Date: Sat, 28 Jul 2001 15:44:38 -0400 (EDT) From: Matthew Emmerton <matt@gsicomp.on.ca> To: Hans Zaunere <zaunere@yahoo.com> Cc: questions@FreeBSD.ORG Subject: Re: D-Link DFE-530TX+ Support Message-ID: <Pine.BSF.4.21.0107281541320.5589-100000@xena.gsicomp.on.ca> In-Reply-To: <20010727230552.86490.qmail@web12803.mail.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
This card (and it's sister card, the DFE-538TX/R) both use the rl0 chipset. Patches to support these cards have been submitted to the maintainer of the rl0 driver and via send-pr, but they haven't made it to -stable yet. See PR # 25640 and PR # 25566 and PR # 29027 for patches. -- Matthew Emmerton || matt@gsicomp.on.ca GSI Computer Services || http://www.gsicomp.on.ca On Fri, 27 Jul 2001, Hans Zaunere wrote: > Hello, > > I've just installed the PCI D-Link DFE-530TX+ card > with the generic kernel and no mention of it is made > in either dmesg or ifconfig -a. The only thing I see > in dmesg is: > > pci0: <unknown card> (vendor=0x1186, dev=0x1300) at > 16.0 irq 11 > > I've done some research and found that this card's > prior version, (without the '+') worked fine, but this > version, which has WOL needs some tweaking, but will > work fine after manually setting the media type. I do > not need to use the WOL feature. I've read that this > '+' card uses the Realtek 8139 chipset. I also notice > that the GENERIC kernel has rl support built in, > however nothing is working still. > > Could anyone tell me how to get this card working? > Either something to read, something to download, or > something to do with the kernel. And someone tell me, > if once this card works, is it good? Anything would > be great, > > Thank you, > > Hans Z. > zaunere@yahoo.com > > > > __________________________________________________ > Do You Yahoo!? > Make international calls for as low as $.04/minute with Yahoo! Messenger > http://phonecard.yahoo.com/ > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0107281541320.5589-100000>