Date: Sun, 30 Mar 2003 11:30:13 -0800 (PST) From: Deutscher Stefan <Deutscher.Stefan@bcg.com> To: freebsd-bugs@FreeBSD.org Subject: Re: misc/50053: FreeBSD 4.7/5.0 machine dies on scanpci Message-ID: <200303301930.h2UJUD9W080837@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR misc/50053; it has been noted by GNATS. From: Deutscher Stefan <Deutscher.Stefan@bcg.com> To: "'freebsd-gnats-submit@FreeBSD.org'" <freebsd-gnats-submit@FreeBSD.org>, "'sad@mailaps.org'" <sad@mailaps.org> Cc: Subject: Re: misc/50053: FreeBSD 4.7/5.0 machine dies on scanpci Date: Sun, 30 Mar 2003 21:28:19 +0200 Hi all, my machine still keeps crashing upon invoking scanpci or XFree 4.2.1. I have meanwhile done three more things on a spare disk: 1) Tried to install Redhat Linux 8.0: died with kernel panic in the install and I didn't have the patience to fiddle with it 2) Installed Redhat Linux 3.0.3: Worked just fine; X 3.1.2 came up after autoprobe and scanpci completed without killing the box 3) Installed FreeBSD 4.3: scanpci completes fine, X 3.6.x hangs the machine hard Detailed log files for the last two attempts follow below. I am wondering now: Is this - a FreeBSD problem: after all, I don't think it should allow X to kill it, - or an X problem: after all, older versions work, and scanpci shouldn't do what it is doing to my box Maybe I have to file a bug report with the XFree86 folks, too? Any pointers are most appreciated, I am really getting desperate to get X up on this box. Thanks in advance, and below the gory details. Stefan Details: 1) Tried to install Redhat Linux 8.0: nothing to write home about ================================================================== 2) Installed Redhat Linux 3.0.3: ================================== a) Output of dmesg -------------------- Console: colour EGA+ 80x25, 1 virtual console (max 63) bios32_init : BIOS32 Service Directory structure at 0x000f6e10 bios32_init : BIOS32 Service Directory entry at 0xf6e20 pcibios_init : PCI BIOS revision 2.00 entry at 0xf6e41 Probing PCI hardware. Calibrating delay loop.. ok - 39.94 BogoMips Serial driver version 4.11 with no serial options enabled tty00 at 0x03f8 (irq = 4) is a 16550A tty01 at 0x02f8 (irq = 3) is a 16550A lp1 at 0x0378, using polling driver PS/2 auxiliary pointing device detected -- driver installed. tpqic02: Runtime config, $Revision: 0.4.1.5 $, $Date: 1994/10/29 02:46:13 $ tpqic02: DMA buffers: 20 blocks, at address 0x1ff400 (0x1ff3f4) ftape: allocated 3 buffers aligned at: 00248000 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 scsi-ncr53c7,8xx : at PCI bus 0, device 7, function 0 scsi-ncr53c7,8xx : NCR53c810 at memory 0xffbdff00, io 0xfc00, irq 10 scsi0 : using io mapped access scsi0 : using initiator ID 7 scsi0 : using edge triggered interrupts scsi0 : burst length 8 scsi0 : using 40MHz SCSI clock scsi0 : NCR code relocated to 0x3c82f0 scsi0 : test 1 started scsi0 : NCR53c{7,8}xx (rel 4) scsi : 1 host. Vendor: IBM Model: DPES-31080 Rev: S31Q Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, id 0, lun 0 Vendor: SEAGATE Model: ST39140N Rev: 1498 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdb at scsi0, id 1, lun 0 Vendor: TOSHIBA Model: CD-ROM XM-4101TA Rev: 1084 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi0, id 2, lun 0 scsi : detected 1 SCSI cdrom 2 SCSI disks total. SCSI Hardware sector size is 512 bytes on device sda SCSI Hardware sector size is 512 bytes on device sdb Memory: 63256k/66556k available (800k kernel code, 384k reserved, 2116k data) This processor honours the WP bit even when in supervisor mode. Good. Swansea University Computer Society NET3.019 Swansea University Computer Society TCP/IP for NET3.019 IP Protocols: ICMP, UDP, TCP Swansea University Computer Society IPX 0.29 BETA for NET3.019 IPX Portions Copyright (c) 1995 Caldera, Inc. PPP: version 0.2.7 (4 channels) NEW_TTY_DRIVERS OPTIMIZE_FLAGS TCP compression code copyright 1989 Regents of the University of California PPP line discipline registered. SLIP: version 0.8.3-NET3.019-NEWTTY (4 channels) (6 bit encapsulation enabled) CSLIP: code copyright 1989 Regents of the University of California Checking 386/387 coupling... Ok, fpu using exception 16 error reporting. Checking 'hlt' instruction... Ok. Linux version 1.2.13 (root@daffy.redhat.com) (gcc version 2.7.0) #1 Sun Feb 11 08:28:08 EST 1996 Partition check: sda: sda1 sda2 sdb: sdb1 RAMDISK: 1474560 bytes, starting at 0x00260000 VFS: Insert ramdisk floppy and press ENTER VFS: Disk change detected on device 2/0 RAMDISK: Ext2 filesystem found at block 0 RAMDISK: Loading 1440 blocks into RAM disk........................................................................ .................. done VFS: Mounted root (ext2 filesystem). Max size:292111 Log zone size:2048 First datazone:52 Root inode number 106496 ISO9660 Extensions: RRIP_1991A VFS: Disk change detected on device 2/0 VFS: Can't find an ext2 filesystem on dev 2/0. iBCS: socksys registered on character major 30 b) Output of scanpci --------------------- PCI says configuration type 2 PCI probing configuration type 1 pci bus 0x0 cardnum 0x01, vendor 0xfefe device 0xfefe Device unknown STATUS 0xfeff COMMAND 0xfffe CLASS 0xfe 0xfe 0xfe REVISION 0xfe BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe BASE0 0xfefefefe addr 0xfefefef0 MEM BASE1 0xfefefefe addr 0xfefefef0 MEM BASE2 0xfefefefe addr 0xfefefef0 MEM BASE3 0xfefefefe addr 0xfefefef0 MEM BASE4 0xfefefefe addr 0xfefefef0 MEM BASE5 0xfefefefe addr 0xfefefef0 MEM BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe pci bus 0x0 cardnum 0x02, vendor 0xfefe device 0xfefe Device unknown STATUS 0xfefe COMMAND 0xfefe CLASS 0xfe 0xfe 0xfe REVISION 0xfe BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe BASE0 0xfefefefe addr 0xfefefef0 MEM BASE1 0xfefefefe addr 0xfefefef0 MEM BASE2 0xfefefefe addr 0xfefefef0 MEM BASE3 0xfefefefe addr 0xfefefef0 MEM BASE4 0xfefefefe addr 0xfefefef0 MEM BASE5 0xfefefefe addr 0xfefefef0 MEM BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe pci bus 0x0 cardnum 0x03, vendor 0xfefe device 0xfefe Device unknown STATUS 0xfefe COMMAND 0xfefe CLASS 0xfe 0xfe 0xfe REVISION 0xfe BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe BASE0 0xfefefefe addr 0xfefefef0 MEM BASE1 0xfefefefe addr 0xfefefef0 MEM BASE2 0xfefefefe addr 0xfefefef0 MEM BASE3 0xfefefefe addr 0xfefefef0 MEM BASE4 0xfefefefe addr 0xfefefef0 MEM BASE5 0xfefefefe addr 0xfefefef0 MEM BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe pci bus 0x0 cardnum 0x04, vendor 0xfefe device 0xfefe Device unknown STATUS 0xfefe COMMAND 0xfefe CLASS 0xfe 0xfe 0xfe REVISION 0xfe BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe BASE0 0xfefefefe addr 0xfefefef0 MEM BASE1 0xfefefefe addr 0xfefefef0 MEM BASE2 0xfefefefe addr 0xfefefef0 MEM BASE3 0xfefefefe addr 0xfefefef0 MEM BASE4 0xfefefefe addr 0xfefefef0 MEM BASE5 0xfefefefe addr 0xfefefef0 MEM BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe pci bus 0x0 cardnum 0x05, vendor 0xfefe device 0xfefe Device unknown STATUS 0xfefe COMMAND 0xfefe CLASS 0xfe 0xfe 0xfe REVISION 0xfe BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe BASE0 0xfefefefe addr 0xfefefef0 MEM BASE1 0xfefefefe addr 0xfefefef0 MEM BASE2 0xfefefefe addr 0xfefefef0 MEM BASE3 0xfefefefe addr 0xfefefef0 MEM BASE4 0xfefefefe addr 0xfefefef0 MEM BASE5 0xfefefefe addr 0xfefefef0 MEM BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe pci bus 0x0 cardnum 0x06, vendor 0xfefe device 0xfeff Device unknown STATUS 0xfeff COMMAND 0xfefe CLASS 0xfe 0xfe 0xfe REVISION 0xfe BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe BASE0 0xfefefefe addr 0xfefefef0 MEM BASE1 0xfefefefe addr 0xfefefef0 MEM BASE2 0xfefefefe addr 0xfefefef0 MEM BASE3 0xfefefefe addr 0xfefefef0 MEM BASE4 0xfefefefe addr 0xfefefef0 MEM BASE5 0xfefefefe addr 0xfefefef0 MEM BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe pci bus 0x0 cardnum 0x07, vendor 0xfefe device 0xfefe Device unknown STATUS 0xfefe COMMAND 0xfefe CLASS 0xfe 0xfe 0xfe REVISION 0xfe BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe BASE0 0xfefefefe addr 0xfefefef0 MEM BASE1 0xfefefefe addr 0xfefefef0 MEM BASE2 0xfefefefe addr 0xfefefef0 MEM BASE3 0xfefefefe addr 0xfefefef0 MEM BASE4 0xfefefefe addr 0xfefefef0 MEM BASE5 0xfefefefe addr 0xfefefef0 MEM BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe pci bus 0x0 cardnum 0x08, vendor 0xfefe device 0xfefe Device unknown STATUS 0xfefe COMMAND 0xfefe CLASS 0xfe 0xfe 0xfe REVISION 0xfe BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe BASE0 0xfefefefe addr 0xfefefef0 MEM BASE1 0xfefefefe addr 0xfefefef0 MEM BASE2 0xfefefefe addr 0xfefefef0 MEM BASE3 0xfefefefe addr 0xfefefef0 MEM BASE4 0xfefefefe addr 0xfefefef0 MEM BASE5 0xfefefefe addr 0xfefefef0 MEM BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe pci bus 0x0 cardnum 0x09, vendor 0xfefe device 0xfeff Device unknown STATUS 0xfefe COMMAND 0xfefe CLASS 0xfe 0xfe 0xfe REVISION 0xfe BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe BASE0 0xfefefefe addr 0xfefefef0 MEM BASE1 0xfefefefe addr 0xfefefef0 MEM BASE2 0xfefefefe addr 0xfefefef0 MEM BASE3 0xfefefefe addr 0xfefefef0 MEM BASE4 0xfefefefe addr 0xfefefef0 MEM BASE5 0xfefefefe addr 0xfefefef0 MEM BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe pci bus 0x0 cardnum 0x0a, vendor 0xfefe device 0xfefe Device unknown STATUS 0xfefe COMMAND 0xfefe CLASS 0xfe 0xfe 0xfe REVISION 0xfe BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe BASE0 0xfefefefe addr 0xfefefef0 MEM BASE1 0xfefefefe addr 0xfefefef0 MEM BASE2 0xfefefefe addr 0xfefefef0 MEM BASE3 0xfefefefe addr 0xfefefef0 MEM BASE4 0xfefefefe addr 0xfefefef0 MEM BASE5 0xfefefefe addr 0xfefefef0 MEM BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe pci bus 0x0 cardnum 0x0b, vendor 0xfefe device 0xfeff Device unknown STATUS 0xfefe COMMAND 0xfefe CLASS 0xfe 0xfe 0xfe REVISION 0xfe BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe BASE0 0xfefefefe addr 0xfefefef0 MEM BASE1 0xfefefefe addr 0xfefefef0 MEM BASE2 0xfefefefe addr 0xfefefef0 MEM BASE3 0xfefefefe addr 0xfefefef0 MEM BASE4 0xfefefefe addr 0xfefefef0 MEM BASE5 0xfefefefe addr 0xfefefef0 MEM BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe pci bus 0x0 cardnum 0x0c, vendor 0xfefe device 0xfefe Device unknown STATUS 0xfefe COMMAND 0xfefe CLASS 0xfe 0xfe 0xfe REVISION 0xfe BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe BASE0 0xfefefefe addr 0xfefefef0 MEM BASE1 0xfefefefe addr 0xfefefef0 MEM BASE2 0xfefefefe addr 0xfefefef0 MEM BASE3 0xfefefefe addr 0xfefefef0 MEM BASE4 0xfefefefe addr 0xfefefef0 MEM BASE5 0xfefefefe addr 0xfefefef0 MEM BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe pci bus 0x0 cardnum 0x0e, vendor 0xfefe device 0xfefe Device unknown STATUS 0xfefe COMMAND 0xfefe CLASS 0xfe 0xfe 0xfe REVISION 0xfe BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe BASE0 0xfefefefe addr 0xfefefef0 MEM BASE1 0xfefefefe addr 0xfefefef0 MEM BASE2 0xfefefefe addr 0xfefefef0 MEM BASE3 0xfefefefe addr 0xfefefef0 MEM BASE4 0xfefefefe addr 0xfefefef0 MEM BASE5 0xfefefefe addr 0xfefefef0 MEM BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe pci bus 0x0 cardnum 0x0f, vendor 0xfefe device 0xfeff Device unknown STATUS 0xfefe COMMAND 0xfefe CLASS 0xfe 0xfe 0xfe REVISION 0xfe BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe BASE0 0xfefefefe addr 0xfefefef0 MEM BASE1 0xfefefefe addr 0xfefefef0 MEM BASE2 0xfefefefe addr 0xfefefef0 MEM BASE3 0xfefefefe addr 0xfefefef0 MEM BASE4 0xfefefefe addr 0xfefefef0 MEM BASE5 0xfefefefe addr 0xfefefef0 MEM BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe pci bus 0x0 cardnum 0x10, vendor 0xfefe device 0xfefe Device unknown STATUS 0xfefe COMMAND 0xfefe CLASS 0xfe 0xfe 0xfe REVISION 0xfe BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe BASE0 0xfefefefe addr 0xfefefef0 MEM BASE1 0xfefefefe addr 0xfefefef0 MEM BASE2 0xfefefefe addr 0xfefefef0 MEM BASE3 0xfefefefe addr 0xfefefef0 MEM BASE4 0xfefefefe addr 0xfefefef0 MEM BASE5 0xfefefefe addr 0xfefefef0 MEM BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe pci bus 0x0 cardnum 0x11, vendor 0xfefe device 0xfeff Device unknown STATUS 0xfefe COMMAND 0xfefe CLASS 0xfe 0xfe 0xfe REVISION 0xfe BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe BASE0 0xfefefefe addr 0xfefefef0 MEM BASE1 0xfefefefe addr 0xfefefef0 MEM BASE2 0xfefefefe addr 0xfefefef0 MEM BASE3 0xfefefefe addr 0xfefefef0 MEM BASE4 0xfefefefe addr 0xfefefef0 MEM BASE5 0xfefefefe addr 0xfefefef0 MEM BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe pci bus 0x0 cardnum 0x12, vendor 0xfefe device 0xfefe Device unknown STATUS 0xfefe COMMAND 0xfefe CLASS 0xfe 0xfe 0xfe REVISION 0xfe BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe BASE0 0xfefefefe addr 0xfefefef0 MEM BASE1 0xfefefefe addr 0xfefefef0 MEM BASE2 0xfefefefe addr 0xfefefef0 MEM BASE3 0xfefefefe addr 0xfefefef0 MEM BASE4 0xfefefefe addr 0xfefefef0 MEM BASE5 0xfefefefe addr 0xfefefef0 MEM BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe pci bus 0x0 cardnum 0x13, vendor 0xfefe device 0xfefe Device unknown STATUS 0xfefe COMMAND 0xfefe CLASS 0xfe 0xfe 0xfe REVISION 0xfe BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe BASE0 0xfefefefe addr 0xfefefef0 MEM BASE1 0xfefefefe addr 0xfefefef0 MEM BASE2 0xfefefefe addr 0xfefefef0 MEM BASE3 0xfefefefe addr 0xfefefef0 MEM BASE4 0xfefefefe addr 0xfefefef0 MEM BASE5 0xfefefefe addr 0xfefefef0 MEM BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe pci bus 0x0 cardnum 0x14, vendor 0xfefe device 0xfefe Device unknown STATUS 0xfefe COMMAND 0xfefe CLASS 0xfe 0xfe 0xfe REVISION 0xfe BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe BASE0 0xfefefefe addr 0xfefefef0 MEM BASE1 0xfefefefe addr 0xfefefef0 MEM BASE2 0xfefefefe addr 0xfefefef0 MEM BASE3 0xfefefefe addr 0xfefefef0 MEM BASE4 0xfefefefe addr 0xfefefef0 MEM BASE5 0xfefefefe addr 0xfefefef0 MEM BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe pci bus 0x0 cardnum 0x15, vendor 0xfefe device 0xfefe Device unknown STATUS 0xfefe COMMAND 0xfefe CLASS 0xfe 0xfe 0xfe REVISION 0xfe BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe BASE0 0xfefefefe addr 0xfefefef0 MEM BASE1 0xfefefefe addr 0xfefefef0 MEM BASE2 0xfefefefe addr 0xfefefef0 MEM BASE3 0xfefefefe addr 0xfefefef0 MEM BASE4 0xfefefefe addr 0xfefefef0 MEM BASE5 0xfefefefe addr 0xfefefef0 MEM BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe pci bus 0x0 cardnum 0x16, vendor 0xfefe device 0xfeff Device unknown STATUS 0xfefe COMMAND 0xfefe CLASS 0xfe 0xfe 0xfe REVISION 0xfe BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe BASE0 0xfefefefe addr 0xfefefef0 MEM BASE1 0xfefefefe addr 0xfefefef0 MEM BASE2 0xfefefefe addr 0xfefefef0 MEM BASE3 0xfefefefe addr 0xfefefef0 MEM BASE4 0xfefefefe addr 0xfefefef0 MEM BASE5 0xfefefefe addr 0xfefefef0 MEM BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe pci bus 0x0 cardnum 0x17, vendor 0xfefe device 0xfefe Device unknown STATUS 0xfefe COMMAND 0xfefe CLASS 0xfe 0xfe 0xfe REVISION 0xfe BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe BASE0 0xfefefefe addr 0xfefefef0 MEM BASE1 0xfefefefe addr 0xfefefef0 MEM BASE2 0xfefefefe addr 0xfefefef0 MEM BASE3 0xfefefefe addr 0xfefefef0 MEM BASE4 0xfefefefe addr 0xfefefef0 MEM BASE5 0xfefefefe addr 0xfefefef0 MEM BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe pci bus 0x0 cardnum 0x18, vendor 0xfefe device 0xfeff Device unknown STATUS 0xfefe COMMAND 0xfefe CLASS 0xfe 0xfe 0xfe REVISION 0xfe BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe BASE0 0xfefefefe addr 0xfefefef0 MEM BASE1 0xfefefefe addr 0xfefefef0 MEM BASE2 0xfefefefe addr 0xfefefef0 MEM BASE3 0xfefefefe addr 0xfefefef0 MEM BASE4 0xfefefefe addr 0xfefefef0 MEM BASE5 0xfefefefe addr 0xfefefef0 MEM BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe pci bus 0x0 cardnum 0x19, vendor 0xfefe device 0xfefe Device unknown STATUS 0xfefe COMMAND 0xfefe CLASS 0xfe 0xfe 0xfe REVISION 0xfe BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe BASE0 0xfefefefe addr 0xfefefef0 MEM BASE1 0xfefefefe addr 0xfefefef0 MEM BASE2 0xfefefefe addr 0xfefefef0 MEM BASE3 0xfefefefe addr 0xfefefef0 MEM BASE4 0xfefefefe addr 0xfefefef0 MEM BASE5 0xfefefefe addr 0xfefefef0 MEM BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe pci bus 0x0 cardnum 0x1a, vendor 0xfefe device 0xfefe Device unknown STATUS 0xfeff COMMAND 0xfffe CLASS 0xfe 0xfe 0xfe REVISION 0xfe BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe BASE0 0xfefefefe addr 0xfefefef0 MEM BASE1 0xfefefefe addr 0xfefefef0 MEM BASE2 0xfefefefe addr 0xfefefef0 MEM BASE3 0xfefefefe addr 0xfefefef0 MEM BASE4 0xfefefefe addr 0xfefefef0 MEM BASE5 0xfefefefe addr 0xfefefef0 MEM BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe pci bus 0x0 cardnum 0x1c, vendor 0xfefe device 0xfefe Device unknown STATUS 0xfefe COMMAND 0xfefe CLASS 0xfe 0xfe 0xfe REVISION 0xfe BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe BASE0 0xfefefefe addr 0xfefefef0 MEM BASE1 0xfefefefe addr 0xfefefef0 MEM BASE2 0xfefefefe addr 0xfefefef0 MEM BASE3 0xfefefefe addr 0xfefefef0 MEM BASE4 0xfefefefe addr 0xfefefef0 MEM BASE5 0xfefefefe addr 0xfefefef0 MEM BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe pci bus 0x0 cardnum 0x1d, vendor 0xfefe device 0xfefe Device unknown STATUS 0xfefe COMMAND 0xfefe CLASS 0xfe 0xfe 0xfe REVISION 0xfe BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe BASE0 0xfefefefe addr 0xfefefef0 MEM BASE1 0xfefefefe addr 0xfefefef0 MEM BASE2 0xfefefefe addr 0xfefefef0 MEM BASE3 0xfefefefe addr 0xfefefef0 MEM BASE4 0xfefefefe addr 0xfefefef0 MEM BASE5 0xfefefefe addr 0xfefefef0 MEM BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe pci bus 0x0 cardnum 0x1e, vendor 0xfefe device 0xfeff Device unknown STATUS 0xfefe COMMAND 0xfefe CLASS 0xfe 0xfe 0xfe REVISION 0xfe BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe BASE0 0xfefefefe addr 0xfefefef0 MEM BASE1 0xfefefefe addr 0xfefefef0 MEM BASE2 0xfefefefe addr 0xfefefef0 MEM BASE3 0xfefefefe addr 0xfefefef0 MEM BASE4 0xfefefefe addr 0xfefefef0 MEM BASE5 0xfefefefe addr 0xfefefef0 MEM BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe pci bus 0x0 cardnum 0x1f, vendor 0xfefe device 0xfefe Device unknown STATUS 0xfefe COMMAND 0xfefe CLASS 0xfe 0xfe 0xfe REVISION 0xfe BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe BASE0 0xfefefefe addr 0xfefefef0 MEM BASE1 0xfefefefe addr 0xfefefef0 MEM BASE2 0xfefefefe addr 0xfefefef0 MEM BASE3 0xfefefefe addr 0xfefefef0 MEM BASE4 0xfefefefe addr 0xfefefef0 MEM BASE5 0xfefefefe addr 0xfefefef0 MEM BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe PCI probing configuration type 2 pci bus 0x0 slot at 0xc000, vendor 0x8086 device 0x04a3 Intel 82434LX pci cache mem controller STATUS 0xa400 COMMAND 0x0106 CLASS 0x06 0x00 0x00 REVISION 0x11 BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x00 pci bus 0x0 slot at 0xc200, vendor 0x8086 device 0x0482 Intel 82375EB pci-eisa bridge STATUS 0x0200 COMMAND 0x0007 CLASS 0x00 0x00 0x00 REVISION 0x04 BIST 0x00 HEADER 0x00 LATENCY 0xf8 CACHE 0x00 pci bus 0x0 slot at 0xc600, vendor 0x1022 device 0x2000 AMD 79C970 Lance STATUS 0x0200 COMMAND 0x0185 CLASS 0x02 0x00 0x00 REVISION 0x02 BASE0 0x0000ff81 addr 0x0000ff80 I/O MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x09 pci bus 0x0 slot at 0xc700, vendor 0x1000 device 0x0001 NCR 53C810 STATUS 0x0200 COMMAND 0x0007 CLASS 0x00 0x00 0x00 REVISION 0x01 BIST 0x00 HEADER 0x00 LATENCY 0xf8 CACHE 0x00 BASE0 0x0000fc01 addr 0x0000fc00 I/O BASE1 0xffbdff00 addr 0xffbdff00 MEM MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x0a pci bus 0x0 slot at 0xc800, vendor 0x5333 device 0x8811 S3 Trio64 STATUS 0x0200 COMMAND 0x0003 CLASS 0x03 0x00 0x00 REVISION 0x00 BASE0 0xf3000000 addr 0xf3000000 MEM BASEROM 0xffbe0000 addr 0xffbe0000 not-decode-enabled MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x0b c) XF86Config -------------- # This XF86Config file generated by the Xconfigurator # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" # # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # NoTrapSignals # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence # DontZap EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Keyboard section # ********************************************************************** Section "Keyboard" Protocol "Standard" # when using XQUEUE, comment out the above line, and uncomment the # following line # Protocol "Xqueue" AutoRepeat 500 5 ServerNumLock # Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)) # Xleds 1 2 3 # To set the LeftAlt to Meta, RightAlt key to ModeShift, # RightCtl key to Compose, and ScrollLock key to ModeLock: # LeftAlt Meta # RightAlt ModeShift # RightCtl Compose # ScrollLock ModeLock EndSection # ********************************************************************** # Pointer section # ********************************************************************** Section "Pointer" Protocol "PS/2" Device "/dev/mouse" # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Protocol "Xqueue" # Baudrate and SampleRate are only for some Logitech mice # BaudRate 9600 # SampleRate 150 # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Buttons # ChordMiddle is an option for some 3-button Logitech mice # ChordMiddle # Some dual-protocol mice require DTR to be cleared to operate in # MouseSystems mode. # ClearDTR # Some dual-protocol mice require RTS to be cleared to operate in # MouseSystems mode. # ClearRTS EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present Section "Device" Identifier "Generic Video Card" VendorName "Unknown" BoardName "Unknown" Chipset "mmio_928" Ramdac "s3_trio64" ClockChip "s3gendac" VideoRam 1024 EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "Generic Multisync" VendorName "Unknown" ModelName "Unknown" Bandwidth 50 HorizSync 30-64 VertRefresh 50-100 ModeLine "640x480_2" 25.175 640 664 760 800 480 491 493 525 ModeLine "800x600_4" 40.000 800 848 1000 1056 600 605 607 633 ModeLine "800x600_5" 50.000 800 856 976 1040 600 637 643 666 +hsync +vsync EndSection # ********************************************************************** # Screen sections # ********************************************************************** # The colour SVGA server Section "Screen" Driver "svga" Device "Generic Video Card" Monitor "Generic Multisync" Subsection "Display" Depth 8 Modes "640x480_2" "800x600_4" "800x600_5" ViewPort 0 0 Virtual 1024 768 EndSubsection EndSection # The 16-colour VGA server Section "Screen" Driver "vga16" Device "Generic Video Card" Monitor "Generic Multisync" Subsection "Display" Modes "640x480_2" "800x600_4" "800x600_5" ViewPort 0 0 Virtual 1024 768 EndSubsection EndSection # The Mono server Section "Screen" Driver "vga2" Device "Generic Video Card" Monitor "Generic Multisync" Subsection "Display" Modes "640x480_2" "800x600_4" "800x600_5" ViewPort 0 0 Virtual 1024 768 EndSubsection EndSection # The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32) Section "Screen" Driver "accel" Device "Generic Video Card" Monitor "Generic Multisync" Subsection "Display" Depth 8 Modes "640x480_2" "800x600_4" "800x600_5" ViewPort 0 0 Virtual 1024 768 EndSubsection EndSection d) Contents of /var/log/tmp/probe ---------------------------------- XFree86 Version 3.1.2 / X Window System (protocol Version 11, revision 0, vendor release 6000) Operating System: Linux Configured drivers: S3: accelerated server for S3 graphics adaptors (Patchlevel 0) mmio_928, s3_generic (using VT number 7) XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200 (**) S3: Graphics device ID: "Generic" (**) S3: Monitor ID: "Generic Monitor" (--) S3: Mode "640x480" needs hsync freq of 37.86 kHz. Deleted. (--) S3: Mode "640x480" needs hsync freq of 32.78 kHz. Deleted. Warning: No FontPath specified, using compiled-in default. (--) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/ lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/font s/100dpi/" (--) S3: card type: PCI (--) S3: chipset: Trio64 rev. 301 (--) S3: chipset driver: mmio_928 (--) S3: videoram: 1024k (--) S3: for Trio32/64 chips you shouldn't specify a Clockchip (--) S3: Ramdac type: s3_trio64 (--) S3: Ramdac speed: 135 (--) S3: Using Trio32/64 programmable clock (MCLK 57.273 MHz) (--) S3: Maximum allowed dot-clock: 135.000 MHz (**) S3: Mode "640x480": mode clock = 25.175 (--) S3: Using 6 bits per RGB value (--) S3: Virtual resolution set to 640x480 3) Installed FreeBSD 4.3: ========================= scanpci worked, XFree 3.6.x killed the box, even with the XF86Config file that worked on Redhat Linux 3.0.3 a) Output of dmesg -------------------- Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001 jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: Pentium/P54C (96.95-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x524 Stepping = 4 Features=0x7bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,oldMTRR> real memory = 201326592 (196608K bytes) avail memory = 191500288 (187012K bytes) Preloaded elf kernel "kernel" at 0xc044d000. Intel Pentium detected, installing workaround for F00F bug md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 isab0: <Intel 82375EB PCI-EISA bridge> at device 2.0 on pci0 eisa0: <EISA bus> on isab0 mainboard0: <ING2860 (System Board)> on eisa0 slot 0 isa0: <ISA bus> on isab0 lnc0: <PCNet/PCI Ethernet adapter> port 0xff80-0xff9f irq 9 at device 6.0 on pci0 lnc0: PCnet-32 VL-Bus address 08:00:36:30:75:02 lnc0: driver is using old-style compatibility shims ncr0: <ncr 53c810 fast10 scsi> port 0xfc00-0xfcff mem 0xffbdff00-0xffbdffff irq 10 at device 7.0 on pci0 pci0: <S3 Trio graphics accelerator> at 8.0 irq 11 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse Explorer, device ID 4 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 Waiting 15 seconds for SCSI devices to settle Mounting root from ufs:/dev/da1s1a da0 at ncr0 bus 0 target 0 lun 0 da0: <IBM DPES-31080 S31Q> Fixed Direct Access SCSI-2 device da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled da0: 1034MB (2118144 512 byte sectors: 255H 63S/T 131C) da1 at ncr0 bus 0 target 1 lun 0 da1: <IBM DPES-31080 S31Q> Fixed Direct Access SCSI-2 device da1: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled da1: 1034MB (2118144 512 byte sectors: 255H 63S/T 131C) cd0 at ncr0 bus 0 target 2 lun 0 cd0: <TOSHIBA CD-ROM XM-4101TA 1084> Removable CD-ROM SCSI-2 device cd0: 4.237MB/s transfers (4.237MHz, offset 8) cd0: cd present [329304 x 2048 byte records] b) Output of pciconf --------------------- chip0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x04a38086 rev=0x11 hdr=0x00 isab0@pci0:2:0: class=0x000000 card=0x00000000 chip=0x04828086 rev=0x04 hdr=0x00 lnc0@pci0:6:0: class=0x020000 card=0x00000000 chip=0x20001022 rev=0x02 hdr=0x00 ncr0@pci0:7:0: class=0x000000 card=0x00000000 chip=0x00011000 rev=0x01 hdr=0x00 none0@pci0:8:0: class=0x030000 card=0x00000000 chip=0x88115333 rev=0x00 hdr=0x00 c) Output of scanpci -v2 ------------------------ PCI says configuration type 2 PCI probing configuration type 2 pci bus 0x0 slot at 0xc000, vendor 0x8086 device 0x04a3 Intel 82434LX/NX pci cache mem controller CardVendor 0x0000 card 0x0000 STATUS 0xa400 COMMAND 0x0106 CLASS 0x06 0x00 0x00 REVISION 0x11 HEADER 0x00 LATENCY 0x20 pci bus 0x0 slot at 0xc200, vendor 0x8086 device 0x0482 Intel 82375EB pci-eisa bridge CardVendor 0x0000 card 0x0000 STATUS 0x0200 COMMAND 0x0007 CLASS 0x00 0x00 0x00 REVISION 0x04 BIST 0x00 HEADER 0x00 LATENCY 0xf8 CACHE 0x00 BYTE_0 0x60 BYTE_1 0x98 BYTE_2 0x03 BYTE_3 0x00 pci bus 0x0 slot at 0xc600, vendor 0x1022 device 0x2000 AMD 79C970 Lance CardVendor 0x0000 card 0x0000 STATUS 0x0200 COMMAND 0x0185 CLASS 0x02 0x00 0x00 REVISION 0x02 BASE0 0x0000ff81 addr 0x0000ff80 I/O MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x09 pci bus 0x0 slot at 0xc700, vendor 0x1000 device 0x0001 NCR 53C810 CardVendor 0x0000 card 0x0000 STATUS 0x0200 COMMAND 0x0007 CLASS 0x00 0x00 0x00 REVISION 0x01 BIST 0x00 HEADER 0x00 LATENCY 0xf8 CACHE 0x00 BASE0 0x0000fc01 addr 0x0000fc00 I/O BASE1 0xffbdff00 addr 0xffbdff00 MEM MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x0a pci bus 0x0 slot at 0xc800, vendor 0x5333 device 0x8811 S3 Trio32/64 CardVendor 0x0000 card 0x0000 STATUS 0x0200 COMMAND 0x0003 CLASS 0x03 0x00 0x00 REVISION 0x00 BASE0 0xff000000 addr 0xff000000 MEM BASEROM 0xffbe0000 addr 0xffbe0000 not-decode-enabled MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x0b That's all I've got. Cheers, Stefan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200303301930.h2UJUD9W080837>