Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 7 Jun 1996 12:32:30 -0700 (PDT)
From:      Steve Khoo <steve@gordian.com>
To:        freebsd-current@freebsd.org, freebsd-hackers@freebsd.org
Cc:        jfesler@calweb.com, lars@elbe.desy.de, Georg-Wilhelm.Koltermann@gordian.com, rminnich@Sarnoff.COM, steve@gordian.com
Subject:   Re: NFS problem: Irix 5.2 server, 2.2-960501-SNAP client
Message-ID:  <199606071932.MAA08925@delphi.gordian.com>
In-Reply-To: Steve Khoo's message of Wed, 5 Jun 1996 22:44:01 -0700 (PDT)
References:  <199606040148.SAA12823@delphi.gordian.com> <199606060544.WAA04867@delphi.gordian.com>

next in thread | previous in thread | raw e-mail | index | archive | help
    From: Steve Khoo <steve@delphi.gordian.com>
    Subject: Re: NFS problem: Irix 5.2 server, 2.2-960501-SNAP client
    To: freebsd-current@freebsd.org, freebsd-hackers@freebsd.org
    Date: Wed, 5 Jun 1996 22:44:01 -0700 (PDT)

    Help!!!  I haven't got even one response.  Am I the only one that have
    this problem?  Anyway, I tried the latest -current and rolled back to
    2.1R and still see the same problem with both.

    Thanks.

    SEK

	From: Steve Khoo <steve@delphi.gordian.com>
	Subject: NFS problem: Irix 5.2 server, 2.2-960501-SNAP client
	To: freebsd-current-digest@FreeBSD.ORG
	Date: Mon, 3 Jun 1996 18:48:31 -0700 (PDT)

	I have an interesting nfs problem...

	The server is running irix 5.2 and the client is running
	2.2-960501-SNAP.  The mount exit without any error, but when I
	do df, ls or pwd I get the following:

	# df
	Filesystem        1K-blocks     Used    Avail Capacity  Mounted on
	/dev/sd0a             49231    14290    31003    32%    /
	/dev/sd0s1f         1388387   446552   830765    35%    /usr
	/dev/sd0s1e           49231      797    44496     2%    /var
	procfs                    4        4        0   100%    /proc
	hermes:/n/hermes    1468230  1316047   152183    90%    /n/hermes
	hermes:/n/hermes2    997025   867008   130016    87%    /n/hermes2
	delphi:/n/delphi     639048   639048        0   100%    /n/delphi
	delphi:/n/delphi2    639048   639048        0   100%    /n/delphi2
	# cd /n/delphi
	# ls
	ls: .: Not a directory
	# pwd
	pwd: Not a directory
	# 

	The last two filesystems listed in df are the problem filesystems.

	The funny thing is, I can nfs mount another SGI(hermes) also running
	irix 5.2 without any problems.  The server with problems(delphi) is a
	Challenge S server and (hermes) is Indigo.  The only difference I can
	think of is, (hermes) was upgraded from irix 4.05 and the filesystem
	was created in irix 4.05.  All filesystems on (delphi) was created in
	irix 5.2.

	Any ideas?

	I'd appreciate any help.

	Thanks!

	SEK

Thanks for the all responses and suggestions...  It looks like the
problem is related to diskstriping on the Irix 5.2.  We've been
playing around with diskstriping on the sgi to improve performance.  I
truned off diskstriping and rebooted the sgi lastnight and all seems
to be fine now.  I supposed it is possible that the sgi was somehow
hosed and rebooting fixed it.  However, this is unlikely because nfs
mounts to other systems were still working; I did umount and mount on
sunos and hp machines to the sgi and worked without a problem.  I'll
have to test it again with striping truned ON on the sgi later, just
to double check; Since this sgi is a production unit, I can't be
rebooting it too many times.

Anyway, we are pretty impressed with this P6 unit so far.  We did some
benchmarking with a realworld example(we use a gcc cross-compiler for
embeded mips system and built one of our source tree), and here are
the resuls:

SGI		21 mins
P6(NFS)		16 mins
P6(local)	 7 mins

The source tree is on the SGI server.  P6(NFS) is the compile time for
the P6 with the source tree mounted via NFS from the SGI.  P6(local)
is with the source tree copied over to a local disk on P6.

System specs:

SGI Challenge S server (Irix 5.2)
150 Mhz R4600 MIPS Processor
160MB RAM
Fast Wide Differential SCSI Controller
Seagate Barracuda FWD SCSI drives: 2's and 4's
10BaseT NIC


P6 (FreeBSD 2.2-960501-SNAP, kernel rebuilt without FAILSAFE option
and all the other unnecessary drivers)
Intel Pentium Pro 200 Mhz CPU
64M EDO RAM
Asus P/I-P6RP4, Orion chipset stepping B0 motherboard
NCR Fast Wide Differential SCSI Controller
4G Seagate Barracuda FWD SCSI drive
SMC 9332DST 10/100BaseT DC2114 based NIC


SEK
----------------------------------------------------------------------
Steve E. Khoo				Gordian
Systems Manager				20361 Irvine Ave
Internet: steve@gordian.com		Santa Ana Heights, CA 92707
Phone: (714)850-0205			FAX: (714)850-0533
----------------------------------------------------------------------



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199606071932.MAA08925>