Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 22 Mar 2009 22:03:49 +0300
From:      Alex Keda <admin@lissyara.su>
To:        Robert Noland <rnoland@FreeBSD.org>
Cc:        freebsd-current@freebsd.org
Subject:   Re: last update and oldest ati|drm problems
Message-ID:  <49C68B95.5020402@lissyara.su>
In-Reply-To: <1237745742.1687.12.camel@balrog.2hip.net>
References:  <49C64AA5.3000509@lissyara.su>	<1237743234.1687.7.camel@balrog.2hip.net>	<49C67E10.2000202@lissyara.su> <1237745742.1687.12.camel@balrog.2hip.net>

next in thread | previous in thread | raw e-mail | index | archive | help
Robert Noland пишет:
> On Sun, 2009-03-22 at 21:06 +0300, Alex Keda wrote:
>> Robert Noland пишет:
>>> On Sun, 2009-03-22 at 17:26 +0300, Alex Keda wrote:
>>>> (II) RADEON(0): XAA Render acceleration unsupported on Radeon
>>>> 9500/9700 and newer. Please use EXA instead.
>>> Everything looks like it's ok, except that you should be using EXA.
>>>
>>> Option "AccelMethod" "EXA"
>> I'm not using Xorg.conf - I always start without it - all work OK.
>> X-system by oneself configure all parameters.
>>
>>> What was the last working kernel?
>> FreeBSD HP.lissyara.su 8.0-CURRENT FreeBSD 8.0-CURRENT #0: Sat Mar 14 
>> 19:08:30 MSK 2009 
>> lissyara@HP.lissyara.su:/usr/obj/usr/src/sys/GENERIC  amd64
>>
>>  >Actually, It looks like maybe it is waiting on hald?  Did you just
>> switch to usb2?
>> Yes, I use GENERIC. But, old kernel with new USB stack and work correct.
> 
> Please make sure that hald is running and that lshal shows you mouse and
> keyboard before we go digging any further.
it show my mouse, my keyboard and my touchpad

> The rs690 is picky about how the gart is allocated, but I had the flags
> to bus_dmamem applied incorrectly.  It should not have caused an issue
> and all of the allocations look to be correct.
> 
> You should probably not be running configless on this chip, as the
> defaults are not optimum for it.
I remove drm.ko and radeon.ko from /boot/kernel and copy it from 
/boot/kernel.old
With new kernel and old modules - all work excellent.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?49C68B95.5020402>