Date: Mon, 9 Dec 2002 23:46:34 +0100 From: Dimitry Andric <dim@xs4all.nl> To: FreeBSD Current List <current@freebsd.org> Subject: RC1 sysinstall hang Message-ID: <1439619692.20021209234634@xs4all.nl>
next in thread | raw e-mail | index | archive | help
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi,
Having tried 5.0-DP1 before on a certain box (see below for dmesg), I
tried booting a 5.0-RC1 CD on it. However, sysinstall always hangs at
"probing devices", although it reacts to ^C. Restarting it doesn't
really help, though, it simply hangs again. I've let it run for >30
minutes, but still nothing.
With -DP1, sysinstall had no problems, and that version is still
running on the box, giving the following dmesg:
==================
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-DP1 #0: Sun Apr 7 02:51:42 GMT 2002
murray@builder.freebsdmall.com:/usr/src/sys/i386/compile/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc053e000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc053e0a8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 451024348 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (451.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268423168 (262132K bytes)
avail memory = 255545344 (249556K bytes)
Pentium Pro MTRR support enabled
Using $PIR table, 8 entries at 0xc00f0d10
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS P2B-LS > on motherboard
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks GOOD min = 2, max = 4, width = 3
ACPI timer looks GOOD min = 2, max = 4, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 4
ACPI timer looks BAD min = 2, max = 5, width = 4
ACPI timer looks BAD min = 2, max = 5, width = 4
ACPI timer looks BAD min = 2, max = 5, width = 4
ACPI timer looks BAD min = 2, max = 16777187, width = 16777186
ACPI timer looks GOOD min = 2, max = 4, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 4
ACPI timer looks GOOD min = 2, max = 4, width = 3
Timecounter "ACPI-safe" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <PCI bus> on acpi_pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xd800-0xd80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd400-0xd41f irq 5 at device 4.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 4.3 (no driver attached)
ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xd000-0xd0ff mem 0xde800000-0xde800fff irq 5 at device 6.0 on pci0
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/255 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xb800-0xb81f mem 0xde000000-0xde0fffff,0xe1000000-0xe1000fff irq 10 at device 7.0 on pci0
fxp0: Ethernet address 00:e0:18:90:87:b2
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <multimedia, audio> at device 10.0 (no driver attached)
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s4a
da1 at ahc0 bus 0 target 1 lun 0
da1: <QUANTUM XP34550W LYK8> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da1: 4341MB (8890760 512 byte sectors: 255H 63S/T 553C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DRVS18V 0110> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 17519MB (35879135 512 byte sectors: 255H 63S/T 2233C)
da2 at ahc0 bus 0 target 2 lun 0
da2: <QUANTUM XP32275W LYK8> Fixed Direct Access SCSI-2 device
da2: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da2: 2170MB (4445380 512 byte sectors: 255H 63S/T 276C)
cd0 at ahc0 bus 0 target 4 lun 0
cd0: <PLEXTOR CD-ROM PX-32TS 1.02> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ahc0 bus 0 target 5 lun 0
cd1: <TOSHIBA DVD-ROM SD-M1201 1R08> Removable CD-ROM SCSI-2 device
cd1: 20.000MB/s transfers (20.000MHz, offset 16)
cd1: Attempt to query device size failed: NOT READY, Medium not present
cd2 at ahc0 bus 0 target 6 lun 0
cd2: <HP CD-Writer+ 9200 1.0e> Removable CD-ROM SCSI-4 device
cd2: 10.000MB/s transfers (10.000MHz, offset 15)
cd2: Attempt to query device size failed: NOT READY, Medium not present
da3 at ahc0 bus 0 target 3 lun 0
da3: <IOMEGA ZIP 100 E.08> Removable Direct Access SCSI-2 device
da3: 3.300MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
==================
If anyone has suggestions on how to get sysinstall to stop hanging,
please let me know. :-)
Cheers,
- --
Dimitry Andric <dim@xs4all.nl>
PGP Key: http://www.xs4all.nl/~dim/dim.asc
Fingerprint: 7AB462D2CE35FC6D42394FCDB05EA30A2E2096A3
Lbh whfg ivbyngrq gur QZPN naq jvyy or cebfrphgrq
-----BEGIN PGP SIGNATURE-----
Version: 6.5.8ckt http://www.ipgpp.com/
Comment: http://duncan.gn.apc.org/stoa_cover.htm
iQA/AwUBPfUPRLBeowouIJajEQJcxgCePV2iNh6kjuV7Xvfo4wTHR2zB6NgAoLdn
Xqo3UXMCxHTBciPhWeBC8sVf
=DdC7
-----END PGP SIGNATURE-----
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1439619692.20021209234634>