Date: Tue, 25 Jan 2000 09:21:52 -0800 (PST) From: LukeUnix <lukeunix@infosite.com> To: freebsd-scsi@freebsd.org Subject: CMD problems Message-ID: <200001251721.JAA32558@infosite.com>
next in thread | raw e-mail | index | archive | help
I am having problems with a CMD CRD-5440 with multiple luns. The config is 2 drive trays, each on their own channel on the CMD, and one host channel to the FreeBSD 3.4 box. I was not experiencing these problems untill the 2nd drive tray was added, making the CMD use 2 luns. So far I have tried to set the number of max tags by editing sys/cam/cam_xpt.c and adding the following entry. /* Reports QUEUE FULL for temporary resource shortages */ { T_DIRECT, SIP_MEDIA_FIXED, "CMD TECH", "CRD-5440*", "*" }, /*quirks*/0, /*mintags*/24, /*maxtags*/32 That does not seem to have helped.. The following are scsi errors I am seeing. /kernel: (da2:ahc1:0:1:0): SCB 0x18 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0xa /kernel: (da2:ahc1:0:1:0): Queuing a BDR SCB /kernel: (da2:ahc1:0:1:0): Bus Device Reset Message Sent /kernel: (da2:ahc1:0:1:0): no longer in timeout, status = 34b /kernel: ahc1: Bus Device Reset on A:1. 2 SCBs aborted /kernel: (da2:ahc1:0:1:0): SCB 0x28 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x9 /kernel: (da2:ahc1:0:1:0): Queuing a BDR SCB /kernel: (da2:ahc1:0:1:0): Bus Device Reset Message Sent /kernel: (da2:ahc1:0:1:0): no longer in timeout, status = 34b /kernel: ahc1: Bus Device Reset on A:1. 31 SCBs aborted Some info on the system.. <IBM DORS-32160W WA0A> at scbus0 target 0 lun 0 (pass0,da0) <SGI IBM DCHS04Y 3030> at scbus0 target 2 lun 0 (pass1,da1) <CMD TECH CRD-5440-4 C1-9> at scbus1 target 1 lun 0 (pass2,da2) <CMD TECH CRD-5440-4 C1-9> at scbus1 target 1 lun 1 (pass3,da3) <IBM DORS-32160W WA0A> at scbus2 target 0 lun 0 (pass4,da4) <SGI IBM DCHS04Y 3030> at scbus2 target 1 lun 0 (pass5,da5) fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x02 int a irq 10 on pci0.6.0 fxp0: Ethernet address 00:a0:c9:55:fe:eb chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0 ahc0: <Adaptec aic7880 Ultra SCSI adapter> rev 0x00 int a irq 11 on pci0.9.0 ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs chip2: <DEC 21050 PCI-PCI bridge> rev 0x02 on pci0.11.0 fxp1: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x01 int a irq 11 on pci0.15.0 fxp1: Ethernet address 00:a0:c9:27:cd:1d vga0: <Trident model 9660 VGA-compatible display device> rev 0xd3 int a irq 11 on pci0.19.0 Probing for devices on PCI bus 1: ahc1: <Adaptec 3940 Ultra SCSI adapter> rev 0x00 int a irq 11 on pci1.4.0 ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs ahc2: <Adaptec 3940 Ultra SCSI adapter> rev 0x00 int a irq 11 on pci1.5.0 ahc2: aic7880 Wide Channel B, SCSI Id=7, 16/255 SCBs da0 at ahc0 bus 0 target 0 lun 0 da0: <IBM DORS-32160W WA0A> Fixed Direct Access SCSI-2 device da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C) da4 at ahc2 bus 0 target 0 lun 0 da4: <IBM DORS-32160W WA0A> Fixed Direct Access SCSI-2 device da4: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da4: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C) da1 at ahc0 bus 0 target 2 lun 0 da1: <SGI IBM DCHS04Y 3030> Fixed Direct Access SCSI-2 device da1: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled da1: 4340MB (8888543 512 byte sectors: 255H 63S/T 553C) da5 at ahc2 bus 0 target 1 lun 0 da5: <SGI IBM DCHS04Y 3030> Fixed Direct Access SCSI-2 device da5: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da5: 4340MB (8888543 512 byte sectors: 255H 63S/T 553C) Any ideas on this one? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200001251721.JAA32558>