk> <20081031011125.GC82781@cdnetworks.co.kr>
next in thread | previous in thread | raw e-mail | index | archive | help
On Friday 31 October 2008 02:11:25 Pyun YongHyeon wrote: > On Thu, Oct 30, 2008 at 10:41:01PM +0100, Milan Obuch wrote: > > On Thursday 30 October 2008 11:26:56 Pyun YongHyeon wrote: > > > On Thu, Oct 30, 2008 at 08:29:35AM +0100, Milan Obuch wrote: > > > > Hi, > > > > yesterday I csup'ped my 8-current sources on my MSI Wind netbook > > > > (again) and tried to build new kernel. There is again a problem > > > > with re interface. It just does not work, with following > > > > > > > > re0: <RealTek 8101E/8102E/8102EL PCIe 10/100baseTX> port > > > > 0xc000-0xc0ff mem 0xffd10000-0xffd10fff,0xffd00000-0xffd0ffff irq > > > > 16 at device 0.0 on pci1 re0: Chip rev. 0x34800000 > > > > re0: MAC rev. 0x00200000 > > > > re0: PHY write failed > > > > re0: PHY write failed > > > > re0: MII without any phy! > > > > device_attach: re0 attach returned 6 > > > > [ snip ] > > > > > > That's known issue for newer RealTek PCIe controllers. Would you > > > please try the patch at the following URL? > > > http://people.freebsd.org/~yongari/re/re.ephy.patch.20081021 > > > > > > Since it's not easy to reproduce this issue please make sure to > > > (cold and warm) reboot several times until you can put confidence > > > in the patch. > > > > I tried, but no change - with patch applied re still does not work > > unless I boot with verbose logging, no matter whether I boot cold or > > warm. > > Thanks for testing. If you look into patched if_re.c you can see a > "#if 1" in function re_ephy_config(). How about changing it to > "#if 0" to enable more aggresive reprogramming for EPHY register? I tried. Again, no change - rlphy not working normally, but everything works when booting with verbose logging. If there is anything else I could test, let me know. Booting with verbose logging is acceptable for me for now, so do not feel any pressure from my side. I just like to test when something will be available for test. Regards, Milan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200810311029.56471.freebsd-net>