Date: Sat, 09 Jun 2001 05:41:01 -0700 From: Kent Stewart <kstewart@urx.com> To: Doug Poland <doug@polands.org> Cc: freebsd-questions@freebsd.org Subject: Re: HELP! Cannot boot after changing from ATA66 to ATA100 Message-ID: <3B22195D.8DA23659@urx.com> References: <20010608232534.A3382@polands.org> <3B21AFE7.43FB8EAB@urx.com> <20010609071329.A13883@polands.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Doug Poland wrote: > > On Fri, Jun 08, 2001 at 10:11:03PM -0700, Kent Stewart wrote: > > > > > > Doug Poland wrote: > > > > > > The good news: I discovered my IBM DTLA drive was connected > > > to my VIA ATA66 controller and was able to move it to my Promise > > > ATA100 controller socket. > > > > > > The bad news: I cannot boot! The device names of my harddrive > > > have changed. This is what it looked like before: (4.3-STABLE) > > > > Move it back and build a kernel with "ATA_STATIC_ID" commented out. > > > Okay > > > > > Change your fstab to sequential devices > > > I don't understand what this means. Are you saying change my fstab > to reflect what the new names will be? ad1, ad2? That is how they showed up when I made the ATA_STATIC_ID change. They probably started out with /dev/ad0 and /dev/ad1 and etc. Kent > > > > > make the other devices just in case. > > > Check > > > Reboot and see if you have it right. If you do, then, move your cable back > > to the ATA-100 controller and try it. Your drives should start with ata1, > > ata2, and etc. > > > > Kent > > > Thanks for the help so far! > > -- > Regards, > Doug -- Kent Stewart Richland, WA mailto:kbstew99@hotmail.com http://kstewart.urx.com/kstewart/index.html http://daily.daemonnews.org/ SETI (Search for Extraterrestrial Intelligence) @ Home http://setiathome.ssl.berkeley.edu/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3B22195D.8DA23659>